diff mbox series

[3/4] regulator: Add regulator driver for ATC260x PMICs

Message ID 20190617155011.15376-4-manivannan.sadhasivam@linaro.org
State New
Headers show
Series Add MFD/Regulator support for ATC260x PMICs | expand

Commit Message

Manivannan Sadhasivam June 17, 2019, 3:50 p.m. UTC
Add regulator driver for Actions Semi ATC260x PMICs. This driver
supports 5 DC-DC converters and 10 LDO regulators found in ATC2609A
PMIC variant.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

---
 drivers/regulator/Kconfig             |   8 +
 drivers/regulator/Makefile            |   1 +
 drivers/regulator/atc260x-regulator.c | 389 ++++++++++++++++++++++++++
 3 files changed, 398 insertions(+)
 create mode 100644 drivers/regulator/atc260x-regulator.c

-- 
2.17.1

Comments

Mark Brown June 17, 2019, 4:30 p.m. UTC | #1
On Mon, Jun 17, 2019 at 09:20:10PM +0530, Manivannan Sadhasivam wrote:

> +++ b/drivers/regulator/atc260x-regulator.c

> @@ -0,0 +1,389 @@

> +// SPDX-License-Identifier: GPL-2.0+

> +/*

> + * Regulator driver for ATC260x PMICs


Please make the entire comment a C++ one so this looks more intentional.

> + * Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>


You definitely didn't assign copyright to your employer?
Manivannan Sadhasivam June 17, 2019, 4:34 p.m. UTC | #2
Hi Mark,

On Mon, Jun 17, 2019 at 05:30:15PM +0100, Mark Brown wrote:
> On Mon, Jun 17, 2019 at 09:20:10PM +0530, Manivannan Sadhasivam wrote:

> 

> > +++ b/drivers/regulator/atc260x-regulator.c

> > @@ -0,0 +1,389 @@

> > +// SPDX-License-Identifier: GPL-2.0+

> > +/*

> > + * Regulator driver for ATC260x PMICs

> 

> Please make the entire comment a C++ one so this looks more intentional.

> 


Okay.

> > + * Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> 

> You definitely didn't assign copyright to your employer?


Yeah, that was intentional. This work is not part of Linaro working hours and
falls into my spare time works where I'm trying to complete the upstream support
for Actions Semi Owl series SoCs and target boards which I'm co-maintaining
(sort of)...

Thanks,
Mani
Andreas Färber June 17, 2019, 4:38 p.m. UTC | #3
Hi,

Am 17.06.19 um 18:34 schrieb Manivannan Sadhasivam:
> On Mon, Jun 17, 2019 at 05:30:15PM +0100, Mark Brown wrote:

>> On Mon, Jun 17, 2019 at 09:20:10PM +0530, Manivannan Sadhasivam wrote:

>>

>>> +++ b/drivers/regulator/atc260x-regulator.c

>>> @@ -0,0 +1,389 @@

>>> +// SPDX-License-Identifier: GPL-2.0+

>>> +/*

>>> + * Regulator driver for ATC260x PMICs

>>

>> Please make the entire comment a C++ one so this looks more intentional.


No, this is intentional and the official style requested by GregKH.

He suggested I patch the SPDX documentation to make this clearer, but I
did not find time for this yet (and am not the one making this rule).

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Mary Higgins, Sri Rasiah
HRB 21284 (AG Nürnberg)
Mark Brown June 17, 2019, 4:54 p.m. UTC | #4
On Mon, Jun 17, 2019 at 06:38:53PM +0200, Andreas Färber wrote:
> Am 17.06.19 um 18:34 schrieb Manivannan Sadhasivam:

> > On Mon, Jun 17, 2019 at 05:30:15PM +0100, Mark Brown wrote:


> >>> @@ -0,0 +1,389 @@

> >>> +// SPDX-License-Identifier: GPL-2.0+

> >>> +/*

> >>> + * Regulator driver for ATC260x PMICs


> >> Please make the entire comment a C++ one so this looks more intentional.


> No, this is intentional and the official style requested by GregKH.


The important bit for the tools is the first line, the rest of it the
tools don't care about.

> He suggested I patch the SPDX documentation to make this clearer, but I

> did not find time for this yet (and am not the one making this rule).


The other regulator API files are all the way I suggest...
Mark Brown June 17, 2019, 5:03 p.m. UTC | #5
On Mon, Jun 17, 2019 at 10:04:13PM +0530, Manivannan Sadhasivam wrote:

> > > + * Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>


> > You definitely didn't assign copyright to your employer?


