From patchwork Tue Feb 13 17:45:30 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: John Garry X-Patchwork-Id: 128255 Delivered-To: patch@linaro.org Received: by 10.46.124.24 with SMTP id x24csp4453157ljc; Tue, 13 Feb 2018 08:57:24 -0800 (PST) X-Google-Smtp-Source: AH8x227pWtheXlUlKWVcsezq8OgIKQo27C25cS5HW1qtdRq5wjhZJeKmzb7MQL1k+tv2S/Qz7gBY X-Received: by 10.99.183.5 with SMTP id t5mr1515637pgf.416.1518541043873; Tue, 13 Feb 2018 08:57:23 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1518541043; cv=none; d=google.com; s=arc-20160816; b=IhxXOBXtzPAP4POhHIe1wkFKV4KmJJXP58+Ed/qjf0gfucfW8oYSthQ5D+ytV22O9+ dfC8E/Ua42EmsWTTe5yuPZoZJl9eaq4MQH+TnBlWAK2oMOThBTwj5aSW0ityz/jZmm4Q v8m4j2ngf/QuxsEhOvsYX884H2gpXvEkA3qHHXxyRXIqsvY5NnM3Xszlr9BKbJA/BGzt oVEiFi+2W8Ud9hJKWUT7lPkJ2stA+ui99q7aKym9NeHlAbBMgtGEnRQnDGwkY8QlsWuv jEWqo1hE0R0YGpuhiNnfKBiNyJwacO2aTMFi5yryvcRqAGCAn8ivJYzsHDWzRVfqt2Uf Ds0A== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:arc-authentication-results; bh=xXPlsHW922Igy+Gakvj5HrK9pJjhdrTwqdohY8HVaHg=; b=bLqa8OIyerpJCdcrHdemIaU+O0Yoy784wF0M2hf1EPxKXuovAgXNeRvD3TUNWxyrWO e+PUQS1jiAXRWysIoAr/KFWlPG7CCxTxiVF/5+t8R0J8c2VvXVRAcIqgb1MSnSNMQCf/ py7SKWSW1yIzCbj7o6vSyWtQU31svIXCbFqXBuEoBpZPWhQnjHXPvFSibx9tongr/DzD X9odgloQM5TUYR6oOcfEEz2s7htc41AUpknhpy4Rgsq+B+VDUpktMf4Ogk8WcU9dYBZ/ q13XMcwSESQWFyDm+djLFHN3DyS3jxOmojOM0QgGN3vd/YaM5YF9B2LayeJ5z+Q23TKk Omgw== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: best guess record for domain of devicetree-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=devicetree-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id m8si1180703pgu.551.2018.02.13.08.57.23; Tue, 13 Feb 2018 08:57:23 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of devicetree-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of devicetree-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=devicetree-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965257AbeBMQ5V (ORCPT + 6 others); Tue, 13 Feb 2018 11:57:21 -0500 Received: from szxga05-in.huawei.com ([45.249.212.191]:5234 "EHLO huawei.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S934933AbeBMQ4w (ORCPT ); Tue, 13 Feb 2018 11:56:52 -0500 Received: from DGGEMS409-HUB.china.huawei.com (unknown [172.30.72.59]) by Forcepoint Email with ESMTP id 3E226EE131CB6; Wed, 14 Feb 2018 00:56:36 +0800 (CST) Received: from localhost.localdomain (10.67.212.75) by DGGEMS409-HUB.china.huawei.com (10.3.19.209) with Microsoft SMTP Server id 14.3.361.1; Wed, 14 Feb 2018 00:56:27 +0800 From: John Garry To: , , , , , , , , , , , , CC: , , , , , , , , , Subject: [PATCH v13 6/9] LPC: Support the LPC host on Hip06/Hip07 with DT bindings Date: Wed, 14 Feb 2018 01:45:30 +0800 Message-ID: <1518543933-22456-7-git-send-email-john.garry@huawei.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1518543933-22456-1-git-send-email-john.garry@huawei.com> References: <1518543933-22456-1-git-send-email-john.garry@huawei.com> MIME-Version: 1.0 X-Originating-IP: [10.67.212.75] X-CFilter-Loop: Reflected Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Zhichang Yuan The low-pin-count(LPC) interface of Hip06/Hip07 accesses the peripherals in I/O port addresses. This patch implements the LPC host controller driver which perform the I/O operations on the underlying hardware. We don't want to touch those existing peripherals' driver, such as ipmi-bt. So this driver applies the indirect-IO introduced in the previous patch after