@@ -18,6 +18,29 @@
"kontron,sl28", "fsl,ls1028a";
};
+&enetc_mdio_pf3 {
+ /* BCM54140 QSGMII quad PHY */
+ qsgmii_phy0: ethernet-phy@7 {
+ reg = <7>;
+ };
+
+ qsgmii_phy1: ethernet-phy@8 {
+ reg = <8>;
+ };
+
+ qsgmii_phy2: ethernet-phy@9 {
+ reg = <9>;
+ };
+
+ qsgmii_phy3: ethernet-phy@10 {
+ reg = <10>;
+ };
+};
+
+&enetc_port2 {
+ status = "okay";
+};
+
&i2c3 {
eeprom@57 {
compatible = "atmel,24c32";
@@ -25,3 +48,40 @@
pagesize = <32>;
};
};
+
+&mscc_felix_port0 {
+ label = "swp0";
+ managed = "in-band-status";
+ phy-handle = <&qsgmii_phy0>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&mscc_felix_port1 {
+ label = "swp1";
+ managed = "in-band-status";
+ phy-handle = <&qsgmii_phy1>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&mscc_felix_port2 {
+ label = "swp2";
+ managed = "in-band-status";
+ phy-handle = <&qsgmii_phy2>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&mscc_felix_port3 {
+ label = "swp3";
+ managed = "in-band-status";
+ phy-handle = <&qsgmii_phy3>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&mscc_felix_port4 {
+ ethernet = <&enetc_port2>;
+ status = "okay";
+};
The KBox A-230-LS supports four external ports which are connected to the internal switch of the LS1028A via QSGMII. Now that the Felix switch is supported, add these ports in the device tree. Signed-off-by: Michael Walle <michael@walle.cc> --- .../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+)