| Message ID | 1612515104-838-5-git-send-email-alain.volmat@foss.st.com |
|---|---|
| State | New |
| Headers | show |
| Series | i2c: stm32: filter binding support & debug info | expand |
Hello Looks good to me Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Thx Regards On 2/5/21 9:51 AM, Alain Volmat wrote: > Enable the analog filter for all I2C nodes of the stm32mp151. > > Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> > --- > arch/arm/boot/dts/stm32mp151.dtsi | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi > index 3c75abacb374..558fc8fb38b6 100644 > --- a/arch/arm/boot/dts/stm32mp151.dtsi > +++ b/arch/arm/boot/dts/stm32mp151.dtsi > @@ -493,6 +493,7 @@ > #size-cells = <0>; > st,syscfg-fmp = <&syscfg 0x4 0x1>; > wakeup-source; > + i2c-analog-filter; > status = "disabled"; > }; > > @@ -508,6 +509,7 @@ > #size-cells = <0>; > st,syscfg-fmp = <&syscfg 0x4 0x2>; > wakeup-source; > + i2c-analog-filter; > status = "disabled"; > }; > > @@ -523,6 +525,7 @@ > #size-cells = <0>; > st,syscfg-fmp = <&syscfg 0x4 0x4>; > wakeup-source; > + i2c-analog-filter; > status = "disabled"; > }; > > @@ -538,6 +541,7 @@ > #size-cells = <0>; > st,syscfg-fmp = <&syscfg 0x4 0x10>; > wakeup-source; > + i2c-analog-filter; > status = "disabled"; > }; > > @@ -1533,6 +1537,7 @@ > #size-cells = <0>; > st,syscfg-fmp = <&syscfg 0x4 0x8>; > wakeup-source; > + i2c-analog-filter; > status = "disabled"; > }; > > @@ -1570,6 +1575,7 @@ > #size-cells = <0>; > st,syscfg-fmp = <&syscfg 0x4 0x20>; > wakeup-source; > + i2c-analog-filter; > status = "disabled"; > }; > > -- -- ~ Py MORDRET --
On Fri, Feb 05, 2021 at 09:51:43AM +0100, Alain Volmat wrote: > Enable the analog filter for all I2C nodes of the stm32mp151. > > Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> I usually don't take DTS patches, but they can go in now via arm-soc as I applied the patches to the driver.
Hi Wolfram On 3/18/21 11:55 AM, Wolfram Sang wrote: > On Fri, Feb 05, 2021 at 09:51:43AM +0100, Alain Volmat wrote: >> Enable the analog filter for all I2C nodes of the stm32mp151. >> >> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> > > I usually don't take DTS patches, but they can go in now via arm-soc as > I applied the patches to the driver. > I'll take it in my stm32 tree. Thanks Alex
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 3c75abacb374..558fc8fb38b6 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -493,6 +493,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x1>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -508,6 +509,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x2>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -523,6 +525,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x4>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -538,6 +541,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x10>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -1533,6 +1537,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x8>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -1570,6 +1575,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x20>; wakeup-source; + i2c-analog-filter; status = "disabled"; };
Enable the analog filter for all I2C nodes of the stm32mp151. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> --- arch/arm/boot/dts/stm32mp151.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)