registering an indirect-IO node to the indirect-IO devices list which will be searched in the I/O accessors to retrieve the host-local I/O port. The driver config is set as a bool instead of a trisate. The reason here is that, by the very nature of the driver providing a logical PIO range, it does not make sense to have this driver as a loadable module. Another more specific reason is that the Huawei D03 board which includes hip06 SoC requires the LPC bus for UART console, so should be built in. Signed-off-by: Zou Rongrong Signed-off-by: Zhichang Yuan Signed-off-by: John Garry Acked-by: Rob Herring #dts part --- .../arm/hisilicon/hisilicon-low-pin-count.txt | 33 ++ drivers/bus/Kconfig | 8 + drivers/bus/Makefile | 1 + drivers/bus/hisi_lpc.c | 507 +++++++++++++++++++++ 4 files changed, 549 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt create mode 100644 drivers/bus/hisi_lpc.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt new file mode 100644 index 0000000..213181f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt @@ -0,0 +1,33 @@ +Hisilicon Hip06 low-pin-count device + Hisilicon Hip06 SoCs implement a Low Pin Count (LPC) controller, which + provides I/O access to some legacy ISA devices. + Hip06 is based on arm64 architecture where there is no I/O space. So, the + I/O ports here are not cpu addresses, and there is no 'ranges' property in + LPC device node. + +Required properties: +- compatible: value should be as follows: + (a) "hisilicon,hip06-lpc" + (b) "hisilicon,hip07-lpc" +- #address-cells: must be 2 which stick to the ISA/EISA binding doc. +- #size-cells: must be 1 which stick to the ISA/EISA binding doc. +- reg: base memory range where the LPC register set is mapped. + +Note: + The node name before '@' must be "isa" to represent the binding stick to the + ISA/EISA binding specification. + +Example: + +isa@a01b0000 { + compatible = "hisilicon,hip06-lpc"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x0 0xa01b0000 0x0 0x1000>; + + ipmi0: bt@e4 { + compatible = "ipmi-bt"; + device_type = "ipmi"; + reg = <0x01 0xe4 0x04>; + }; +}; diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 57e011d..91debe4 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -65,6 +65,14 @@ config BRCMSTB_GISB_ARB arbiter. This driver provides timeout and target abort error handling and internal bus master decoding. +config HISILICON_LPC + bool "Support for ISA I/O space on Hisilicon hip06/7" + depends on (ARM64 && (ARCH_HISI || COMPILE_TEST)) + select INDIRECT_PIO + help + Driver needed for some legacy ISA devices attached to Low-Pin-Count + on Hisilicon hip06/7 SoC. + config IMX_WEIM bool "Freescale EIM DRIVER" depends on ARCH_MXC diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 9bcd0bf..abc7a42 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_ARM_CCI) += arm-cci.o obj-$(CONFIG_ARM_CCN) += arm-ccn.o obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmstb_gisb.o +obj-$(CONFIG_HISILICON_LPC) += hisi_lpc.o obj-$(CONFIG_IMX_WEIM) += imx-weim.o obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o diff --git a/drivers/bus/hisi_lpc.c b/drivers/bus/hisi_lpc.c new file mode 100644 index 0000000..2290cf2 --- /dev/null +++ b/drivers/bus/hisi_lpc.c @@ -0,0 +1,507 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017 Hisilicon Limited, All Rights Reserved. + * Author: Zhichang Yuan + * Author: Zou Rongrong + * Author: John Garry + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Setting