From patchwork Wed Apr 3 00:19:08 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Joel Stanley X-Patchwork-Id: 161646 Delivered-To: patch@linaro.org Received: by 2002:a02:c6d8:0:0:0:0:0 with SMTP id r24csp2365852jan; Tue, 2 Apr 2019 17:19:39 -0700 (PDT) X-Google-Smtp-Source: APXvYqx1N4RqeuAxiWUc38newXeubVyhdBKA+rhMa8jDc5KcKbjQvEo8jBhIyAYjK/U1GpoERgMz X-Received: by 2002:a63:2c06:: with SMTP id s6mr70195804pgs.245.1554250779770; Tue, 02 Apr 2019 17:19:39 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1554250779; cv=none; d=google.com; s=arc-20160816; b=fsr5SJOPVAEm7TP7e+Cvv7L+U92FWK0cV1AySjQ1LSvrtaIJzO2it68UXInbmRWM4A peIMBb6NAjf7m6wEHI3EFOcXKqUfNzkMRAsxNQ833mM46CJlstOsVZ/jATXehk5fMnMT dCXg21SbUePuk2qdYFUsSvJgvS5Vh1h+wmUPQmZQmOCajqERgwQihPKEH7Ym7VNIVYDT YhI8tu6EOmAhnM9hTVCv0OQkiYldKZw7L8/WiB6AN9bXp6l5376M91QByHoETLsOS0VR uC9a2RI/ON4ZV3obXkIe2gBqEWHwqJUb93gKZiCHkQYdbzZlUUbTEl9jUoKlFsfmPKKJ PFMQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=teMePuH6gHNnGIUs6new31xguljwrA1trQNuoDlJyzg=; b=WZGrFIx1lAh/Ki/p16jvybcwZjEwOSndTU7y0Gn92v6H4DatOyz1W4DDpE9yFbo4C9 TJwtdtCj1RKJu9bcfgxVh2PfQlZP46+IoYPDJMP8FM/VovknL9wffX2repHqAHezZr5i 8YxvaUYynRiYaI6kYxp6uO9FGR48fv04pg4sxaWf/1ea7Wmzt1XpZbO299LTwRXGV7XA Uqh7gD8/Wq1FffVxNHliEc/UyuS/N+VZtDNC8VuznlkUV9cB4d7BW+w/ppQE8LgeVuaj y16zvw2bA+uBf4/f72xqGL3IBNxbX3W5R1Nz1/ODS6aL9rrPBPj1QHN1qg/NxtZH4FAz Qc0Q== ARC-Authentication-Results: i=1; mx.google.com; dkim=fail header.i=@gmail.com header.s=20161025 header.b="bGp7W/03"; spf=pass (google.com: best guess record for domain of devicetree-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=devicetree-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id r63si12737365plb.94.2019.04.02.17.19.39; Tue, 02 Apr 2019 17:19:39 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of devicetree-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=fail header.i=@gmail.com header.s=20161025 header.b="bGp7W/03"; spf=pass (google.com: best guess record for domain of devicetree-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=devicetree-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726071AbfDCATj (ORCPT + 7 others); Tue, 2 Apr 2019 20:19:39 -0400 Received: from mail-pl1-f195.google.com ([209.85.214.195]:45715 "EHLO mail-pl1-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725842AbfDCATi (ORCPT ); Tue, 2 Apr 2019 20:19:38 -0400 Received: by mail-pl1-f195.google.com with SMTP id bf11so7069272plb.12 for ; Tue, 02 Apr 2019 17:19:38 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=sender:from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=teMePuH6gHNnGIUs6new31xguljwrA1trQNuoDlJyzg=; b=bGp7W/03ouNEvNC9WXY2rU3eVd2f+RsKW0V2w5WseNZF9RrTgbEn6l+Bmyg5A6dioO 5SZmwGz//NWsec0+67AERp+obfgzKgt65Odqf9vyAVDSRG+wTayl/VuBXiYP6BseBce3 TYrwcaOUYzdXVnLSwLY4sIXhXi0XDagbTj2+JZ94iI0nVg49IT0hrtEOrPBi06cxlyr7 vZcNkSNhIJBNBXEfGJVHD/KT8ODfZop0TUjn0G8T9AIFHxc0pvMOtdRDIdSftBsKcnLD /GFsUEFwdsJu6KcGyL+h3Xi1JpDmJfpnAs242MmWMDnVMqvewX2NXJzSuWi+kxlPvWyg EaLQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:sender:from:to:cc:subject:date:message-id :in-reply-to:references:mime-version:content-transfer-encoding; bh=teMePuH6gHNnGIUs6new31xguljwrA1trQNuoDlJyzg=; b=LGRSvcsByJRw7HzqItmprUaglCuZb6/HGUVe0CjS1XyKJl8WetDR4rp00vMWQnitX6 