diff mbox series

[RFC,v1,3/5] dt-binding: tegra: Add VI and CSI bindings

Message ID 1580235801-4129-4-git-send-email-skomatineni@nvidia.com
State New
Headers show
Series None | expand

Commit Message

Sowjanya Komatineni Jan. 28, 2020, 6:23 p.m. UTC 
Tegra contains VI controller which can support up to 6 MIPI CSI
camera sensors.

Each Tegra CSI port from CSI unit can be one-to-one mapper to
VI channel and can capture from an external camera sensor or
from built-in test pattern generator.

This patch adds dt-bindings for Tegra VI and CSI.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 .../bindings/display/tegra/nvidia,tegra20-host1x.txt           | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 9999255ac5b6..47cd6532b7d3 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -40,7 +40,7 @@  of the following host1x client modules:
 
   Required properties:
   - compatible: "nvidia,tegra<chip>-vi"
-  - reg: Physical base address and length of the controller's registers.
+  - reg: Physical base address and length of the controller registers.
   - interrupts: The interrupt outputs from the controller.
   - clocks: Must contain one entry, for the module clock.
     See ../clocks/clock-bindings.txt for details.
@@ -49,6 +49,14 @@  of the following host1x client modules:
   - reset-names: Must include the following entries:
     - vi
 
+- csi: mipi csi interface to vi
+
+  Required properties:
+  - compatible: "nvidia,tegra<chip>-csi"
+  - reg: Physical base address and length of the controller registers.
+  - clocks: Must contain entries csi, cilab, cilcd, cile clocks.
+    See ../clocks/clock-bindings.txt for details.
+
 - epp: encoder pre-processor
 
   Required properties: