@@ -1,6 +1,13 @@
#
# Phy drivers for Allwinner platforms
#
+config PHY_SUN4I_SATA
+ tristate "Allwinner sunxi SoC SATA PHY driver"
+ depends on ARCH_SUNXI && HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the SATA PHY present on A10/A20/R40.
+
config PHY_SUN4I_USB
tristate "Allwinner sunxi SoC USB PHY driver"
depends on ARCH_SUNXI && HAS_IOMEM && OF
@@ -1,2 +1,3 @@
+obj-$(CONFIG_PHY_SUN4I_SATA) += phy-sun4i-sata.o
obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
new file mode 100644
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Allwinner sun4i SATA phy driver
+ * Copyright (C) 2018 Corentin Labbe <clabbe.montjoie@gmail.com>
+ *
+ * PHY init code taken from drivers/ahci/ahci_sunxi.c
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define AHCI_PHYCS0R 0x0000
+#define AHCI_PHYCS1R 0x0004
+#define AHCI_PHYCS2R 0x0008
+#define AHCI_TIMER1MS 0x0020
+#define AHCI_GPARAM1R 0x0028
+#define AHCI_GPARAM2R 0x002c
+#define AHCI_PPARAMR 0x0030
+#define AHCI_TESTR 0x0034
+#define AHCI_VERSIONR 0x0038
+#define AHCI_IDR 0x003c
+#define AHCI_RWCR 0x003c
+#define AHCI_P0DMACR 0x00b0
+#define AHCI_P0PHYCR 0x00b8
+#define AHCI_P0PHYSR 0x00bc
+
+struct sun4i_sata_phy_data {
+ struct phy *phy;
+ struct device *dev;
+ void __iomem *base;
+};
+
+static void sunxi_clrbits(void __iomem *reg, u32 clr_val)
+{
+ u32 reg_val;
+
+ reg_val = readl(reg);
+ reg_val &= ~(clr_val);
+ writel(reg_val, reg);
+}
+
+static void sunxi_setbits(void __iomem *reg, u32 set_val)
+{
+ u32 reg_val;
+
+ reg_val = readl(reg);
+ reg_val |= set_val;
+ writel(reg_val, reg);
+}
+
+static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val)
+{
+ u32 reg_val;
+
+ reg_val = readl(reg);
+ reg_val &= ~(clr_val);
+ reg_val |= set_val;
+ writel(reg_val, reg);
+}
+
+static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift)
+{
+ return (readl(reg) >> shift) & mask;
+}
+
+static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
+{
+ u32 reg_val;
+ int timeout;
+
+ /* This magic is from the original code */
+ writel(0, reg_base + AHCI_RWCR);
+ msleep(5);
+
+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R, (0x7 << 24),
+ (0x5 << 24) | BIT(23) | BIT(18));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS1R,
+ (0x3 << 16) | (0x1f << 8) | (0x3 << 6),
+ (0x2 << 16) | (0x6 << 8) | (0x2 << 6));
+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15));
+ sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R, (0x7 << 20), (0x3 << 20));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS2R, (0x1f << 5), (0x19 << 5));
+ msleep(5);
+
+ sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
+
+ timeout = 250; /* Power up takes aprox 50 us */
+ do {
+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28);
+ if (reg_val == 0x02)
+ break;
+
+ if (--timeout == 0) {
+ dev_err(dev, "PHY power up failed.\n");
+ return -EIO;
+ }
+ udelay(1);
+ } while (1);
+
+ sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24));
+
+ timeout = 100; /* Calibration takes aprox 10 us */
+ do {
+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24);
+ if (reg_val == 0x00)
+ break;
+
+ if (--timeout == 0) {
+ dev_err(dev, "PHY calibration failed.\n");
+ return -EIO;
+ }
+ udelay(1);
+ } while (1);
+
+ msleep(15);
+
+ writel(0x7, reg_base + AHCI_RWCR);
+
+ return 0;
+}
+
+static int sun4i_sata_phy_power_on(struct phy *_phy)
+{
+ struct sun4i_sata_phy_data *data = phy_get_drvdata(_phy);
+
+ dev_info(data->dev, "%s\n", __func__);
+ return ahci_sunxi_phy_init(data->dev, data->base);
+}
+
+static const struct phy_ops sun4i_sata_phy_ops = {
+ .power_on = sun4i_sata_phy_power_on,
+ .owner = THIS_MODULE,
+};
+
+static int sun4i_sata_phy_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int sun4i_sata_phy_probe(struct platform_device *pdev)
+{
+ struct sun4i_sata_phy_data *data;
+ struct device *dev = &pdev->dev;
+ struct phy_provider *phy_provider;
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, data);
+ data->dev = dev;
+
+ data->base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!data->base)
+ return -ENOMEM;
+
+ data->phy = devm_phy_create(dev, NULL, &sun4i_sata_phy_ops);
+ if (IS_ERR(data->phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(data->phy);
+ }
+ phy_set_drvdata(data->phy, data);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ dev_info(dev, "successfully loaded\n");
+
+ return 0;
+}
+
+static const struct of_device_id sun4i_sata_phy_of_match[] = {
+ { .compatible = "allwinner,sun4i-a10-sata-phy", },
+ { .compatible = "allwinner,sun8i-r40-sata-phy", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sun4i_sata_phy_of_match);
+
+static struct platform_driver sun4i_sata_phy_driver = {
+ .probe = sun4i_sata_phy_probe,
+ .remove = sun4i_sata_phy_remove,
+ .driver = {
+ .of_match_table = sun4i_sata_phy_of_match,
+ .name = "sun4i-a10-sata-phy",
+ }
+};
+module_platform_driver(sun4i_sata_phy_driver);
+
+MODULE_DESCRIPTION("sun4i SATA PHY driver");
+MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>");
+MODULE_LICENSE("GPL v2");
This patch create a PHY SATA driver for allwinner SoC A10/A20/R40. The code is taken from drivers/ata/ahci_sunxi.c but cannot be removed from it yet, since we need to finish the transition to new binding with the PHY usage. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> --- drivers/phy/allwinner/Kconfig | 7 ++ drivers/phy/allwinner/Makefile | 1 + drivers/phy/allwinner/phy-sun4i-sata.c | 208 +++++++++++++++++++++++++++++++++ 3 files changed, 216 insertions(+) create mode 100644 drivers/phy/allwinner/phy-sun4i-sata.c -- 2.16.4