k3W7NPPtvVyfjtGVy456EjAxbD5xhYZB3/qCVZtY4ZyoP//ew9/FomdSZzGVNDfEf0fU 7V9NaJvL7WyxxIL3TWVBdGEYXNFhALYRLwobxyVEaJX+8XU8uyr4WQ3h9hhFyeTWk7x0 gYoUzyVu1Y2avQHx9hg3w2vnkRYGUI10/hNSnRo73DgELBwkAQ2w0+ilmApqai5lgObh Tin7pellqF43afWg3ONRCLkbWSNmyvKSnJLn9cv1otUx97HK7DNqpv5/9t71bg1OqmjL QdCw== X-Gm-Message-State: APjAAAVISyFlNKfybKuSnpd5vXuN688uKB1D5QBVdUw4GwS1yFvOB/Xd UkVOqQJSRbvQiJR7zLiDgbM= X-Received: by 2002:a17:902:b60d:: with SMTP id b13mr20722400pls.100.1554250777541; Tue, 02 Apr 2019 17:19:37 -0700 (PDT) Received: from voyager.jms.id.au ([36.255.48.244]) by smtp.gmail.com with ESMTPSA id z6sm26074293pgo.31.2019.04.02.17.19.31 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Tue, 02 Apr 2019 17:19:36 -0700 (PDT) Received: by voyager.jms.id.au (sSMTP sendmail emulation); Wed, 03 Apr 2019 10:49:28 +1030 From: Joel Stanley To: Daniel Vetter , Rob Herring Cc: David Airlie , Andrew Jeffery , Maarten Lankhorst , Sean Paul , linux-aspeed@lists.ozlabs.org, dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, =?utf-8?q?Noralf_Tr=C3=B8nnes?= , Daniel Vetter , Sam Ravnborg Subject: [PATCH v3 2/3] drm: Add ASPEED GFX driver Date: Wed, 3 Apr 2019 10:49:08 +1030 Message-Id: <20190403001909.31637-3-joel@jms.id.au> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20190403001909.31637-1-joel@jms.id.au> References: <20190403001909.31637-1-joel@jms.id.au> MIME-Version: 1.0 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org This driver is for the ASPEED BMC SoC's GFX display hardware. This driver runs on the ARM based BMC systems, unlike the ast driver which runs on a host CPU and is is for a PCI graphics device. Signed-off-by: Joel Stanley Acked-by: Daniel Vetter Reviewed-by: Noralf Trønnes Reviewed-by: Sam Ravnborg --- v3: Really remove drmP.h Remove legacy DRIVER_HAVE_IRQ v2: Use drm_gem_fb_simple_display_pipe_prepare_fb Sort headers Remove drmP.h inclusion Replace gem callbacks with those suggested by Noralf Use drm_connector_cleanup Drop null check for embedddd crtc object Tweaks to spelling in kerneldoc Drop DRM_KMS_FB_HELPER to make fbdev emulation optional Remove ast2400 compatible as the ast2400 support is untested Changes since RFC: drm_fbdev_cma_init -> drm_fb_cma_fbdev_init and use generic lastclose callback Use generic irq handling instead of drm_irq_install Add doc to driver Get rid of unncessary reads in irq enable/disable path Rebase on linux-next --- drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/aspeed/Kconfig | 14 ++ drivers/gpu/drm/aspeed/Makefile | 3 + drivers/gpu/drm/aspeed/aspeed_gfx.h | 104 +++++++++ drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c | 241 ++++++++++++++++++++ drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 269 +++++++++++++++++++++++ drivers/gpu/drm/aspeed/aspeed_gfx_out.c | 42 ++++ 8 files changed, 676 insertions(+) create mode 100644 drivers/gpu/drm/aspeed/Kconfig create mode 100644 drivers/gpu/drm/aspeed/Makefile create mode 100644 drivers/gpu/drm/aspeed/aspeed_gfx.h create mode 100644 drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c create mode 100644 drivers/gpu/drm/aspeed/aspeed_gfx_drv.c create mode 100644 drivers/gpu/drm/aspeed/aspeed_gfx_out.c -- 2.20.1 diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 