diff mbox series

[v2,3/3] ARM: dts: sun7i: Add Linutronix Testbox v2 board

Message ID 20200214111003.11115-4-bage@linutronix.de
State New
Headers show
Series dts: Add Linutronix Testbox | expand

Commit Message

bage@linutronix.de Feb. 14, 2020, 11:10 a.m. UTC 
From: Bastian Germann <bage@linutronix.de>

The Testbox board is an open hardware enhancement for the Lamobo R1 router
board.  The Testbox board is used in the CI-RT project to manage devices
under test (https://ci-rt.linutronix.de).

The hardware project is located at https://github.com/ci-rt/testbox-shield

The Testbox v2 expands the Lamobo R1 router board with
- a power supply,
- a CAN bus PHY,
- a power control,
- a relay,
- an I2C EEPROM,
- a secure key storage (ATECC608a) and
- two RS232 compliant serial ports.

Co-developed-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Bastian Germann <bage@linutronix.de>
---
 arch/arm/boot/dts/Makefile                    |  1 +
 .../dts/sun7i-a20-linutronix-testbox-v2.dts   | 56 +++++++++++++++++++
 2 files changed, 57 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d6546d2676b9..e9ddca2946ce 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1086,6 +1086,7 @@  dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-i12-tvbox.dtb \
 	sun7i-a20-icnova-swac.dtb \
 	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
 	sun7i-a20-m3.dtb \
 	sun7i-a20-mk808c.dtb \
 	sun7i-a20-olimex-som-evb.dtb \
diff --git a/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts
new file mode 100644
index 000000000000..685874d44e35
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts
@@ -0,0 +1,56 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2020 Linutronix GmbH
+ * Author: Benedikt Spranger <b.spranger@linutronix.de>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-lamobo-r1.dts"
+
+/ {
+	model = "Lamobo R1";
+	compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	leds {
+		led-opto1 {
+			label = "lamobo_r1:opto:powerswitch";
+			gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-opto2 {
+			label = "lamobo_r1:opto:relay";
+			gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		status = "okay";
+	};
+
+	atecc508a@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+};
+
+&pio {
+	led_pins_lamobo_r1: led-pins {
+		pins = "PH3", "PH5", "PH24";
+		function = "gpio_out";
+		drive-strength = <40>;
+		bias-disable;
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can_ph_pins>;
+	status = "okay";
+};