From patchwork Wed Sep 14 13:27:39 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Peter Griffin X-Patchwork-Id: 76182 Delivered-To: patch@linaro.org Received: by 10.140.106.72 with SMTP id d66csp1875967qgf; Wed, 14 Sep 2016 06:28:48 -0700 (PDT) X-Received: by 10.98.80.78 with SMTP id e75mr466423pfb.131.1473859728197; Wed, 14 Sep 2016 06:28:48 -0700 (PDT) Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id q189si33559375pfq.189.2016.09.14.06.28.47; Wed, 14 Sep 2016 06:28:48 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of devicetree-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org; spf=pass (google.com: best guess record for domain of devicetree-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=devicetree-owner@vger.kernel.org; dmarc=fail (p=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755879AbcINN2q (ORCPT + 7 others); Wed, 14 Sep 2016 09:28:46 -0400 Received: from mail-wm0-f50.google.com ([74.125.82.50]:35899 "EHLO mail-wm0-f50.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756110AbcINN2o (ORCPT ); Wed, 14 Sep 2016 09:28:44 -0400 Received: by mail-wm0-f50.google.com with SMTP id b187so47320981wme.1 for ; Wed, 14 Sep 2016 06:28:43 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=jCu0XmcYgDjLIswFbX39r3iQ8ciE/WyYKJ9jBnUfaVU=; b=M0u2GMbD9r4H8U1b9+iPwZ6U6TYZmueosjOc2aWGPZ7H787jRNwWG1CD76TdGQcAig XSJm9e95grh+VFy7VLCuqgmRpVxxEHyZmrf7llmV2xT/5RPjyPZ4Fy55S6kq+MvJCNDz jDwjcqcPjGITo2pAtwjlFlApmfCQ2a/u3Z/Vc= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=jCu0XmcYgDjLIswFbX39r3iQ8ciE/WyYKJ9jBnUfaVU=; b=Fo/VuT2SOcTezFmzdYHPZ/j2qRlrr1w670W0ZHwHIOZjHoIjbjWKkTpjbfG6J1dlfF v2sCf5zY1d00tlE/GudIAttI/IyOaITXmdJ3lyTxKg1WlnabCeu0XFHqEhHGHKz/rL/D ip4Gfa8YcG4Gsd0Kb5BDCHI8mx9d86eL/h0oUPINutR5iUo1fgMtEHq6kDMFan+a0O2v gos3Z35rTq8jzIk4lVyNvobfjYpdgB7kz0n/eW9n9Bw2RMBCSBrJlvghZ0z7bAuPkK8V aF4COUJyiMmGYDZw4plUYXcgiDo7E9U1CHeXRiUe8AwH4zNn8n7PHS7Hua8s3J82bSQj mW1w== X-Gm-Message-State: AE9vXwMLL2fDctAWWtFKv4t+w63ZY8Nk+l1tHVVEtxsx4pn1rxv9UmVaSHevaEI1F8eJAlGx X-Received: by 10.194.97.242 with SMTP id ed18mr2661141wjb.188.1473859721200; Wed, 14 Sep 2016 06:28:41 -0700 (PDT) Received: from localhost.localdomain (cpc89244-aztw30-2-0-cust4998.18-1.cable.virginm.net. [86.31.179.135]) by smtp.gmail.com with ESMTPSA id c5sm4212812wjw.29.2016.09.14.06.28.39 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Wed, 14 Sep 2016 06:28:40 -0700 (PDT) From: Peter Griffin To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kernel@stlinux.com, patrice.chotard@st.com, devicetree@vger.kernel.org Cc: peter.griffin@linaro.org, lee.jones@linaro.org, Subject: [PATCH 01/19] phy: phy-miphy365x: Remove miphy365 driver and dt binding documentation. Date: Wed, 14 Sep 2016 14:27:39 +0100 Message-Id: <1473859677-9231-2-git-send-email-peter.griffin@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1473859677-9231-1-git-send-email-peter.griffin@linaro.org> References: <1473859677-9231-1-git-send-email-peter.griffin@linaro.org> MIME-Version: 1.0 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org This phy is only used on STiH415/6 based silicon, and support for these SoC's is being removed from the kernel. Signed-off-by: Peter Griffin Cc: --- .../devicetree/bindings/phy/phy-miphy365x.txt | 77 --- drivers/phy/Kconfig | 10 - drivers/phy/Makefile | 1 - drivers/phy/phy-miphy365x.c | 625 --------------------- 4 files changed, 713 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/phy-miphy365x.txt delete mode 100644 drivers/phy/phy-miphy365x.