82bb221ec94e..b1ec8f85c2a8 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -335,6 +335,8 @@ source "drivers/gpu/drm/xen/Kconfig" source "drivers/gpu/drm/vboxvideo/Kconfig" +source "drivers/gpu/drm/aspeed/Kconfig" + # Keep legacy drivers last menuconfig DRM_LEGACY diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 0baf148e3687..df8835045310 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -110,3 +110,4 @@ obj-$(CONFIG_DRM_PL111) += pl111/ obj-$(CONFIG_DRM_TVE200) += tve200/ obj-$(CONFIG_DRM_XEN) += xen/ obj-$(CONFIG_DRM_VBOXVIDEO) += vboxvideo/ +obj-$(CONFIG_DRM_ASPEED_GFX) += aspeed/ diff --git a/drivers/gpu/drm/aspeed/Kconfig b/drivers/gpu/drm/aspeed/Kconfig new file mode 100644 index 000000000000..42b74d18a41b --- /dev/null +++ b/drivers/gpu/drm/aspeed/Kconfig @@ -0,0 +1,14 @@ +config DRM_ASPEED_GFX + tristate "ASPEED BMC Display Controller" + depends on DRM && OF + select DRM_KMS_HELPER + select DRM_KMS_CMA_HELPER + select DRM_PANEL + select DMA_CMA + select CMA + select MFD_SYSCON + help + Chose this option if you have an ASPEED AST2500 SOC Display + Controller (aka GFX). + + If M is selected this module will be called aspeed_gfx. diff --git a/drivers/gpu/drm/aspeed/Makefile b/drivers/gpu/drm/aspeed/Makefile new file mode 100644 index 000000000000..6e194cd790d8 --- /dev/null +++ b/drivers/gpu/drm/aspeed/Makefile @@ -0,0 +1,3 @@ +aspeed_gfx-y := aspeed_gfx_drv.o aspeed_gfx_crtc.o aspeed_gfx_out.o + +obj-$(CONFIG_DRM_ASPEED_GFX) += aspeed_gfx.o diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h new file mode 100644 index 000000000000..b7a986e49177 --- /dev/null +++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2018 IBM Corporation + +#include +#include + +struct aspeed_gfx { + void __iomem *base; + struct clk *clk; + struct reset_control *rst; + struct regmap *scu; + + struct drm_simple_display_pipe pipe; + struct drm_connector connector; + struct drm_fbdev_cma *fbdev; +}; + +int aspeed_gfx_create_pipe(struct drm_device *drm); +int aspeed_gfx_create_output(struct drm_device *drm); + +#define CRT_CTRL1 0x60 /* CRT Control I */ +#define CRT_CTRL2 0x64 /* CRT Control II */ +#define CRT_STATUS 0x68 /* CRT Status */ +#define CRT_MISC 0x6c /* CRT Misc Setting */ +#define CRT_HORIZ0 0x70 /* CRT Horizontal Total & Display Enable End */ +#define CRT_HORIZ1 0x74 /* CRT Horizontal Retrace Start & End */ +#define CRT_VERT0 0x78 /* CRT Vertical Total & Display Enable End */ +#define CRT_VERT1 0x7C /* CRT Vertical Retrace Start & End */ +#define CRT_ADDR 0x80 /* CRT Display Starting Address */ +#define CRT_OFFSET 0x84 /* CRT Display Offset & Terminal Count */ +#define CRT_THROD 0x88 /* CRT Threshold */ +#define CRT_XSCALE 0x8C /* CRT Scaling-Up Factor */ +#define CRT_CURSOR0 0x90 /* CRT Hardware Cursor X & Y Offset */ +#define CRT_CURSOR1 0x94 /* CRT Hardware Cursor X & Y Position */ +#define CRT_CURSOR2 0x98 /* CRT Hardware Cursor Pattern Address */ +#define CRT_9C 0x9C +#define CRT_OSD_H 0xA0 /* CRT OSD Horizontal Start/End */ +#define CRT_OSD_V 0xA4 /* CRT OSD Vertical Start/End */ +#define CRT_OSD_ADDR 0xA8 /* CRT OSD Pattern Address */ +#define CRT_OSD_DISP 0xAC /* CRT OSD Offset */ +#define CRT_OSD_THRESH 0xB0 /* CRT OSD Threshold & Alpha */ +#define