> Yeah, that was intentional. This work is not part of Linaro working hours and

> falls into my spare time works where I'm trying to complete the upstream support

> for Actions Semi Owl series SoCs and target boards which I'm co-maintaining

> (sort of)...


OK...  seems very weird to use your work address for developing on
products closely associated with your employer in non-work time.
Greg Kroah-Hartman June 17, 2019, 8:30 p.m. UTC | #6
On Mon, Jun 17, 2019 at 06:38:53PM +0200, Andreas Färber wrote:
> Hi,

> 

> Am 17.06.19 um 18:34 schrieb Manivannan Sadhasivam:

> > On Mon, Jun 17, 2019 at 05:30:15PM +0100, Mark Brown wrote:

> >> On Mon, Jun 17, 2019 at 09:20:10PM +0530, Manivannan Sadhasivam wrote:

> >>

> >>> +++ b/drivers/regulator/atc260x-regulator.c

> >>> @@ -0,0 +1,389 @@

> >>> +// SPDX-License-Identifier: GPL-2.0+

> >>> +/*

> >>> + * Regulator driver for ATC260x PMICs

> >>

> >> Please make the entire comment a C++ one so this looks more intentional.

> 

> No, this is intentional and the official style requested by GregKH.


Mark likes them all to be // at the top of the file.

I only required that the SPDX line be that way.

Mark can ask for more if he wants to :)

thanks,

greg k-h
Mark Brown June 18, 2019, 10:44 a.m. UTC | #7
On Tue, Jun 18, 2019 at 09:13:24AM +0100, Lee Jones wrote:
> On Mon, 17 Jun 2019, Mark Brown wrote:


> > OK...  seems very weird to use your work address for developing on

> > products closely associated with your employer in non-work time.


> I use my Linaro address for everything.  So long as the work is of the

> required standard, I cannot see anyone having reservations.


It's not a problem to use it - I was querying the copyright statement
due to the Linaro address and work in conjunction with the non-Linaro
copyright to make sure it wasn't a mistake.
diff mbox series

Patch

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8553bdf87c1d..acaf447ecdc6 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -166,6 +166,14 @@  config REGULATOR_AS3722
 	  AS3722 PMIC. This will enable support for all the software
 	  controllable DCDC/LDO regulators.
 