this bit means each IO operation will target to a + * different port address: + * 0 means repeatedly IO operations will stick on the same port, + * such as BT; + */ +#define FG_INCRADDR_LPC 0x02 + +struct lpc_cycle_para { + unsigned int opflags; + unsigned int csize; /* the data length of each operation */ +}; + +struct hisilpc_dev { + spinlock_t cycle_lock; + void __iomem *membase; + struct logic_pio_hwaddr *io_host; +}; + +/* The maximum continuous cycles per burst */ +#define LPC_MAX_BURST 16 +/* The IO cycle counts supported is four per operation at maximum */ +#define LPC_MAX_DULEN 4 +#if LPC_MAX_DULEN > LPC_MAX_BURST +#error "LPC.. MAX_DULEN must be not bigger than MAX_OPCNT!" +#endif + +#if LPC_MAX_BURST % LPC_MAX_DULEN +#error "LPC.. LPC_MAX_BURST must be multiple of LPC_MAX_DULEN!" +#endif + +#define LPC_REG_START 0x00 /* start a new LPC cycle */ +#define LPC_REG_OP_STATUS 0x04 /* the current LPC status */ +#define LPC_REG_IRQ_ST 0x08 /* interrupt enable&status */ +#define LPC_REG_OP_LEN 0x10 /* how many LPC cycles each start */ +#define LPC_REG_CMD 0x14 /* command for the required LPC cycle */ +#define LPC_REG_ADDR 0x20 /* LPC target address */ +#define LPC_REG_WDATA 0x24 /* data to be written */ +#define LPC_REG_RDATA 0x28 /* data coming from peer */ + + +/* The command register fields */ +#define LPC_CMD_SAMEADDR 0x08 +#define LPC_CMD_TYPE_IO 0x00 +#define LPC_CMD_WRITE 0x01 +#define LPC_CMD_READ 0x00 +/* the bit attribute is W1C. 1 represents OK. */ +#define LPC_STAT_BYIRQ 0x02 + +#define LPC_STATUS_IDLE 0x01 +#define LPC_OP_FINISHED 0x02 + +#define LPC_START_WORK 0x01 + +/* The minimal nanosecond interval for each query on LPC cycle status. */ +#define LPC_NSEC_PERWAIT 100 +/* + * The maximum waiting time is about 128us. + * It is specific for stream I/O, such as ins. + * The fastest IO cycle time is about 390ns, but the worst case will wait + * for extra 256 lpc clocks, so (256 + 13) * 30ns = 8 us. The maximum + * burst cycles is 16. So, the maximum waiting time is about 128us under + * worst case. + * choose 1300 as the maximum. + */ +#define LPC_MAX_WAITCNT 1300 +/* About 10us. This is specific for single IO operation, such as inb. */ +#define LPC_PEROP_WAITCNT 100 + +static inline int wait_lpc_idle(unsigned char *mbase, + unsigned int waitcnt) { + u32 opstatus; + + while (waitcnt--) { + ndelay(LPC_NSEC_PERWAIT); + opstatus = readl(mbase + LPC_REG_OP_STATUS); + if (opstatus & LPC_STATUS_IDLE) + return (opstatus & LPC_OP_FINISHED) ? 0 : (-EIO); + } + return -ETIME; +} + +/* + * hisilpc_target_in - trigger a series of lpc cycles to read required data + * from target peripheral. + * @lpcdev: pointer to hisi lpc device + * @para: some parameters used to control the lpc I/O operations + * @ptaddr: the lpc I/O target port address + * @buf: where the read back data is stored + * @opcnt: how many I/O operations required in this calling + * + * Only one byte data is read each I/O operation. + * + * Returns 0 on success, non-zero on fail. + */ +static int +hisilpc_target_in(struct hisilpc_dev *lpcdev, struct lpc_cycle_para *para, + unsigned long ptaddr, unsigned char *buf, + unsigned long opcnt) +{ + unsigned long cnt_per_trans; + unsigned int cmd_word; + unsigned int waitcnt; + int ret; + + if (!buf || !opcnt || !para || !para->csize || !lpcdev) + return -EINVAL; + + cmd_word = LPC_CMD_TYPE_IO | LPC_CMD_READ; + waitcnt = LPC_PEROP_WAITCNT; + if (!(para->opflags & FG_INCRADDR_LPC)) { + cmd_word |= LPC_CMD_SAMEADDR; + waitcnt = LPC_MAX_WAITCNT; + } + + ret = 0; + cnt_per_trans = (para->csize == 1) ? opcnt : para->csize; + for (; opcnt && !ret; cnt_per_trans = para->csize) { + unsigned long flags; + + /* whole operation must be atomic */ + spin_lock_irqsave(&lpcdev->cycle_lock, flags); + + writel_relaxed(cnt_per_trans, lpcdev->membase + LPC_REG_OP_LEN); + + writel_relaxed(cmd_word, lpcdev->membase + LPC_REG_CMD); + + writel_relaxed(ptaddr, lpcdev->membase + LPC_REG_ADDR); + + writel(LPC_START_WORK, lpcdev->membase + LPC_REG_START); + + /* whether the operation is finished */ + ret = wait_lpc_idle(lpcdev->membase, waitcnt); + if (!ret) { + opcnt -= cnt_per_trans; + for (cnt_per_trans--; cnt_per_trans--; buf++) + *buf = readb_relaxed(lpcdev->membase + + LPC_REG_RDATA); + *buf = readb(lpcdev->membase + LPC_REG_RDATA); + } + + spin_unlock_irqrestore(&lpcdev->cycle_lock, flags); + } + + return ret; +} + +/* + * hisilpc_target_out - trigger a series of lpc cycles to write required + * data to target peripheral. + * @lpcdev: pointer to hisi lpc device + * @para: some parameters used to control the lpc I/O operations + * @ptaddr: the lpc I/O target port address + * @buf: where the data to be written is stored + * @opcnt: how many I/O operations required + * + * Only one byte data is read each I/O operation. + * + * Returns 0 on success, non-zero on fail. + * + */ +static int +hisilpc_target_out(struct hisilpc_dev *lpcdev, struct lpc_cycle_para *para, + unsigned long ptaddr, const unsigned char *buf, + unsigned long opcnt) +{ + unsigned long cnt_per_trans; + unsigned int cmd_word; + unsigned int waitcnt; + int ret; + + if (!buf || !opcnt || !para || !lpcdev) + return -EINVAL; + + /* default is increasing address */ + cmd_word = LPC_CMD_TYPE_IO | LPC_CMD_WRITE; + waitcnt = LPC_PEROP_WAITCNT; + if (!(para->opflags & FG_INCRADDR_LPC)) { + cmd_word |= LPC_CMD_SAMEADDR; + waitcnt = LPC_MAX_WAITCNT; + } + + ret = 0; + cnt_per_trans = (para->csize == 1) ? opcnt : para->csize; + for (; opcnt && !ret; cnt_per_trans = para->csize) { + unsigned long flags; + + spin_lock_irqsave(&lpcdev->cycle_lock, flags); + + writel_relaxed(cnt_per_trans, lpcdev->membase + LPC_REG_OP_LEN); + writel_relaxed(cmd_word, lpcdev->membase + LPC_REG_CMD); + writel_relaxed(ptaddr, lpcdev->membase + LPC_REG_ADDR); + + opcnt -= cnt_per_trans; + for (; cnt_per_trans--; buf++) + writeb_relaxed(*buf, lpcdev->membase + LPC_REG_WDATA); + + writel(LPC_START_WORK, lpcdev->membase + LPC_REG_START); + + /* whether the operation is finished */ + ret = wait_lpc_idle(lpcdev->membase, waitcnt); + + spin_unlock_irqrestore(&lpcdev->cycle_lock, flags); + } + + return ret; +} + +static inline unsigned long +hisi_lpc_pio_to_addr(struct hisilpc_dev *lpcdev, unsigned long pio) +{ + return pio - lpcdev->io_host->io_start + + lpcdev->io_host->hw_start; +} + + +/** + * hisilpc_comm_in - read/input the data from the I/O peripheral + * through LPC. + * @devobj: pointer to the device information relevant to LPC controller. + * @pio: the target I/O port address. + * @dlen: the data length required to read from the target I/O port. + * + * when succeed, the data read back is stored in buffer pointed by inbuf. + * For inb, return the data read from I/O or -1 when error occur. + */ +static u32 hisilpc_comm_in(void *devobj, unsigned long pio, size_t dlen) +{ + int ret = 0; + unsigned char rd_data = 0; + unsigned long