diff mbox series

[v6,07/18] dt-bindings: usb: dwc3: Add a gpio-usb-connector example

Message ID 20200210120723.91794-8-bryan.odonoghue@linaro.org
State New
Headers show
Series None | expand

Commit Message

Bryan O'Donoghue Feb. 10, 2020, 12:07 p.m. UTC 
A USB connector should be a child node of the USB controller
connector/usb-connector.txt. This patch adds an example of how to do this
to the dwc3 binding descriptions.

It is necessary to declare a connector as a child-node of a USB controller
for role-switching to work, so this example should be helpful to others
implementing that.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 Documentation/devicetree/bindings/usb/dwc3.txt | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 66780a47ad85..4e1e4afccee6 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -121,4 +121,12 @@  dwc3@4a030000 {
 	interrupts = <0 92 4>
 	usb-phy = <&usb2_phy>, <&usb3,phy>;
 	snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+
+	usb_con: connector {
+		compatible = "gpio-usb-b-connector";
+		id-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+		vbus-supply = <&usb3_vbus_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_id_pin>, <&usb3_vbus_pin>;
+	};
 };