Message ID | 1615801436-3016-10-git-send-email-dillon.minfei@gmail.com |
---|---|
State | New |
Headers | show |
Series | ARM: STM32: add art-pi(stm32h750xbh6) board support | expand |
Hi Dillon On 3/19/21 5:28 AM, dillon min wrote: > No changes, Just loop lkp in. > > > Hi lkp, > > Sorry for the late reply, thanks for your report. > This patch is to fix the build warning message. > > Thanks. > Regards > > On Mon, Mar 15, 2021 at 5:45 PM <dillon.minfei@gmail.com> wrote: >> >> From: dillon min <dillon.minfei@gmail.com> >> >> when run make dtbs_check with 'bluetoothi brcm,bcm43438-bt' >> dts enabled on stm32h7, there is a warrning popup: >> >>>> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800: 'bluetooth' >> does not match any of the regexes: 'pinctrl-[0-9]+' >> >> to make dtbs_check happy, so add a phandle bluetooth >> >> Fixes: 500cdb23d608 ("ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL board") >> Signed-off-by: dillon min <dillon.minfei@gmail.com> >> Reported-by: kernel test robot <lkp@intel.com> >> --- >> Documentation/devicetree/bindings/serial/st,stm32-uart.yaml | 5 +++++ >> 1 file changed, 5 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml >> index 8631678283f9..5e674840e62d 100644 >> --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml >> +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml >> @@ -50,6 +50,11 @@ properties: >> minItems: 1 >> maxItems: 2 >> >> + bluetooth: >> + type: object >> + description: | >> + phandles to the usart controller and bluetooth >> + Do we really need to add this "generic" property here ? You could test without the "AditionalProperties:False". Regards Alex >> # cts-gpios and rts-gpios properties can be used instead of 'uart-has-rtscts' >> # or 'st,hw-flow-ctrl' (deprecated) for making use of any gpio pins for flow >> # control instead of dedicated pins. >> -- >> 1.9.1 >>
Hi Alexandre, Thanks for the reply. On Fri, Mar 19, 2021 at 4:38 PM Alexandre TORGUE <alexandre.torgue@foss.st.com> wrote: > > Hi Dillon > > On 3/19/21 5:28 AM, dillon min wrote: > > No changes, Just loop lkp in. > > > > > > Hi lkp, > > > > Sorry for the late reply, thanks for your report. > > This patch is to fix the build warning message. > > > > Thanks. > > Regards > > > > On Mon, Mar 15, 2021 at 5:45 PM <dillon.minfei@gmail.com> wrote: > >> > >> From: dillon min <dillon.minfei@gmail.com> > >> > >> when run make dtbs_check with 'bluetoothi brcm,bcm43438-bt' > >> dts enabled on stm32h7, there is a warrning popup: > >> > >>>> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800: 'bluetooth' > >> does not match any of the regexes: 'pinctrl-[0-9]+' > >> > >> to make dtbs_check happy, so add a phandle bluetooth > >> > >> Fixes: 500cdb23d608 ("ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL board") > >> Signed-off-by: dillon min <dillon.minfei@gmail.com> > >> Reported-by: kernel test robot <lkp@intel.com> > >> --- > >> Documentation/devicetree/bindings/serial/st,stm32-uart.yaml | 5 +++++ > >> 1 file changed, 5 insertions(+) > >> > >> diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml > >> index 8631678283f9..5e674840e62d 100644 > >> --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml > >> +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml > >> @@ -50,6 +50,11 @@ properties: > >> minItems: 1 > >> maxItems: 2 > >> > >> + bluetooth: > >> + type: object > >> + description: | > >> + phandles to the usart controller and bluetooth > >> + > > Do we really need to add this "generic" property here ? You could test > without the "AditionalProperties:False". Yes, indeed. we have no reason to add a generic 'bluetooth' property into specific soc's interface yaml. I can't just remove "AditionalProperties:False", else make O=../kernel-art/ dtbs dtbs_check will run into /home/fmin/linux/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml: 'oneOf' conditional failed, one must be fixed: 'unevaluatedProperties' is a required property 'additionalProperties' is a required property ... So , i will replace "AditionalProperties:False". with unevaluatedProperties: false, do you agree with this? If so, i will send patch v4 later. Thanks. Regards > > Regards > Alex > > > >> # cts-gpios and rts-gpios properties can be used instead of 'uart-has-rtscts' > >> # or 'st,hw-flow-ctrl' (deprecated) for making use of any gpio pins for flow > >> # control instead of dedicated pins. > >> -- > >> 1.9.1 > >>
On Fri, Mar 19, 2021 at 07:13:27PM +0800, dillon min wrote: > Hi Alexandre, > > Thanks for the reply. > > On Fri, Mar 19, 2021 at 4:38 PM Alexandre TORGUE > <alexandre.torgue@foss.st.com> wrote: > > > > Hi Dillon > > > > On 3/19/21 5:28 AM, dillon min wrote: > > > No changes, Just loop lkp in. > > > > > > > > > Hi lkp, > > > > > > Sorry for the late reply, thanks for your report. > > > This patch is to fix the build warning message. > > > > > > Thanks. > > > Regards > > > > > > On Mon, Mar 15, 2021 at 5:45 PM <dillon.minfei@gmail.com> wrote: > > >> > > >> From: dillon min <dillon.minfei@gmail.com> > > >> > > >> when run make dtbs_check with 'bluetoothi brcm,bcm43438-bt' > > >> dts enabled on stm32h7, there is a warrning popup: > > >> > > >>>> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800: 'bluetooth' > > >> does not match any of the regexes: 'pinctrl-[0-9]+' > > >> > > >> to make dtbs_check happy, so add a phandle bluetooth > > >> > > >> Fixes: 500cdb23d608 ("ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL board") > > >> Signed-off-by: dillon min <dillon.minfei@gmail.com> > > >> Reported-by: kernel test robot <lkp@intel.com> > > >> --- > > >> Documentation/devicetree/bindings/serial/st,stm32-uart.yaml | 5 +++++ > > >> 1 file changed, 5 insertions(+) > > >> > > >> diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml > > >> index 8631678283f9..5e674840e62d 100644 > > >> --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml > > >> +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml > > >> @@ -50,6 +50,11 @@ properties: > > >> minItems: 1 > > >> maxItems: 2 > > >> > > >> + bluetooth: > > >> + type: object > > >> + description: | > > >> + phandles to the usart controller and bluetooth > > >> + > > > > Do we really need to add this "generic" property here ? You could test > > without the "AditionalProperties:False". > Yes, indeed. we have no reason to add a generic 'bluetooth' property > into specific soc's interface yaml. > I can't just remove "AditionalProperties:False", else make > O=../kernel-art/ dtbs dtbs_check will run into > > /home/fmin/linux/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml: > 'oneOf' conditional failed, one must be fixed: > 'unevaluatedProperties' is a required property > 'additionalProperties' is a required property > ... > > So , i will replace "AditionalProperties:False". with > unevaluatedProperties: false, do you agree with this? This is okay as long as 'serial.yaml' is referenced, but will eventually fail if not (unevaluatedProperties isn't actually implemented yet). > If so, i will send patch v4 later. Or you can do this: addtionalProperties: type: object Which means any other property has to be a node. Rob
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 8631678283f9..5e674840e62d 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -50,6 +50,11 @@ properties: minItems: 1 maxItems: 2 + bluetooth: + type: object + description: | + phandles to the usart controller and bluetooth + # cts-gpios and rts-gpios properties can be used instead of 'uart-has-rtscts' # or 'st,hw-flow-ctrl' (deprecated) for making use of any gpio pins for flow # control instead of dedicated pins.