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Acked-by: Rob Herring diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt deleted file mode 100644 index 8772900..0000000 --- a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt +++ /dev/null @@ -1,77 +0,0 @@ -STMicroelectronics STi MIPHY365x PHY binding -============================================ - -This binding describes a miphy device that is used to control PHY hardware -for SATA and PCIe. - -Required properties (controller (parent) node): -- compatible : Should be "st,miphy365x-phy" -- st,syscfg : Phandle / integer array property. Phandle of sysconfig group - containing the miphy registers and integer array should contain - an entry for each port sub-node, specifying the control - register offset inside the sysconfig group. - -Required nodes : A sub-node is required for each channel the controller - provides. Address range information including the usual - 'reg' and 'reg-names' properties are used inside these - nodes to describe the controller's topology. These nodes - are translated by the driver's .xlate() function. - -Required properties (port (child) node): -- #phy-cells : Should be 1 (See second example) - Cell after port phandle is device type from: - - PHY_TYPE_SATA - - PHY_TYPE_PCI -- reg : Address and length of register sets for each device in - "reg-names" -- reg-names : The names of the register addresses corresponding to the - registers filled in "reg": - - sata: For SATA devices - - pcie: For PCIe devices - -Optional properties (port (child) node): -- st,sata-gen : Generation of locally attached SATA IP. Expected values - are {1,2,3). If not supplied generation 1 hardware will - be expected -- st,pcie-tx-pol-inv : Bool property to invert the polarity PCIe Tx (Txn/Txp) -- st,sata-tx-pol-inv : Bool property to invert the polarity SATA Tx (Txn/Txp) - -Example: - - miphy365x_phy: miphy365x@fe382000 { - compatible = "st,miphy365x-phy"; - st,syscfg = <&syscfg_rear 0x824 0x828>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - phy_port0: port@fe382000 { - reg = <0xfe382000 0x100>, <0xfe394000 0x100>; - reg-names = "sata", "pcie"; - #phy-cells = <1>; - st,sata-gen = <3>; - }; - - phy_port1: port@fe38a000 { - reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;; - reg-names = "sata", "pcie", "syscfg"; - #phy-cells = <1>; - st,pcie-tx-pol-inv; - }; - }; - -Specifying phy control of devices -================================= - -Device nodes should specify the configuration required in their "phys" -property, containing a phandle to the phy port node and a device type. - -Example: - -#include - - sata0: sata@fe380000 { - ... - phys = <&phy_port0 PHY_TYPE_SATA>; - ... - }; diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 19bff3a..d1f22ac 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -120,16 +120,6 @@ config PHY_MIPHY28LP Enable this to support the miphy transceiver (for SATA/PCIE/USB3) that is part of STMicroelectronics STiH407 SoC. -config PHY_MIPHY365X - tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" - depends on ARCH_STI - depends on HAS_IOMEM - depends on OF - select GENERIC_PHY - help - Enable this to support the miphy transceiver (for SATA/PCIE) - that is part of STMicroelectronics STiH41x SoC series. - config PHY_RCAR_GEN2 tristate "Renesas R-Car generation 2 USB PHY driver" depends on ARCH_RENESAS diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 90ae198..d169d80 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -17,7 +17,6 @@ obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o -obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c deleted file mode 100644 index e661f3b..0000000 --- a/drivers/phy/phy-miphy365x.c +++ /dev/null @@ -1,625 +0,0 @@ -/* - * Copyright (C) 2014 STMicroelectronics – All Rights Reserved - * - * STMicroelectronics PHY driver MiPHY365 (for SoC STiH416). - * - * Authors: Alexandre Torgue - * Lee Jones - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define HFC_TIMEOUT 100 - -#define SYSCFG_SELECT_SATA_MASK BIT(1) -#define SYSCFG_SELECT_SATA_POS 1 - -/* MiPHY365x register definitions */ -#define RESET_REG 0x00 -#define RST_PLL BIT(1) -#define RST_PLL_CAL BIT(2) -#define RST_RX BIT(4) -#define RST_MACRO BIT(7) - -#define STATUS_REG 0x01 -#define IDLL_RDY BIT(0) -#define PLL_RDY BIT(1) -#define DES_BIT_LOCK BIT(2) -#define DES_SYMBOL_LOCK BIT(3) - -#define CTRL_REG 0x02 -#define TERM_EN BIT(0) -#define PCI_EN BIT(2) -#define DES_BIT_LOCK_EN BIT(3) -#define TX_POL BIT(5) - -#define INT_CTRL_REG 0x03 - -#define BOUNDARY1_REG 0x10 -#define SPDSEL_SEL BIT(0) - -#define BOUNDARY3_REG 0x12 -#define TX_SPDSEL_GEN1_VAL 0 -#define TX_SPDSEL_GEN2_VAL 0x01 -#define TX_SPDSEL_GEN3_VAL 0x02 -#define RX_SPDSEL_GEN1_VAL 0 -#define RX_SPDSEL_GEN2_VAL (0x01 << 3) -#define RX_SPDSEL_GEN3_VAL (0x02 << 3) - -#define PCIE_REG 0x16 - -#define BUF_SEL_REG 0x20 -#define CONF_GEN_SEL_GEN3 0x02 -#define CONF_GEN_SEL_GEN2 0x01 -#define PD_VDDTFILTER BIT(4) - -#define TXBUF1_REG 0x21 -#define SWING_VAL 0x04 -#define SWING_VAL_GEN1 0x03 -#define PREEMPH_VAL (0x3 << 5) - -#define TXBUF2_REG 0x22 -#define TXSLEW_VAL 0x2 -#define TXSLEW_VAL_GEN1 0x4 - -#define RXBUF_OFFSET_CTRL_REG 0x23 - -#define RXBUF_REG 0x25 -#define SDTHRES_VAL 0x01 -#define EQ_ON3 (0x03 << 4) -#define EQ_ON1 (0x01 << 4) - -#define COMP_CTRL1_REG 0x40 -#define START_COMSR BIT(0) -#define START_COMZC BIT(1) -#define COMSR_DONE BIT(2) -#define COMZC_DONE BIT(3) -#define COMP_AUTO_LOAD BIT(4) - -#define COMP_CTRL2_REG 0x41 -#define COMP_2MHZ_RAT_GEN1 0x1e -#define COMP_2MHZ_RAT 0xf - -#define COMP_CTRL3_REG 0x42 -#define COMSR_COMP_REF 0x33 - -#define COMP_IDLL_REG 0x47 -#define COMZC_IDLL 0x2a - -#define PLL_CTRL1_REG 0x50 -#define PLL_START_CAL BIT(0) -#define BUF_EN BIT(2) -#define SYNCHRO_TX BIT(3) -#define SSC_EN BIT(6) -#define CONFIG_PLL BIT(7) - -#define PLL_CTRL2_REG 0x51 -#define BYPASS_PLL_CAL BIT(1) - -#define PLL_RAT_REG 0x52 - -#define PLL_SSC_STEP_MSB_REG 0x56 -#define PLL_SSC_STEP_MSB_VAL 0x03 - -#define PLL_SSC_STEP_LSB_REG 0x57 -#define PLL_SSC_STEP_LSB_VAL 0x63 - -#define PLL_SSC_PER_MSB_REG 0x58 -#define PLL_SSC_PER_MSB_VAL 0 - -#define PLL_SSC_PER_LSB_REG 0x59 -#define PLL_SSC_PER_LSB_VAL 0xf1 - -#define IDLL_TEST_REG 0x72 -#define START_CLK_HF BIT(6) - -#define DES_BITLOCK_REG 0x86 -#define BIT_LOCK_LEVEL 0x01 -#define BIT_LOCK_CNT_512 (0x03 << 5) - -struct miphy365x_phy { - struct phy *phy; - void __iomem *base; - bool pcie_tx_pol_inv; - bool sata_tx_pol_inv; - u32 sata_gen; - u32 ctrlreg; - u8 type; -}; - -struct miphy365x_dev { - struct device *dev; - struct regmap *regmap; - struct mutex miphy_mutex; - struct miphy365x_phy **phys; - int nphys; -}; - -/* - * These values are represented in Device tree. They are considered to be ABI - * and although they can be extended any existing values must not change. - */ -enum miphy_sata_gen { - SATA_GEN1 = 1, - SATA_GEN2, - SATA_GEN3 -}; - -static u8 rx_tx_spd[] = { - 0, /* GEN0 doesn't exist. */ - TX_SPDSEL_GEN1_VAL | RX_SPDSEL_GEN1_VAL, - TX_SPDSEL_GEN2_VAL | RX_SPDSEL_GEN2_VAL, - TX_SPDSEL_GEN3_VAL | RX_SPDSEL_GEN3_VAL -}; - -/* - * This function selects the system configuration, - * either two SATA, one SATA and one PCIe, or two PCIe lanes. - */ -static int miphy365x_set_path(struct miphy365x_phy *miphy_phy, - struct miphy365x_dev *miphy_dev) -{ - bool sata = (miphy_phy->type == PHY_TYPE_SATA); - - return regmap_update_bits(miphy_dev->regmap, - miphy_phy->ctrlreg, - SYSCFG_SELECT_SATA_MASK, - sata << SYSCFG_SELECT_SATA_POS); -} - -static int miphy365x_init_pcie_port(struct miphy365x_phy *miphy_phy, - struct miphy365x_dev *miphy_dev) -{ - u8 val; - - if (miphy_phy->pcie_tx_pol_inv) { - /* Invert Tx polarity and clear pci_txdetect_pol bit */ - val = TERM_EN | PCI_EN | DES_BIT_LOCK_EN | TX_POL; - writeb_relaxed(val, miphy_phy->base + CTRL_REG); - writeb_relaxed(0x00, miphy_phy->base + PCIE_REG); - } - - return 0; -} - -static inline int miphy365x_hfc_not_rdy(struct miphy365x_phy *miphy_phy, - struct miphy365x_dev *miphy_dev) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(HFC_TIMEOUT); - u8 mask = IDLL_RDY | PLL_RDY; - u8 regval; - - do { - regval = readb_relaxed(miphy_phy->base + STATUS_REG); - if (!(regval & mask)) - return 0; - - usleep_range(2000, 2500); - } while (time_before(jiffies, timeout)); - - dev_err(miphy_dev->dev, "HFC ready timeout!\n"); - return -EBUSY; -} - -static inline int miphy365x_rdy(struct miphy365x_phy *miphy_phy, - struct miphy365x_dev *miphy_dev) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(HFC_TIMEOUT); - u8 mask = IDLL_RDY | PLL_RDY; - u8 regval; - - do { - regval = readb_relaxed(miphy_phy->base + STATUS_REG); - if ((regval & mask) == mask) - return 0; - - usleep_range(2000, 2500); - } while (time_before(jiffies, timeout)); - - dev_err(miphy_dev->dev, "PHY not ready timeout!\n"); - return -EBUSY; -} - -static inline void miphy365x_set_comp(struct miphy365x_phy *miphy_phy, - struct miphy365x_dev *miphy_dev) -{ - u8 val, mask; - - if (miphy_phy->sata_gen == SATA_GEN1) - writeb_relaxed(COMP_2MHZ_RAT_GEN1, - miphy_phy->base + COMP_CTRL2_REG); - else - writeb_relaxed(COMP_2MHZ_RAT, - miphy_phy->base + COMP_CTRL2_REG); - - if (miphy_phy->sata_gen != SATA_GEN3) { - writeb_relaxed(COMSR_COMP_REF, - miphy_phy->base + COMP_CTRL3_REG); - /* - * Force VCO current to value defined by address 0x5A - * and disable PCIe100Mref bit - * Enable auto load compensation for pll_i_bias - */ - writeb_relaxed(BYPASS_PLL_CAL, miphy_phy->base + PLL_CTRL2_REG); - writeb_relaxed(COMZC_IDLL, miphy_phy->base + COMP_IDLL_REG); - } - - /* - * Force restart compensation and enable auto load - * for Comzc_Tx, Comzc_Rx and Comsr on macro - */ - val = START_COMSR | START_COMZC | COMP_AUTO_LOAD; - writeb_relaxed(val, miphy_phy->base + COMP_CTRL1_REG); - - mask = COMSR_DONE | COMZC_DONE; - while ((readb_relaxed(miphy_phy->base + COMP_CTRL1_REG) & mask) != mask) - cpu_relax(); -} - -static inline void miphy365x_set_ssc(struct miphy365x_phy *miphy_phy, - struct miphy365x_dev *miphy_dev) -{ - u8 val; - - /* - * SSC Settings. SSC will be enabled through Link - * SSC Ampl. = 0.4% - * SSC Freq = 31KHz - */ - writeb_relaxed(PLL_SSC_STEP_MSB_VAL, - miphy_phy->base + PLL_SSC_STEP_MSB_REG); - writeb_relaxed(PLL_SSC_STEP_LSB_VAL, - miphy_phy->base + PLL_SSC_STEP_LSB_REG); - writeb_relaxed(PLL_SSC_PER_MSB_VAL, - miphy_phy->base + PLL_SSC_PER_MSB_REG); - writeb_relaxed(PLL_SSC_PER_LSB_VAL, - miphy_phy->base + PLL_SSC_PER_LSB_REG); - - /* SSC Settings complete */ - if (miphy_phy->sata_gen == SATA_GEN1) { - val = PLL_START_CAL | BUF_EN | SYNCHRO_TX | CONFIG_PLL; - writeb_relaxed(val, miphy_phy->base + PLL_CTRL1_REG); - } else { - val = SSC_EN | PLL_START_CAL | BUF_EN | SYNCHRO_TX | CONFIG_PLL; - writeb_relaxed(val, miphy_phy->base + PLL_CTRL1_REG); - } -} - -static int miphy365x_init_sata_port(struct miphy365x_phy *miphy_phy, - struct miphy365x_dev *miphy_dev) -{ - int ret; - u8 val; - - /* - * Force PHY macro reset, PLL calibration reset, PLL reset - * and assert Deserializer Reset - */ - val = RST_PLL | RST_PLL_CAL | RST_RX | RST_MACRO; - writeb_relaxed(val, miphy_phy->base + RESET_REG); - - if (miphy_phy->sata_tx_pol_inv) - writeb_relaxed(TX_POL, miphy_phy->base + CTRL_REG); - - /* - * Force macro1 to use rx_lspd, tx_lspd - * Force Rx_Clock on first I-DLL phase - * Force Des in HP mode on macro, rx_lspd, tx_lspd for Gen2/3 - */ - writeb_relaxed(SPDSEL_SEL, miphy_phy->base + BOUNDARY1_REG); - writeb_relaxed(START_CLK_HF, miphy_phy->base + IDLL_TEST_REG); - val = rx_tx_spd[miphy_phy->sata_gen]; - writeb_relaxed(val, miphy_phy->base + BOUNDARY3_REG); - - /* Wait for HFC_READY = 0 */ - ret = miphy365x_hfc_not_rdy(miphy_phy, miphy_dev); - if (ret) - return ret; - - /* Compensation Recalibration */ - miphy365x_set_comp(miphy_phy, miphy_dev); - - switch (miphy_phy->sata_gen) { - case SATA_GEN3: - /* - * TX Swing target 550-600mv peak to peak diff - * Tx Slew target 90-110ps rising/falling time - * Rx Eq ON3, Sigdet threshold SDTH1 - */ - val = PD_VDDTFILTER | CONF_GEN_SEL_GEN3; - writeb_relaxed(val, miphy_phy->base + BUF_SEL_REG); - val = SWING_VAL | PREEMPH_VAL; - writeb_relaxed(val, miphy_phy->base + TXBUF1_REG); - writeb_relaxed(TXSLEW_VAL, miphy_phy->base + TXBUF2_REG); - writeb_relaxed(0x00, miphy_phy->base + RXBUF_OFFSET_CTRL_REG); - val = SDTHRES_VAL | EQ_ON3; - writeb_relaxed(val, miphy_phy->base + RXBUF_REG); - break; - case SATA_GEN2: - /* - * conf gen sel=0x1 to program Gen2 banked registers - * VDDT filter ON - * Tx Swing target 550-600mV peak-to-peak diff - * Tx Slew target 90-110 ps rising/falling time - * RX Equalization ON1, Sigdet threshold SDTH1 - */ - writeb_relaxed(CONF_GEN_SEL_GEN2, - miphy_phy->base + BUF_SEL_REG); - writeb_relaxed(SWING_VAL, miphy_phy->base + TXBUF1_REG); - writeb_relaxed(TXSLEW_VAL, miphy_phy->base + TXBUF2_REG); - val = SDTHRES_VAL | EQ_ON1; - writeb_relaxed(val, miphy_phy->base + RXBUF_REG); - break; - case SATA_GEN1: - /* - * conf gen sel = 00b to program Gen1 banked registers - * VDDT filter