diff mbox series

[3/4] arm64: dts: qcom: db820c: Add s2 regulator in pmi8994

Message ID 20200319053902.3415984-4-bjorn.andersson@linaro.org
State New
Headers show
Series [1/4] clk: qcom: gdsc: Handle GDSC regulator supplies | expand

Commit Message

Bjorn Andersson March 19, 2020, 5:39 a.m. UTC 
From: Rajendra Nayak <rnayak@codeaurora.org>

Add the SPMI regulator node in the PMI8994, use it to give us VDD_GX
at a fixed max nominal voltage for the db820c and specify this as supply
for the MMSS GPU_GX GDSC.

With the introduction of CPR support the range for VDD_GX should be
expanded.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
[bjorn: Split between pmi8994 and db820c, changed voltage, rewrote commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 14 ++++++++++++++
 arch/arm64/boot/dts/qcom/pmi8994.dtsi        |  6 ++++++
 2 files changed, 20 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 4692b7ad16b7..075cebaec3f3 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -251,6 +251,10 @@  &mdss {
 	status = "okay";
 };
 
+&mmcc {
+	vdd_gfx-supply = <&vdd_gfx>;
+};
+
 &msmgpio {
 	gpio-line-names =
 		"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
@@ -688,6 +692,16 @@  pinconf {
 	};
 };
 
+
+&pmi8994_spmi_regulators {
+	vdd_gfx: s2@1700 {
+		reg = <0x1700 0x100>;
+		regulator-name = "VDD_GFX";
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
+	};
+};
+
 &rpm_requests {
 	pm8994-regulators {
 		compatible = "qcom,rpm-pm8994-regulators";
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index 21e05215abe4..e5ed28ab9b2d 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -26,5 +26,11 @@  pmic@3 {
 		reg = <0x3 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pmi8994_spmi_regulators: regulators {
+			compatible = "qcom,pmi8994-regulators";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };