@@ -557,6 +557,25 @@ static int geni_i2c_probe(struct platform_device *pdev)
gi2c->adap.dev.of_node = dev->of_node;
strlcpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
+ ret = geni_icc_get(&gi2c->se, "qup-memory");
+ if (ret)
+ return ret;
+ /*
+ * Set the bus quota for core and cpu to a reasonable value for
+ * register access.
+ * Set quota for DDR based on bus speed.
+ */
+ geni_icc_bw_init(&gi2c->se.icc_paths[GENI_TO_CORE], GENI_DEFAULT_BW,
+ 0);
+ geni_icc_bw_init(&gi2c->se.icc_paths[CPU_TO_GENI], GENI_DEFAULT_BW,
+ 0);
+ geni_icc_bw_init(&gi2c->se.icc_paths[GENI_TO_DDR],
+ Bps_to_icc(gi2c->clk_freq_out), 0);
+
+ ret = geni_icc_set_bw(&gi2c->se);
+ if (ret)
+ return ret;
+
ret = geni_se_resources_on(&gi2c->se);
if (ret) {
dev_err(dev, "Error turning on resources %d\n", ret);
@@ -579,6 +598,10 @@ static int geni_i2c_probe(struct platform_device *pdev)
return ret;
}
+ ret = geni_icc_disable(&gi2c->se);
+ if (ret)
+ return ret;
+
dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
gi2c->suspended = 1;
@@ -623,7 +646,7 @@ static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
gi2c->suspended = 1;
}
- return 0;
+ return geni_icc_disable(&gi2c->se);
}
static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
@@ -631,6 +654,10 @@ static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
int ret;
struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
+ ret = geni_icc_enable(&gi2c->se);
+ if (ret)
+ return ret;
+
ret = geni_se_resources_on(&gi2c->se);
if (ret)
return ret;
Get the interconnect paths for I2C based Serial Engine device and vote according to the bus speed of the driver. Signed-off-by: Akash Asthana <akashast@codeaurora.org> --- Changes in V2: - As per Bjorn's comment, removed se == NULL check from geni_i2c_icc_get - As per Bjorn's comment, removed code to set se->icc_path* to NULL in failure - As per Bjorn's comment, introduced and using devm_of_icc_get API for getting path handle - As per Matthias comment, added error handling for icc_set_bw call Changes in V3: - As per Matthias comment, use common library APIs defined in geni-se driver for ICC functionality. Changes in V4: - Move peak_bw guess as twice of avg_bw if nothing mentioned explicitly to ICC core. Changes in V5: - Use icc_enable/disable in power on/off call. drivers/i2c/busses/i2c-qcom-geni.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-)