[1/8] dt-bindings: remoteproc: qcom: adsp: Make ADSP pil loader as generic

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,lpass-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,lpass-adsp-pil.yaml
new file mode 100644
index 0000000..9f11332
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,lpass-adsp-pil.yaml
@@ -0,0 +1,160 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,lpass-adsp-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS ADSP Peripheral Image Loader
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This document defines the binding for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. ADSP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdm845-adsp-pil
+
+  reg:
+    maxItems: 1
+    description:
+      The base address and size of the qdsp6ss register
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+
+  clocks:
+    items:
+      - description: XO clock
+      - description: SWAY clock
+      - description: LPASS AHBS AON clock
+      - description: LPASS AHBM AON clock
+      - description: QDSP XO clock
+      - description: Q6SP6SS SLEEP clock
+      - description: Q6SP6SS CORE clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sway_cbcr
+      - const: lpass_ahbs_aon_cbcr
+      - const: lpass_ahbm_aon_cbcr
+      - const: qdsp6ss_xo
+      - const: qdsp6ss_sleep
+      - const: qdsp6ss_core
+
+  power-domains:
+    items:
+      - description: CX power domain
+
+  resets:
+    items:
+      - description: PDC AUDIO SYNC RESET
+      - description: CC LPASS restart
+
+  reset-names:
+    items:
+      - const: pdc_sync
+      - const: cc_lpass
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Phandle reference to a syscon representing TCSR followed by the
+      three offsets within syscon for q6, modem and nc halt registers.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The names of the state bits used for SMP2P output
+    items:
+      - const: stop
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - memory-region
+  - qcom,smem-states
+  - qcom,smem-state-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,lpass-sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    remoteproc@17300000 {
+        compatible = "qcom,sdm845-adsp-pil";
+        reg = <0x17300000 0x40c>;
+
+        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                "handover", "stop-ack";
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>,
+                 <&gcc GCC_LPASS_SWAY_CLK>,
+                 <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
+                 <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
+                 <&lpasscc LPASS_QDSP6SS_XO_CLK>,
+                 <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
+                 <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
+        clock-names = "xo", "sway_cbcr",
+                "lpass_ahbs_aon_cbcr",
+                "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
+                "qdsp6ss_sleep", "qdsp6ss_core";
+
+        power-domains = <&rpmhpd SDM845_CX>;
+
+        resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
+                 <&aoss_reset AOSS_CC_LPASS_RESTART>;
+        reset-names = "pdc_sync", "cc_lpass";
+
+        qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
+
+        memory-region = <&pil_adsp_mem>;
+
+        qcom,smem-states = <&adsp_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
deleted file mode 100644
index 1535bbb..0000000
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
+++ /dev/null
@@ -1,160 +0,0 @@ 
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/remoteproc/qcom,sdm845-adsp-pil.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm SDM845 ADSP Peripheral Image Loader
-
-maintainers:
-  - Bjorn Andersson <bjorn.andersson@linaro.org>
-
-description:
-  This document defines the binding for a component that loads and boots firmware
-  on the Qualcomm Technology Inc. ADSP.
-
-properties:
-  compatible:
-    enum:
-      - qcom,sdm845-adsp-pil
-
-  reg:
-    maxItems: 1
-    description:
-      The base address and size of the qdsp6ss register
-
-  interrupts:
-    items:
-      - description: Watchdog interrupt
-      - description: Fatal interrupt
-      - description: Ready interrupt
-      - description: Handover interrupt
-      - description: Stop acknowledge interrupt
-
-  interrupt-names:
-    items:
-      - const: wdog
-      - const: fatal
-      - const: ready
-      - const: handover
-      - const: stop-ack
-
-  clocks:
-    items:
-      - description: XO clock
-      - description: SWAY clock
-      - description: LPASS AHBS AON clock
-      - description: LPASS AHBM AON clock
-      - description: QDSP XO clock
-      - description: Q6SP6SS SLEEP clock
-      - description: Q6SP6SS CORE clock
-
-  clock-names:
-    items:
-      - const: xo
-      - const: sway_cbcr
-      - const: lpass_ahbs_aon_cbcr
-      - const: lpass_ahbm_aon_cbcr
-      - const: qdsp6ss_xo
-      - const: qdsp6ss_sleep
-      - const: qdsp6ss_core
-
-  power-domains:
-    items:
-      - description: CX power domain
-
-  resets:
-    items:
-      - description: PDC AUDIO SYNC RESET
-      - description: CC LPASS restart
-
-  reset-names:
-    items:
-      - const: pdc_sync
-      - const: cc_lpass
-
-  memory-region:
-    maxItems: 1
-    description: Reference to the reserved-memory for the Hexagon core
-
-  qcom,halt-regs:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description:
-      Phandle reference to a syscon representing TCSR followed by the
-      three offsets within syscon for q6, modem and nc halt registers.
-
-  qcom,smem-states:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: States used by the AP to signal the Hexagon core
-    items:
-      - description: Stop the modem
-
-  qcom,smem-state-names:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: The names of the state bits used for SMP2P output
-    items:
-      - const: stop
-
-required:
-  - compatible
-  - reg
-  - interrupts
-  - interrupt-names
-  - clocks
-  - clock-names
-  - power-domains
-  - resets
-  - reset-names
-  - qcom,halt-regs
-  - memory-region
-  - qcom,smem-states
-  - qcom,smem-state-names
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
-    #include <dt-bindings/clock/qcom,lpass-sdm845.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
-    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
-    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
-    remoteproc@17300000 {
-        compatible = "qcom,sdm845-adsp-pil";
-        reg = <0x17300000 0x40c>;
-
-        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
-                <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-                <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-                <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-                <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-        interrupt-names = "wdog", "fatal", "ready",
-                "handover", "stop-ack";
-
-        clocks = <&rpmhcc RPMH_CXO_CLK>,
-                 <&gcc GCC_LPASS_SWAY_CLK>,
-                 <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
-                 <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
-                 <&lpasscc LPASS_QDSP6SS_XO_CLK>,
-                 <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
-                 <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
-        clock-names = "xo", "sway_cbcr",
-                "lpass_ahbs_aon_cbcr",
-                "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
-                "qdsp6ss_sleep", "qdsp6ss_core";
-
-        power-domains = <&rpmhpd SDM845_CX>;
-
-        resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
-                 <&aoss_reset AOSS_CC_LPASS_RESTART>;
-        reset-names = "pdc_sync", "cc_lpass";
-
-        qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
-
-        memory-region = <&pil_adsp_mem>;
-
-        qcom,smem-states = <&adsp_smp2p_out 0>;
-        qcom,smem-state-names = "stop";
-    };