diff mbox series

[10/16] arm64: dts: juno: usb: Use proper DT node name

Message ID 20200505165212.76466-11-andre.przywara@arm.com
State New
Headers show
Series dts/dt-bindings: Fix Arm Ltd. ARMv8 "boards" | expand

Commit Message

Andre Przywara May 5, 2020, 4:52 p.m. UTC
The EHCI/OCHI DT binding requires to use "usb" as the node name stub.

Replace the existing name with "usb" to comply with the binding.
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 65b6176f76a5..1374e72951c0 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -768,7 +768,7 @@ 
 		};
 	};
 
-	ohci@7ffb0000 {
+	usb@7ffb0000 {
 		compatible = "generic-ohci";
 		reg = <0x0 0x7ffb0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
@@ -776,7 +776,7 @@ 
 		clocks = <&soc_usb48mhz>;
 	};
 
-	ehci@7ffc0000 {
+	usb@7ffc0000 {
 		compatible = "generic-ehci";
 		reg = <0x0 0x7ffc0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;