+config REGULATOR_ATC260X
+	tristate "Actions Semi ATC260x PMIC Regulators"
+	depends on MFD_ATC260X
+	help
+	  This driver provides support for the voltage regulators on the
+	  ATC260x PMICs. This will enable support for all the software
+	  controllable DCDC/LDO regulators.
+
 config REGULATOR_AXP20X
 	tristate "X-POWERS AXP20X PMIC Regulators"
 	depends on MFD_AXP20X
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 93f53840e8f1..600d01d082a3 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -25,6 +25,7 @@  obj-$(CONFIG_REGULATOR_ARIZONA_LDO1) += arizona-ldo1.o
 obj-$(CONFIG_REGULATOR_ARIZONA_MICSUPP) += arizona-micsupp.o
 obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
 obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
+obj-$(CONFIG_REGULATOR_ATC260X) += atc260x-regulator.o
 obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
 obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
 obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o
diff --git a/drivers/regulator/atc260x-regulator.c b/drivers/regulator/atc260x-regulator.c
new file mode 100644
index 000000000000..e9e11f2567b2
--- /dev/null
+++ b/drivers/regulator/atc260x-regulator.c
@@ -0,0 +1,389 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Regulator driver for ATC260x PMICs
+ *
+ * Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <linux/mfd/atc260x/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+#define ATC2609A_DCDC_VSEL_MASK 0xff00
+#define ATC2609A_DCDC_MIN_UV 600000
+#define ATC2609A_DCDC_UV_STEP 6250
+#define ATC2609A_DCDC_NR_VOLT 256
+
+#define ATC2609A_LDO_VSEL_MASK0 0x003c
+#define ATC2609A_LDO_VSEL_MASK1 0x001e
+#define ATC2609A_LDO_VSEL_MASK2 0xe000
+#define ATC2609A_LDO_VSEL_RANGE_MASK 0x0020
+
+static const struct regulator_linear_range atc260x_ldo_voltage_ranges0[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0, 15, 100000),
+	REGULATOR_LINEAR_RANGE(2100000, 16, 28, 100000),
+};
+
+static const struct regulator_linear_range atc260x_ldo_voltage_ranges1[] = {
+	REGULATOR_LINEAR_RANGE(850000, 0, 15, 100000),
+	REGULATOR_LINEAR_RANGE(2100000, 16, 27, 100000),
+};
+
+static const unsigned int atc260x_ldo_voltage_range_sel[] = {
+	0x0, 0x1,
+};
+
+static const struct regulator_linear_range atc260x_dcdc_voltage_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 127, 6250),
+	REGULATOR_LINEAR_RANGE(1400000, 128, 232, 25000),
+};
+
+static const struct regulator_ops atc260x_reg_ops = {
+	.enable	= regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static const struct regulator_ops atc260x_reg_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static const struct regulator_ops atc260x_reg_range0_ops = {
+	.enable	= regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_pickable_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_pickable_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
+};
+
+static const struct regulator_ops atc260x_reg_range1_ops = {
+	.enable	= regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static const struct regulator_desc atc2609a_reg[] = {
+	{
+		.name = "DCDC_REG0",
+		.supply_name = "vcc0",
+		.of_match = of_match_ptr("DCDC_REG0"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ATC2609A_ID_DCDC0,
+		.ops = &atc260x_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = ATC2609A_DCDC_MIN_UV,
+		.uV_step = ATC2609A_DCDC_UV_STEP,
+		.n_voltages = ATC2609A_DCDC_NR_VOLT,
+		.vsel_reg = ATC2609A_PMU_DC0_CTL0,
+		.vsel_mask = ATC2609A_DCDC_VSEL_MASK,
+		.enable_reg = ATC2609A_PMU_DC_OSC,
+		.enable_mask = BIT(4),
+		.enable_time = 800,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "DCDC_REG1",
+		.supply_name = "vcc1",
+		.of_match = of_match_ptr("DCDC_REG1"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ATC2609A_ID_DCDC1,
+		.ops = &atc260x_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = ATC2609A_DCDC_MIN_UV,
+		.uV_step = ATC2609A_DCDC_UV_STEP,
+		.n_voltages = ATC2609A_DCDC_NR_VOLT,
+		.vsel_reg = ATC2609A_PMU_DC1_CTL0,
+		.vsel_mask = ATC2609A_DCDC_VSEL_MASK,
+		.enable_reg = ATC2609A_PMU_DC_OSC,
+		.enable_mask = BIT(5),
+		.enable_time = 800,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "DCDC_REG2",
+		.supply_name = "vcc2",
+		.of_match = of_match_ptr("DCDC_REG2"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ATC2609A_ID_DCDC2,
