new file mode 100644
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/firmware/intel-ixp4xx-network-processing-engine.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx Network Processing Engine
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ On the IXP4xx SoCs, the Network Processing Engine (NPE) is a small
+ processor that can load a firmware to perform offloading of networking
+ and crypto tasks. It also manages the MDIO bus to the ethernet PHYs
+ on the IXP4xx platform. All IXP4xx platforms have three NPEs at
+ consecutive memory locations. They are all included in the same
+ device node since they are not independent of each other.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: intel,ixp4xx-network-processing-engine
+
+ reg:
+ minItems: 3
+ maxItems: 3
+ items:
+ - description: NPE0 register range
+ - description: NPE1 register range
+ - description: NPE2 register range
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ npe@c8006000 {
+ compatible = "intel,ixp4xx-network-processing-engine";
+ reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+ };
This adds DT bindings for the Intel IXP4xx Network Processing Engine (NPE). These are three firmware-executing units found in the IXP4xx SoC. These bindings use YAML. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v2->v3: - Rebased on v5.1-rc1 --- ...ntel,ixp4xx-network-processing-engine.yaml | 44 +++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml -- 2.20.1