diff mbox series

[v5,14/14] mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode

Message ID 20180427114723.2687-15-kishon@ti.com
State Accepted
Commit 3f4028780287ff5a7308f40e10bbba9a42b993aa
Headers show
Series mmc: sdhci-omap: Add UHS/HS200 mode support | expand

Commit Message

Kishon Vijay Abraham I April 27, 2018, 11:47 a.m. UTC 
commit 8d20b2eae6c47b095523 ("mmc: sdhci_omap: Add support to set
IODELAY values") stored IODelay values for all MM/SD modes
in pinctrl_state structure member of sdhci_omap_host. However for
DDR mode it gets IODelay values only for 1.8v DDR mode. Since some of
the platforms which uses sdhci-omap has IO lines connected to 3.3v,
get IODelay values for 3.3v DDR mode.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

---
 drivers/mmc/host/sdhci-omap.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

-- 
2.17.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index bd5e03d177e0..f3a7c8ece4be 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -842,8 +842,15 @@  static int sdhci_omap_config_iodelay_pinctrl_state(struct sdhci_omap_host
 
 	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "ddr_1_8v", caps,
 						 MMC_CAP_1_8V_DDR);
-	if (!IS_ERR(state))
+	if (!IS_ERR(state)) {
 		pinctrl_state[MMC_TIMING_MMC_DDR52] = state;
+	} else {
+		state = sdhci_omap_iodelay_pinctrl_state(omap_host, "ddr_3_3v",
+							 caps,
+							 MMC_CAP_3_3V_DDR);
+		if (!IS_ERR(state))
+			pinctrl_state[MMC_TIMING_MMC_DDR52] = state;
+	}
 
 	state = sdhci_omap_iodelay_pinctrl_state(omap_host, "hs", caps,
 						 MMC_CAP_SD_HIGHSPEED);