CRT_B4 0xB4 +#define CRT_STS_V 0xB8 /* CRT Status V */ +#define CRT_SCRATCH 0xBC /* Scratchpad */ +#define CRT_BB0_ADDR 0xD0 /* CRT Display BB0 Starting Address */ +#define CRT_BB1_ADDR 0xD4 /* CRT Display BB1 Starting Address */ +#define CRT_BB_COUNT 0xD8 /* CRT Display BB Terminal Count */ +#define OSD_COLOR1 0xE0 /* OSD Color Palette Index 1 & 0 */ +#define OSD_COLOR2 0xE4 /* OSD Color Palette Index 3 & 2 */ +#define OSD_COLOR3 0xE8 /* OSD Color Palette Index 5 & 4 */ +#define OSD_COLOR4 0xEC /* OSD Color Palette Index 7 & 6 */ +#define OSD_COLOR5 0xF0 /* OSD Color Palette Index 9 & 8 */ +#define OSD_COLOR6 0xF4 /* OSD Color Palette Index 11 & 10 */ +#define OSD_COLOR7 0xF8 /* OSD Color Palette Index 13 & 12 */ +#define OSD_COLOR8 0xFC /* OSD Color Palette Index 15 & 14 */ + +/* CTRL1 */ +#define CRT_CTRL_EN BIT(0) +#define CRT_CTRL_HW_CURSOR_EN BIT(1) +#define CRT_CTRL_OSD_EN BIT(2) +#define CRT_CTRL_INTERLACED BIT(3) +#define CRT_CTRL_COLOR_RGB565 (0 << 7) +#define CRT_CTRL_COLOR_YUV444 (1 << 7) +#define CRT_CTRL_COLOR_XRGB8888 (2 << 7) +#define CRT_CTRL_COLOR_RGB888 (3 << 7) +#define CRT_CTRL_COLOR_YUV444_2RGB (5 << 7) +#define CRT_CTRL_COLOR_YUV422 (7 << 7) +#define CRT_CTRL_COLOR_MASK GENMASK(9, 7) +#define CRT_CTRL_HSYNC_NEGATIVE BIT(16) +#define CRT_CTRL_VSYNC_NEGATIVE BIT(17) +#define CRT_CTRL_VERTICAL_INTR_EN BIT(30) +#define CRT_CTRL_VERTICAL_INTR_STS BIT(31) + +/* CTRL2 */ +#define CRT_CTRL_DAC_EN BIT(0) +#define CRT_CTRL_VBLANK_LINE(x) (((x) << 20) & CRT_CTRL_VBLANK_LINE_MASK) +#define CRT_CTRL_VBLANK_LINE_MASK GENMASK(20, 31) + +/* CRT_HORIZ0 */ +#define CRT_H_TOTAL(x) (x) +#define CRT_H_DE(x) ((x) << 16) + +/* CRT_HORIZ1 */ +#define CRT_H_RS_START(x) (x) +#define CRT_H_RS_END(x) ((x) << 16) + +/* CRT_VIRT0 */ +#define CRT_V_TOTAL(x) (x) +#define CRT_V_DE(x) ((x) << 16) + +/* CRT_VIRT1 */ +#define CRT_V_RS_START(x) (x) +#define CRT_V_RS_END(x) ((x) << 16) + +/* CRT_OFFSET */ +#define CRT_DISP_OFFSET(x) (x) +#define CRT_TERM_COUNT(x) ((x) << 16) + +/* CRT_THROD */ +#define CRT_THROD_LOW(x) (x) +#define CRT_THROD_HIGH(x) ((x) << 8) + +/* Default Threshold Seting */ +#define G5_CRT_THROD_VAL (CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3C)) diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c new file mode 100644 index 000000000000..15db9e426ec4 --- /dev/null +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2018 IBM Corporation + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "aspeed_gfx.h" + +static struct aspeed_gfx * +drm_pipe_to_aspeed_gfx(struct drm_simple_display_pipe *pipe) +{ + return container_of(pipe, struct aspeed_gfx, pipe); +} + +static int aspeed_gfx_set_pixel_fmt(struct aspeed_gfx *priv, u32 *bpp) +{ + struct drm_crtc *crtc = &priv->pipe.crtc; + struct drm_device *drm = crtc->dev; + const u32 format = crtc->primary->state->fb->format->format; + u32 ctrl1; + + ctrl1 = readl(priv->base + CRT_CTRL1); + ctrl1 &= ~CRT_CTRL_COLOR_MASK; + + switch (format) { + case DRM_FORMAT_RGB565: + dev_dbg(drm->dev, "Setting up RGB565 mode\n"); + ctrl1 |= CRT_CTRL_COLOR_RGB565; + *bpp = 16; + break; + case DRM_FORMAT_XRGB8888: + dev_dbg(drm->dev, "Setting up XRGB8888 mode\n"); + ctrl1 |= CRT_CTRL_COLOR_XRGB8888; + *bpp = 32; + break; + default: + dev_err(drm->dev, "Unhandled pixel format %08x\n", format); + return -EINVAL; + } + + writel(ctrl1, priv->base + CRT_CTRL1); + + return 0; +} + +static void aspeed_gfx_enable_controller(struct aspeed_gfx *priv) +{ + u32 ctrl1 = readl(priv->base + CRT_CTRL1); + u32 ctrl2 = readl(priv->base + CRT_CTRL2); + + /* SCU2C: set DAC source for display output to Graphics CRT (GFX) */ + regmap_update_bits(priv->scu, 0x2c, BIT(16), BIT(16)); + + writel(ctrl1 | CRT_CTRL_EN, priv->base + CRT_CTRL1); + writel(ctrl2 | CRT_CTRL_DAC_EN, priv->base + CRT_CTRL2); +} + +static void aspeed_gfx_disable_controller(struct aspeed_gfx *priv) +{ + u32 ctrl1 = readl(priv->base + CRT_CTRL1); + u32 ctrl2 = readl(priv->base + CRT_CTRL2); + + writel(ctrl1 & ~CRT_CTRL_EN, priv->base + CRT_CTRL1); + writel(ctrl2 & ~CRT_CTRL_DAC_EN, priv->base + CRT_CTRL2); + + regmap_update_bits(priv->scu, 0x2c, BIT(16), 0); +} + +static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv) +{ + struct drm_display_mode *m = &priv->pipe.crtc.state->adjusted_mode; + u32 ctrl1, d_offset, t_count, bpp; + int err; + + err = aspeed_gfx_set_pixel_fmt(priv, &bpp); + if (err) + return; + +#if 0 + /* TODO: we have only been able to test with the 40MHz USB clock. The + * clock is fixed, so we cannot adjust it here. */ + clk_set_rate(priv->pixel_clk, m->crtc_clock * 1000); +#endif + + ctrl1 = readl(priv->base + CRT_CTRL1); + ctrl1 &= ~(CRT_CTRL_INTERLACED | + CRT_CTRL_HSYNC_NEGATIVE | + CRT_CTRL_VSYNC_NEGATIVE); + + if (m->flags & DRM_MODE_FLAG_INTERLACE) + ctrl1 |= CRT_CTRL_INTERLACED; + + if (!(m->flags & DRM_MODE_FLAG_PHSYNC)) + ctrl1 |= CRT_CTRL_HSYNC_NEGATIVE; + + if (!(m->flags & DRM_MODE_FLAG_PVSYNC)) + ctrl1 |= CRT_CTRL_VSYNC_NEGATIVE; + + writel(ctrl1, priv->base + CRT_CTRL1); + + /* Horizontal timing */ + writel(CRT_H_TOTAL(m->htotal - 1) | CRT_H_DE(m->hdisplay - 1), + priv->base + CRT_HORIZ0); + writel(CRT_H_RS_START(m->hsync_start - 1) | CRT_H_RS_END(m->hsync_end), + priv->base + CRT_HORIZ1); + + + /* Vertical timing */ + writel(CRT_V_TOTAL(m->vtotal - 1) | CRT_V_DE(m->vdisplay - 1), + priv->base + CRT_VERT0); + writel(CRT_V_RS_START(m->vsync_start) | CRT_V_RS_END(m->vsync_end), + priv->base + CRT_VERT1); + + /* + * Display Offset: address difference between consecutive scan lines + * Terminal Count: memory size of one scan line + */ + d_offset = m->hdisplay * bpp / 8; + t_count = (m->hdisplay * bpp + 127) / 128; + writel(CRT_DISP_OFFSET(d_offset) | CRT_TERM_COUNT(t_count), + priv->base + CRT_OFFSET); + + /* + * Threshold: FIFO thresholds of refill and stop (16 byte chunks + * per line, rounded up) + */ + writel(G5_CRT_THROD_VAL, priv->base + CRT_THROD); +} + +static void aspeed_gfx_pipe_enable(struct drm_simple_display_pipe *pipe, + struct drm_crtc_state *crtc_state, + struct drm_plane_state *plane_state) +{ + struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe); + struct drm_crtc *crtc = &pipe->crtc; + + aspeed_gfx_crtc_mode_set_nofb(priv); + aspeed_gfx_enable_controller(priv); + drm_crtc_vblank_on(crtc); +} + +static void aspeed_gfx_pipe_disable(struct drm_simple_display_pipe *pipe) +{ + struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe); + struct drm_crtc *crtc = &pipe->crtc; + + drm_crtc_vblank_off(crtc); + aspeed_gfx_disable_controller(priv); +} + +static void aspeed_gfx_pipe_update(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *plane_state) +{ + struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe); + struct drm_crtc *crtc = &pipe->crtc; + struct drm_framebuffer *fb = pipe->plane.state->fb; + struct drm_pending_vblank_event *event; + struct drm_gem_cma_object *gem; + + spin_lock_irq(&crtc->dev->event_lock); + event = crtc->state->event; + if (event) { + crtc->state->event = NULL; + + if (drm_crtc_vblank_get(crtc) == 0) + drm_crtc_arm_vblank_event(crtc, event); + else + drm_crtc_send_vblank_event(crtc, event); + } + spin_unlock_irq(&crtc->dev->event_lock); + + if (!fb) + return; + + gem = drm_fb_cma_get_gem_obj(fb, 0); + if (!gem) + return; + writel(gem->paddr, priv->base + CRT_ADDR); +} + +static int aspeed_gfx_enable_vblank(struct drm_simple_display_pipe *pipe) +{ + struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe); + u32 reg = readl(priv->base + CRT_CTRL1); + + /* Clear pending VBLANK IRQ */ + writel(reg | CRT_CTRL_VERTICAL_INTR_STS, priv->base + CRT_CTRL1); + + reg |= CRT_CTRL_VERTICAL_INTR_EN; + writel(reg, priv->base + CRT_CTRL1); + + return 0; +} + +static void aspeed_gfx_disable_vblank(struct drm_simple_display_pipe *pipe) +{ + struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe); + u32 reg = readl(priv->base + CRT_CTRL1); + + reg &= ~CRT_CTRL_VERTICAL_INTR_EN; + writel(reg, priv->base + CRT_CTRL1); + + /* Clear pending VBLANK IRQ */ + writel(reg | CRT_CTRL_VERTICAL_INTR_STS, priv->base + CRT_CTRL1); +} + +static struct drm_simple_display_pipe_funcs aspeed_gfx_funcs = { + .enable = aspeed_gfx_pipe_enable, + .disable = aspeed_gfx_pipe_disable, + .update = aspeed_gfx_pipe_update, + .prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb, + .enable_vblank = aspeed_gfx_enable_vblank, + .disable_vblank = aspeed_gfx_disable_vblank, +}; + +static const uint32_t aspeed_gfx_formats[] = { + DRM_FORMAT_XRGB8888, + DRM_FORMAT_RGB565, +}; + +int aspeed_gfx_create_pipe(struct drm_device *drm) +{ + struct aspeed_gfx *priv = drm->dev_private; + + return drm_simple_display_pipe_init(drm, &priv->pipe, &aspeed_gfx_funcs, + aspeed_gfx_formats, + ARRAY_SIZE(aspeed_gfx_formats), + NULL, + &priv->connector); +} diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c new file mode 100644 index 000000000000..eeb22eccd1fc --- /dev/null +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c @@ -0,0 +1,269 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2018 IBM Corporation + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "aspeed_gfx.h" + +/** + * DOC: ASPEED GFX Driver + * + * This driver is for the ASPEED BMC SoC's 'GFX' display hardware, also called + * the 'SOC Display Controller' in the datasheet. This driver runs on the ARM + * based BMC systems, unlike the ast driver which runs on a host CPU and is for + * a PCIe graphics device. + * + * The AST2500 supports a total of 3 output paths: + * + * 1. VGA output, the output target can choose either or both to the DAC + * or DVO interface. + * + * 2. Graphics CRT output, the output target can choose either or both to + * the DAC or DVO interface. + * + * 3. Video input from DVO, the video input can be used for video engine + * capture or DAC display output. + * + * Output options are selected in SCU2C. + * + * The "VGA mode" device is the PCI attached controller. The "Graphics CRT" + * is the ARM's internal display controller. + * + * The driver only supports a simple configuration consisting of a 40MHz + * pixel clock, fixed by hardware limitations, and the VGA output path. + * + * The driver was written with the 'AST2500 Software Programming Guide' v17, + * which is available under NDA from ASPEED. + */ + +static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = { + .fb_create = drm_gem_fb_create, + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, +}; + +static void aspeed_gfx_setup_mode_config(struct drm_device *drm) +{ + drm_mode_config_init(drm); + + drm->mode_config.min_width = 0; + drm->mode_config.min_height = 0; + drm->mode_config.max_width = 800; + drm->mode_config.max_height = 600; + drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs; +} + +static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data) +{ + struct drm_device *drm = data; + struct aspeed_gfx *priv = drm->dev_private; + u32 reg; + + reg = readl(priv->base + CRT_CTRL1); + + if (reg & CRT_CTRL_VERTICAL_INTR_STS) { + drm_crtc_handle_vblank(&priv->pipe.crtc); + writel(reg, priv->base + CRT_CTRL1); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + + + +static int aspeed_gfx_load(struct drm_device *drm) +{ + struct platform_device *pdev = to_platform_device(drm->dev); + struct aspeed_gfx *priv; + struct resource *res; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + drm->dev_private = priv; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(drm->dev, res); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + priv->scu = syscon_regmap_lookup_by_compatible("aspeed,ast2500-scu"); + if (IS_ERR(priv->scu)) { + dev_err(&pdev->dev, "failed to find SCU regmap\n"); + return PTR_ERR(priv->scu); + } + + ret = of_reserved_mem_device_init(drm->dev); + if (ret) { + dev_err(&pdev->dev, + "failed to initialize reserved mem: %d\n", ret); + return ret; + } + + ret = dma_set_mask_and_coherent(drm->dev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(&pdev->dev, "failed to set DMA mask: %d\n", ret); + return ret; + } + + priv->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (IS_ERR(priv->rst)) { + dev_err(&pdev->dev, + "missing or invalid reset controller device tree entry"); + return PTR_ERR(priv->rst); + } + reset_control_deassert(priv->rst); + + priv->clk = devm_clk_get(drm->dev, NULL); + if (IS_ERR(priv->clk)) { + dev_err(&pdev->dev, + "missing or invalid clk device tree entry"); + return PTR_ERR(priv->clk); + } + clk_prepare_enable(priv->clk); + + /* Sanitize control registers */ + writel(0, priv->base + CRT_CTRL1); + writel(0, priv->base + CRT_CTRL2); + + aspeed_gfx_setup_mode_config(drm); + + ret = drm_vblank_init(drm, 1); + if (ret < 0) { + dev_err(drm->dev, "Failed to initialise vblank\n"); + return ret; + } + + ret = aspeed_gfx_create_output(drm); + if (ret < 0) { + dev_err(drm->dev, "Failed to create outputs\n"); + return ret; + } + + ret = aspeed_gfx_create_pipe(drm); + if (ret < 0) { + dev_err(drm->dev, "Cannot setup simple display pipe\n"); + return ret; + } + + ret = devm_request_irq(drm->dev, platform_get_irq(pdev, 