+		.ops = &atc260x_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = ATC2609A_DCDC_MIN_UV,
+		.uV_step = ATC2609A_DCDC_UV_STEP,
+		.n_voltages = ATC2609A_DCDC_NR_VOLT,
+		.vsel_reg = ATC2609A_PMU_DC2_CTL0,
+		.vsel_mask = ATC2609A_DCDC_VSEL_MASK,
+		.enable_reg = ATC2609A_PMU_DC_OSC,
+		.enable_mask = BIT(6),
+		.enable_time = 800,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "DCDC_REG3",
+		.supply_name = "vcc3",
+		.of_match = of_match_ptr("DCDC_REG3"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ATC2609A_ID_DCDC3,
+		.ops = &atc260x_reg_range1_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 233,
+		.linear_ranges = atc260x_dcdc_voltage_ranges,
+		.n_linear_ranges = ARRAY_SIZE(atc260x_dcdc_voltage_ranges),
+		.vsel_reg = ATC2609A_PMU_DC3_CTL0,
+		.vsel_mask = ATC2609A_DCDC_VSEL_MASK,
+		.enable_reg = ATC2609A_PMU_DC_OSC,
+		.enable_mask = BIT(7),
+		.enable_time = 800,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "DCDC_REG4",
+		.supply_name = "vcc4",
+		.of_match = of_match_ptr("DCDC_REG4"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ATC2609A_ID_DCDC4,
+		.ops = &atc260x_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = ATC2609A_DCDC_MIN_UV,
+		.uV_step = ATC2609A_DCDC_UV_STEP,
+		.n_voltages = ATC2609A_DCDC_NR_VOLT,
+		.vsel_reg = ATC2609A_PMU_DC4_CTL0,
+		.vsel_mask = ATC2609A_DCDC_VSEL_MASK,
+		.enable_reg = ATC2609A_PMU_DC_OSC,
+		.enable_mask = BIT(8),
+		.enable_time = 800,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "LDO_REG0",
+		.supply_name = "vcc5",
+		.of_match = of_match_ptr("LDO_REG0"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ATC2609A_ID_LDO0,
+		.ops = &atc260x_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = 2300000,
+		.uV_step = 100000,
+		.n_voltages = 12,
+		.vsel_reg = ATC2609A_PMU_LDO0_CTL0,
+		.vsel_mask = ATC2609A_LDO_VSEL_MASK0,
+		.enable_reg = ATC2609A_PMU_LDO0_CTL0,
+		.enable_mask = BIT(0),
+		.enable_time = 2000,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "LDO_REG1",
+		.supply_name = "vcc6",
+		.of_match = of_match_ptr("LDO_REG1"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ATC2609A_ID_LDO1,
+		.ops = &atc260x_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = 2300000,
+		.uV_step = 100000,
+		.n_voltages = 12,
+		.vsel_reg = ATC2609A_PMU_LDO1_CTL0,
+		.vsel_mask = ATC2609A_LDO_VSEL_MASK0,
+		.enable_reg = ATC2609A_PMU_LDO1_CTL0,
+		.enable_mask = BIT(0),
+		.enable_time = 2000,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "LDO_REG2",
+		.supply_name = "vcc7",
+		.of_match = of_match_ptr("LDO_REG2"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ATC2609A_ID_LDO2,
+		.ops = &atc260x_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = 2300000,
+		.uV_step = 100000,
+		.n_voltages = 12,
+		.vsel_reg = ATC2609A_PMU_LDO2_CTL0,
+		.vsel_mask = ATC2609A_LDO_VSEL_MASK0,
+		.enable_reg = ATC2609A_PMU_LDO2_CTL0,
+		.enable_mask = BIT(0),
+		.enable_time = 2000,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "LDO_REG3",
+		.supply_name = "vcc8",
+		.of_match = of_match_ptr("LDO_REG3"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ATC2609A_ID_LDO3,
+		.ops = &atc260x_reg_range0_ops,
+		.type = REGULATOR_VOLTAGE,
+		.linear_ranges = atc260x_ldo_voltage_ranges0,
+		.n_linear_ranges = ARRAY_SIZE(atc260x_ldo_voltage_ranges0),
+		.vsel_reg = ATC2609A_PMU_LDO3_CTL0,
+		.vsel_mask = ATC2609A_LDO_VSEL_MASK1,
+		.vsel_range_reg = ATC2609A_PMU_LDO3_CTL0,
+		.vsel_range_mask = ATC2609A_LDO_VSEL_RANGE_MASK,
+		.linear_range_selectors = atc260x_ldo_voltage_range_sel,
+		.enable_reg = ATC2609A_PMU_LDO3_CTL0,
+		.enable_mask = BIT(0),
+		.enable_time = 2000,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "LDO_REG4",
+		.supply_name = "vcc9",
+		.of_match = of_match_ptr("LDO_REG4"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ATC2609A_ID_LDO4,
+		.ops = &atc260x_reg_range0_ops,
+		.type = REGULATOR_VOLTAGE,
+		.linear_ranges = atc260x_ldo_voltage_ranges0,
+		.n_linear_ranges = ARRAY_SIZE(atc260x_ldo_voltage_ranges0),
+		.vsel_reg = ATC2609A_PMU_LDO4_CTL0,
+		.vsel_mask = ATC2609A_LDO_VSEL_MASK1,
+		.vsel_range_reg = ATC2609A_PMU_LDO4_CTL0,
+		.vsel_range_mask = ATC2609A_LDO_VSEL_RANGE_MASK,
+		.linear_range_selectors = atc260x_ldo_voltage_range_sel,
+		.enable_reg = ATC2609A_PMU_LDO4_CTL0,
+		.enable_mask = BIT(0),
