diff mbox series

[v3,01/14] dt-bindings: phy: Sierra: Add bindings for Sierra in TI's J721E

Message ID 20191128104648.21894-2-kishon@ti.com
State Superseded
Headers show
Series PHY: Add support for SERDES in TI's J721E SoC | expand

Commit Message

Kishon Vijay Abraham I Nov. 28, 2019, 10:46 a.m. UTC 
Add DT binding documentation for Sierra PHY IP used in TI's J721E
SoC.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

---
 .../devicetree/bindings/phy/phy-cadence-sierra.txt  | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

-- 
2.17.1

Comments

Rob Herring (Arm) Dec. 13, 2019, 8:54 p.m. UTC | #1 
On Thu, 28 Nov 2019 16:16:35 +0530, Kishon Vijay Abraham I wrote:
> Add DT binding documentation for Sierra PHY IP used in TI's J721E

> SoC.

> 

> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

> ---

>  .../devicetree/bindings/phy/phy-cadence-sierra.txt  | 13 ++++++++-----

>  1 file changed, 8 insertions(+), 5 deletions(-)

> 


Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
index 6e1b47bfce43..03f5939d3d19 100644
--- a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
@@ -2,21 +2,24 @@  Cadence Sierra PHY
 -----------------------
 
 Required properties:
-- compatible:	cdns,sierra-phy-t0
-- clocks:	Must contain an entry in clock-names.
-		See ../clocks/clock-bindings.txt for details.
-- clock-names:	Must be "phy_clk"
+- compatible:	Must be "cdns,sierra-phy-t0" for Sierra in Cadence platform
+		Must be "ti,sierra-phy-t0" for Sierra in TI's J721E SoC.
 - resets:	Must contain an entry for each in reset-names.
 		See ../reset/reset.txt for details.
 - reset-names:	Must include "sierra_reset" and "sierra_apb".
 		"sierra_reset" must control the reset line to the PHY.
 		"sierra_apb" must control the reset line to the APB PHY
-		interface.
+		interface ("sierra_apb" is optional).
 - reg:		register range for the PHY.
 - #address-cells: Must be 1
 - #size-cells:	Must be 0
 
 Optional properties:
+- clocks:		Must contain an entry in clock-names.
+			See ../clocks/clock-bindings.txt for details.
+- clock-names:		Must contain "cmn_refclk_dig_div" and
+			"cmn_refclk1_dig_div" for configuring the frequency of
+			the clock to the lanes. "phy_clk" is deprecated.
 - cdns,autoconf:	A boolean property whose presence indicates that the
 			PHY registers will be configured by hardware. If not
 			present, all sub-node optional properties must be