ptaddr; + struct lpc_cycle_para iopara; + struct hisilpc_dev *lpcdev = devobj; + + if (!lpcdev || !dlen || dlen > LPC_MAX_DULEN) + return -1; + + ptaddr = hisi_lpc_pio_to_addr(lpcdev, pio); + + iopara.opflags = FG_INCRADDR_LPC; + iopara.csize = dlen; + + ret = hisilpc_target_in(lpcdev, &iopara, ptaddr, &rd_data, dlen); + if (ret) + return -1; + + return le32_to_cpu((u32)rd_data); +} + +/** + * hisilpc_comm_out - output the data whose maximum length is four bytes + to the I/O peripheral through the LPC host. + * @devobj: pointer to the device information relevant to LPC controller. + * @pio: the target I/O port address. + * @outval: a value to be outputted from caller, maximum is four bytes. + * @dlen: the data length required writing to the target I/O port. + * + * This function is corresponding to out(b,w,l) only + * + */ +static void hisilpc_comm_out(void *devobj, unsigned long pio, + u32 outval, size_t dlen) +{ + unsigned long ptaddr; + struct hisilpc_dev *lpcdev = devobj; + struct lpc_cycle_para iopara; + const unsigned char *newbuf; + + if (!lpcdev || !dlen || dlen > LPC_MAX_DULEN) + return; + + outval = cpu_to_le32(outval); + + newbuf = (const unsigned char *)&outval; + ptaddr = hisi_lpc_pio_to_addr(lpcdev, pio); + + iopara.opflags = FG_INCRADDR_LPC; + iopara.csize = dlen; + + hisilpc_target_out(lpcdev, &iopara, ptaddr, newbuf, dlen); +} + +/* + * hisilpc_comm_ins - read/input the data in buffer to the I/O + * peripheral through LPC, it corresponds to ins(b,w,l) + * @devobj: pointer to the device information relevant to LPC controller. + * @pio: the target I/O port address. + * @inbuf: a buffer where read/input data bytes are stored. + * @dlen: the data length required writing to the target I/O port. + * @count: how many data units whose length is dlen will be read. + * + * when succeed, the data read back is stored in buffer pointed by inbuf. + * Returns 0 on success, -errno otherwise + * + */ +static u32 +hisilpc_comm_ins(void *devobj, unsigned long pio, void *inbuf, + size_t dlen, unsigned int count) +{ + struct hisilpc_dev *lpcdev = devobj; + struct lpc_cycle_para iopara; + unsigned char *newbuf; + unsigned int loopcnt, cntleft; + unsigned long ptaddr; + + if (!lpcdev || !inbuf || !count || !dlen || dlen > LPC_MAX_DULEN || + count % dlen) + return -EINVAL; + + iopara.opflags = 0; + if (dlen > 1) + iopara.opflags |= FG_INCRADDR_LPC; + iopara.csize = dlen; + + ptaddr = hisi_lpc_pio_to_addr(lpcdev, pio); + newbuf = inbuf; + /* + * ensure data stream whose length is multiple of dlen to be processed + * each IO input + */ + cntleft = count * dlen; + do { + int ret; + + loopcnt = min_t(unsigned int, LPC_MAX_BURST, cntleft); + ret = hisilpc_target_in(lpcdev, &iopara, ptaddr, + newbuf, loopcnt); + if (ret) + return ret; + newbuf += loopcnt; + cntleft -= loopcnt; + } while (cntleft); + + return 0; +} + +/* + * hisilpc_comm_outs - write/output the data in buffer to the I/O + * peripheral through LPC, it corresponds to outs(b,w,l) + * @devobj: pointer to the device information relevant to LPC controller. + * @pio: the target I/O port address. + * @outbuf: a buffer where write/output data bytes are stored. + * @dlen: the data length required writing to the target I/O port . + * @count: how many data units whose length is dlen will be written. + * + */ +static void +hisilpc_comm_outs(void *devobj, unsigned long pio, const void *outbuf, + size_t dlen, unsigned int count) +{ + struct