0), + aspeed_gfx_irq_handler, 0, "aspeed gfx", drm); + if (ret < 0) { + dev_err(drm->dev, "Failed to install IRQ handler\n"); + return ret; + } + + drm_mode_config_reset(drm); + + drm_fbdev_generic_setup(drm, 32); + + return 0; +} + +static void aspeed_gfx_unload(struct drm_device *drm) +{ + drm_kms_helper_poll_fini(drm); + drm_mode_config_cleanup(drm); + + drm->dev_private = NULL; +} + +DEFINE_DRM_GEM_CMA_FOPS(fops); + +static struct drm_driver aspeed_gfx_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | + DRIVER_PRIME | DRIVER_ATOMIC, + .gem_create_object = drm_cma_gem_create_object_default_funcs, + .dumb_create = drm_gem_cma_dumb_create, + .prime_handle_to_fd = drm_gem_prime_handle_to_fd, + .prime_fd_to_handle = drm_gem_prime_fd_to_handle, + .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table, + .gem_prime_mmap = drm_gem_prime_mmap, + .fops = &fops, + .name = "aspeed-gfx-drm", + .desc = "ASPEED GFX DRM", + .date = "20180319", + .major = 1, + .minor = 0, +}; + +static const struct of_device_id aspeed_gfx_match[] = { + { .compatible = "aspeed,ast2500-gfx" }, + { } +}; + +static int aspeed_gfx_probe(struct platform_device *pdev) +{ + struct drm_device *drm; + int ret; + + drm = drm_dev_alloc(&aspeed_gfx_driver, &pdev->dev); + if (IS_ERR(drm)) + return PTR_ERR(drm); + + ret = aspeed_gfx_load(drm); + if (ret) + goto err_free; + + ret = drm_dev_register(drm, 0); + if (ret) + goto err_unload; + + return 0; + +err_unload: + aspeed_gfx_unload(drm); +err_free: + drm_dev_put(drm); + + return ret; +} + +static int aspeed_gfx_remove(struct platform_device *pdev) +{ + struct drm_device *drm = platform_get_drvdata(pdev); + + drm_dev_unregister(drm); + aspeed_gfx_unload(drm); + drm_dev_put(drm); + + return 0; +} + +static struct platform_driver aspeed_gfx_platform_driver = { + .probe = aspeed_gfx_probe, + .remove = aspeed_gfx_remove, + .driver = { + .name = "aspeed_gfx", + .of_match_table = aspeed_gfx_match, + }, +}; + +module_platform_driver(aspeed_gfx_platform_driver); + +MODULE_AUTHOR("Joel Stanley "); +MODULE_DESCRIPTION("ASPEED BMC DRM/KMS driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_out.c b/drivers/gpu/drm/aspeed/aspeed_gfx_out.c new file mode 100644 index 000000000000..67ee5fa10055 --- /dev/null +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_out.c @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2018 IBM Corporation + +#include +#include +#include +#include + +#include "aspeed_gfx.h" + +static int aspeed_gfx_get_modes(struct drm_connector *connector) +{ + return drm_add_modes_noedid(connector, 800, 600); +} + +static const struct +drm_connector_helper_funcs aspeed_gfx_connector_helper_funcs = { + .get_modes = aspeed_gfx_get_modes, +}; + +static const struct drm_connector_funcs aspeed_gfx_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +int aspeed_gfx_create_output(struct drm_device *drm) +{ + struct aspeed_gfx *priv = drm->dev_private; + int ret; + + priv->connector.dpms = DRM_MODE_DPMS_OFF; + priv->connector.polled = 0; + drm_connector_helper_add(&priv->connector, + &aspeed_gfx_connector_helper_funcs); + ret = drm_connector_init(drm, &priv->connector, + &aspeed_gfx_connector_funcs, + DRM_MODE_CONNECTOR_Unknown); + return ret; +}