ON - * Tx Swing target 500-550mV peak-to-peak diff - * Tx Slew target120-140 ps rising/falling time - */ - writeb_relaxed(PD_VDDTFILTER, miphy_phy->base + BUF_SEL_REG); - writeb_relaxed(SWING_VAL_GEN1, miphy_phy->base + TXBUF1_REG); - writeb_relaxed(TXSLEW_VAL_GEN1, miphy_phy->base + TXBUF2_REG); - break; - default: - break; - } - - /* Force Macro1 in partial mode & release pll cal reset */ - writeb_relaxed(RST_RX, miphy_phy->base + RESET_REG); - usleep_range(100, 150); - - miphy365x_set_ssc(miphy_phy, miphy_dev); - - /* Wait for phy_ready */ - ret = miphy365x_rdy(miphy_phy, miphy_dev); - if (ret) - return ret; - - /* - * Enable macro1 to use rx_lspd & tx_lspd - * Release Rx_Clock on first I-DLL phase on macro1 - * Assert deserializer reset - * des_bit_lock_en is set - * bit lock detection strength - * Deassert deserializer reset - */ - writeb_relaxed(0x00, miphy_phy->base + BOUNDARY1_REG); - writeb_relaxed(0x00, miphy_phy->base + IDLL_TEST_REG); - writeb_relaxed(RST_RX, miphy_phy->base + RESET_REG); - val = miphy_phy->sata_tx_pol_inv ? - (TX_POL | DES_BIT_LOCK_EN) : DES_BIT_LOCK_EN; - writeb_relaxed(val, miphy_phy->base + CTRL_REG); - - val = BIT_LOCK_CNT_512 | BIT_LOCK_LEVEL; - writeb_relaxed(val, miphy_phy->base + DES_BITLOCK_REG); - writeb_relaxed(0x00, miphy_phy->base + RESET_REG); - - return 0; -} - -static int miphy365x_init(struct phy *phy) -{ - struct miphy365x_phy *miphy_phy = phy_get_drvdata(phy); - struct miphy365x_dev *miphy_dev = dev_get_drvdata(phy->dev.parent); - int ret = 0; - - mutex_lock(&miphy_dev->miphy_mutex); - - ret = miphy365x_set_path(miphy_phy, miphy_dev); - if (ret) { - mutex_unlock(&miphy_dev->miphy_mutex); - return ret; - } - - /* Initialise Miphy for PCIe or SATA */ - if (miphy_phy->type == PHY_TYPE_PCIE) - ret = miphy365x_init_pcie_port(miphy_phy, miphy_dev); - else - ret = miphy365x_init_sata_port(miphy_phy, miphy_dev); - - mutex_unlock(&miphy_dev->miphy_mutex); - - return ret; -} - -static int miphy365x_get_addr(struct device *dev, - struct miphy365x_phy *miphy_phy, int index) -{ - struct device_node *phynode = miphy_phy->phy->dev.of_node; - const char *name; - int type = miphy_phy->type; - int ret; - - ret = of_property_read_string_index(phynode, "reg-names", index, &name); - if (ret) { - dev_err(dev, "no reg-names property not found\n"); - return ret; - } - - if (!((!strncmp(name, "sata", 4) && type == PHY_TYPE_SATA) || - (!strncmp(name, "pcie", 4) && type == PHY_TYPE_PCIE))) - return 0; - - miphy_phy->base = of_iomap(phynode, index); - if (!miphy_phy->base) { - dev_err(dev, "Failed to map %s\n", phynode->full_name); - return -EINVAL; - } - - return 0; -} - -static struct phy *miphy365x_xlate(struct device *dev, - struct of_phandle_args *args) -{ - struct miphy365x_dev *miphy_dev = dev_get_drvdata(dev); - struct miphy365x_phy *miphy_phy = NULL; - struct device_node *phynode = args->np; - int ret, index; - - if (args->args_count != 1) { - dev_err(dev, "Invalid number of cells in 'phy' property\n"); - return ERR_PTR(-EINVAL); - } - - for (index = 0; index < miphy_dev->nphys; index++) - if (phynode == miphy_dev->phys[index]->phy->dev.of_node) { - miphy_phy = miphy_dev->phys[index]; - break; - } - - if (!miphy_phy) { - dev_err(dev, "Failed to find appropriate phy\n"); - return ERR_PTR(-EINVAL); - } - - miphy_phy->type = args->args[0]; - - if (!(miphy_phy->type == PHY_TYPE_SATA || - miphy_phy->type == PHY_TYPE_PCIE)) { - dev_err(dev, "Unsupported device type: %d\n", miphy_phy->type); - return ERR_PTR(-EINVAL); - } - - /* Each port handles SATA and PCIE - third entry is always sysconf. */ - for (index = 0; index < 3; index++) { - ret = miphy365x_get_addr(dev, miphy_phy, index); - if (ret < 0) - return ERR_PTR(ret); - } - - return miphy_phy->phy; -} - -static const struct phy_ops miphy365x_ops = { - .init = miphy365x_init, - .owner = THIS_MODULE, -}; - -static int miphy365x_of_probe(struct device_node *phynode, - struct miphy365x_phy *miphy_phy) -{ - of_property_read_u32(phynode, "st,sata-gen", &miphy_phy->sata_gen); - if (!miphy_phy->sata_gen) - miphy_phy->sata_gen = SATA_GEN1; - - miphy_phy->pcie_tx_pol_inv = - of_property_read_bool(phynode, "st,pcie-tx-pol-inv"); - - miphy_phy->sata_tx_pol_inv = - of_property_read_bool(phynode, "st,sata-tx-pol-inv"); - - return 0; -} - -static int miphy365x_probe(struct platform_device *pdev) -{ - struct device_node *child, *np = pdev->dev.of_node; - struct miphy365x_dev *miphy_dev; - struct phy_provider *provider; - struct phy *phy; - int ret, port = 0; - - miphy_dev = devm_kzalloc(&pdev->dev, sizeof(*miphy_dev), GFP_KERNEL); - if (!miphy_dev) - return -ENOMEM; - - miphy_dev->nphys = of_get_child_count(np); - miphy_dev->phys = devm_kcalloc(&pdev->dev, miphy_dev->nphys, - sizeof(*miphy_dev->phys), GFP_KERNEL); - if (!miphy_dev->phys) - return -ENOMEM; - - miphy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); - if (IS_ERR(miphy_dev->regmap)) { - dev_err(miphy_dev->dev, "No syscfg phandle specified\n"); - return PTR_ERR(miphy_dev->regmap); - } - - miphy_dev->dev = &pdev->dev; - - dev_set_drvdata(&pdev->dev, miphy_dev); - - mutex_init(&miphy_dev->miphy_mutex); - - for_each_child_of_node(np, child) { - struct miphy365x_phy *miphy_phy; - - miphy_phy = devm_kzalloc(&pdev->dev, sizeof(*miphy_phy), - GFP_KERNEL); - if (!miphy_phy) { - ret = -ENOMEM; - goto put_child; - } - - miphy_dev->phys[port] = miphy_phy; - - phy = devm_phy_create(&pdev->dev, child, &miphy365x_ops); - if (IS_ERR(phy)) { - dev_err(&pdev->dev, "failed to create PHY\n"); - ret = PTR_ERR(phy); - goto put_child; - } - - miphy_dev->phys[port]->phy = phy; - - ret = miphy365x_of_probe(child, miphy_phy); - if (ret) - goto put_child; - - phy_set_drvdata(phy, miphy_dev->phys[port]); - - port++; - /* sysconfig offsets are indexed from 1 */ - ret = of_property_read_u32_index(np, "st,syscfg", port, - &miphy_phy->ctrlreg); - if (ret) { - dev_err(&pdev->dev, "No sysconfig offset found\n"); - goto put_child; - } - } - - provider = devm_of_phy_provider_register(&pdev->dev, miphy365x_xlate); - return PTR_ERR_OR_ZERO(provider); -put_child: - of_node_put(child); - return ret; -} - -static const struct of_device_id miphy365x_of_match[] = { - { .compatible = "st,miphy365x-phy", }, - { }, -}; -MODULE_DEVICE_TABLE(of, miphy365x_of_match); - -static struct platform_driver miphy365x_driver = { - .probe = miphy365x_probe, - .driver = { - .name = "miphy365x-phy", - .of_match_table = miphy365x_of_match, - } -}; -module_platform_driver(miphy365x_driver); - -MODULE_AUTHOR("Alexandre Torgue "); -MODULE_DESCRIPTION("STMicroelectronics miphy365x driver"); -MODULE_LICENSE("GPL v2");