+		.enable_time = 2000,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "LDO_REG5",
+		.supply_name = "vcc10",
+		.of_match = of_match_ptr("LDO_REG5"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ATC2609A_ID_LDO5,
+		.ops = &atc260x_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = 700000,
+		.uV_step = 100000,
+		.n_voltages = 16,
+		.vsel_reg = ATC2609A_PMU_LDO5_CTL0,
+		.vsel_mask = ATC2609A_LDO_VSEL_MASK1,
+		.enable_reg = ATC2609A_PMU_LDO5_CTL0,
+		.enable_mask = BIT(0),
+		.enable_time = 2000,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "LDO_REG6",
+		.supply_name = "vcc11",
+		.of_match = of_match_ptr("LDO_REG6"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ATC2609A_ID_LDO6,
+		.ops = &atc260x_reg_range0_ops,
+		.type = REGULATOR_VOLTAGE,
+		.linear_ranges = atc260x_ldo_voltage_ranges1,
+		.n_linear_ranges = ARRAY_SIZE(atc260x_ldo_voltage_ranges1),
+		.vsel_reg = ATC2609A_PMU_LDO6_CTL0,
+		.vsel_mask = ATC2609A_LDO_VSEL_MASK1,
+		.vsel_range_reg = ATC2609A_PMU_LDO6_CTL0,
+		.vsel_range_mask = ATC2609A_LDO_VSEL_RANGE_MASK,
+		.linear_range_selectors = atc260x_ldo_voltage_range_sel,
+		.enable_reg = ATC2609A_PMU_LDO6_CTL0,
+		.enable_mask = BIT(0),
+		.enable_time = 2000,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "LDO_REG7",
+		.supply_name = "vcc12",
+		.of_match = of_match_ptr("LDO_REG7"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ATC2609A_ID_LDO7,
+		.ops = &atc260x_reg_range0_ops,
+		.type = REGULATOR_VOLTAGE,
+		.linear_ranges = atc260x_ldo_voltage_ranges0,
+		.n_linear_ranges = ARRAY_SIZE(atc260x_ldo_voltage_ranges0),
+		.vsel_reg = ATC2609A_PMU_LDO7_CTL0,
+		.vsel_mask = ATC2609A_LDO_VSEL_MASK1,
+		.vsel_range_reg = ATC2609A_PMU_LDO7_CTL0,
+		.vsel_range_mask = ATC2609A_LDO_VSEL_RANGE_MASK,
+		.linear_range_selectors = atc260x_ldo_voltage_range_sel,
+		.enable_reg = ATC2609A_PMU_LDO7_CTL0,
+		.enable_mask = BIT(0),
+		.enable_time = 2000,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "LDO_REG8",
+		.supply_name = "vcc13",
+		.of_match = of_match_ptr("LDO_REG8"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ATC2609A_ID_LDO8,
+		.ops = &atc260x_reg_range0_ops,
+		.type = REGULATOR_VOLTAGE,
+		.linear_ranges = atc260x_ldo_voltage_ranges0,
+		.n_linear_ranges = ARRAY_SIZE(atc260x_ldo_voltage_ranges0),
+		.vsel_reg = ATC2609A_PMU_LDO8_CTL0,
+		.vsel_mask = ATC2609A_LDO_VSEL_MASK1,
+		.vsel_range_reg = ATC2609A_PMU_LDO8_CTL0,
+		.vsel_range_mask = ATC2609A_LDO_VSEL_RANGE_MASK,
+		.linear_range_selectors = atc260x_ldo_voltage_range_sel,
+		.enable_reg = ATC2609A_PMU_LDO8_CTL0,
+		.enable_mask = BIT(0),
+		.enable_time = 2000,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "LDO_REG9",
+		.supply_name = "vcc14",
+		.of_match = of_match_ptr("LDO_REG9"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ATC2609A_ID_LDO9,
+		.ops = &atc260x_reg_fixed_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = 2600000,
+		.uV_step = 100000,
+		.n_voltages = 8,
+		.vsel_reg = ATC2609A_PMU_LDO9_CTL,
+		.vsel_mask = ATC2609A_LDO_VSEL_MASK2,
+		.enable_time = 2000,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int atc260x_regulator_probe(struct platform_device *pdev)
+{
+	struct atc260x *atc260x = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = atc260x->dev;
+	struct regulator_config config = {};
+	struct regulator_dev *atc260x_rdev;
+	const struct regulator_desc *regulators;
+	int i, nregulators;
+
+	switch (atc260x->type) {
+	case ATC2609A:
+		regulators = atc2609a_reg;
+		nregulators = ATC2609A_ID_MAX;
+		break;
+	default:
+		dev_err(dev, "unsupported ATC260X ID %d\n", atc260x->type);
+		return -EINVAL;
+	}
+
+	config.dev = dev;
+	config.regmap = atc260x->regmap;
+
+	/* Instantiate the regulators */
+	for (i = 0; i < nregulators; i++) {
+		atc260x_rdev = devm_regulator_register(&pdev->dev,
+						       &regulators[i], &config);
+		if (IS_ERR(atc260x_rdev)) {
+			dev_err(dev, "failed to register regulator: %d\n", i);
+			return PTR_ERR(atc260x_rdev);
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver atc260x_regulator_driver = {
+	.probe = atc260x_regulator_probe,
+	.driver = {
+		.name = "atc260x-regulator"
+	},
+};
+
+module_platform_driver(atc260x_regulator_driver);
+
+MODULE_DESCRIPTION("Regulator driver for ATC260x PMICs");
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_LICENSE("GPL");