hisilpc_dev *lpcdev = devobj; + struct lpc_cycle_para iopara; + const unsigned char *newbuf; + unsigned int loopcnt, cntleft; + unsigned long ptaddr; + + if (!lpcdev || !outbuf || !count || !dlen || dlen > LPC_MAX_DULEN || + count % dlen) + return; + + iopara.opflags = 0; + if (dlen > 1) + iopara.opflags |= FG_INCRADDR_LPC; + iopara.csize = dlen; + + ptaddr = hisi_lpc_pio_to_addr(lpcdev, pio); + newbuf = outbuf; + /* + * ensure data stream whose length is multiple of dlen to be processed + * each IO input + */ + cntleft = count * dlen; + do { + loopcnt = min_t(unsigned int, LPC_MAX_BURST, cntleft); + if (hisilpc_target_out(lpcdev, &iopara, ptaddr, newbuf, + loopcnt)) + break; + newbuf += loopcnt; + cntleft -= loopcnt; + } while (cntleft); +} + +static struct hostio_ops hisi_lpc_ops = { + .pfin = hisilpc_comm_in, + .pfout = hisilpc_comm_out, + .pfins = hisilpc_comm_ins, + .pfouts = hisilpc_comm_outs, +}; + +/** + * hisilpc_probe - the probe callback function for hisi lpc device, + * will finish all the initialization. + * @pdev: the platform device corresponding to hisi lpc + * + * Returns 0 on success, non-zero on fail. + */ +static int hisilpc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct hisilpc_dev *lpcdev; + int ret = 0; + + lpcdev = devm_kzalloc(dev, sizeof(struct hisilpc_dev), GFP_KERNEL); + if (!lpcdev) + return -ENOMEM; + + spin_lock_init(&lpcdev->cycle_lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + lpcdev->membase = devm_ioremap_resource(dev, res); + if (IS_ERR(lpcdev->membase)) { + dev_err(dev, "remap failed\n"); + return PTR_ERR(lpcdev->membase); + } + + /* register the LPC host PIO resources */ + { + struct logic_pio_hwaddr *range; + + range = devm_kzalloc(dev, sizeof(*range), GFP_KERNEL); + if (!range) + return -ENOMEM; + range->fwnode = dev->fwnode; + range->flags = PIO_INDIRECT; + range->size = PIO_INDIRECT_SIZE; + + ret = logic_pio_register_range(range); + if (ret) { + kfree(range); + dev_err(dev, "register IO range failed (%d)!\n", ret); + return -ret; + } + lpcdev->io_host = range; + + /* + * It is time to start the children scanning: + * For ACPI children, the corresponding devices had been + * created during the ACPI enumeration. + * The OF scanning must be performed after initialization of + * 'lpcdev' to avoid some children which complete the scanning + * trigger the MMIO accesses which will probably cause a panic. + */ + ret = of_platform_populate(dev->of_node, NULL, NULL, dev); + if (ret) { + /* + * When LPC probing is not completely successful, set + * 'devpara' as NULL. This will make all the LPC I/O + * return failure directly without any hardware + * operations. It will prevent some peripherals which + * had not finished the initialization to manipulate + * I/O for safety. + */ + lpcdev->io_host->devpara = NULL; + dev_err(dev, "populate children failed(%d)\n", ret); + return ret; + } + } + lpcdev->io_host->devpara = lpcdev; + lpcdev->io_host->ops = &hisi_lpc_ops; + + dev_info(dev, "registered range[%pa - sz:%pa]\n", + &lpcdev->io_host->io_start, + &lpcdev->io_host->size); + + return ret; +} + +static const struct of_device_id hisilpc_of_match[] = { + { .compatible = "hisilicon,hip06-lpc", }, + { .compatible = "hisilicon,hip07-lpc", }, + {}, +}; + +static struct platform_driver hisilpc_driver = { + .driver = { + .name = "hisi_lpc", + .of_match_table = hisilpc_of_match, + }, + .probe = hisilpc_probe, +}; + +builtin_platform_driver(hisilpc_driver);