From patchwork Thu Oct 15 19:48:31 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jon Mason X-Patchwork-Id: 55067 Return-Path: X-Original-To: linaro@patches.linaro.org Delivered-To: linaro@patches.linaro.org Received: from mail-lf0-f69.google.com (mail-lf0-f69.google.com [209.85.215.69]) by patches.linaro.org (Postfix) with ESMTPS id EBBC122FFA for ; Thu, 15 Oct 2015 19:49:50 +0000 (UTC) Received: by lffy185 with SMTP id y185sf7726644lff.2 for ; Thu, 15 Oct 2015 12:49:49 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:delivered-to:from:to:cc:subject:date:message-id :in-reply-to:references:mime-version:content-type:sender:precedence :list-id:x-original-sender:x-original-authentication-results :mailing-list:list-post:list-help:list-archive:list-unsubscribe; bh=42Or3m5cXmoDatovFyLTO7NR6v8M2l+n24vCH935vuA=; b=SrWKs86hIlizHElwPTDPQcsqQEQMwFLUVbh6vnP1nTulLT8HjLbtEvUZjmvmS9ek8h fh4TPMm/M5Nxe3a3CWFP9phnEbvM/qPdlWxA8q6tzt7nvAHSQjdJwCrrFnOwvYFpSFY0 Ib/JbpwL9/wTLXc43kUoJfS921dMcLhRmu+WgW2T+T5uixkkEtMVr7mw77lV3BqCcrZg LVr4VLitQmzr1ynEIDEbdATY7fXeZWnTZO5qDMgCaG+BIpb7GVarw+byAagf5I94p650 HayF6hr/70cDWkEVL/k/ljAP93SPUOjUEDTlP0LoN3DMiPaywcdmb3Ci0/d6WuDQCXla ZhdQ== X-Gm-Message-State: ALoCoQnhKeJNiW//7oYFatBQzztp/nq7eGRTl8XFznVuHjS4kty+rbeymAdcCXwRxE17doGzoOQJ X-Received: by 10.112.14.4 with SMTP id l4mr645913lbc.20.1444938589932; Thu, 15 Oct 2015 12:49:49 -0700 (PDT) X-BeenThere: patchwork-forward@linaro.org Received: by 10.25.40.133 with SMTP id o127ls200921lfo.38.gmail; Thu, 15 Oct 2015 12:49:49 -0700 (PDT) X-Received: by 10.25.25.83 with SMTP id 80mr3021092lfz.30.1444938589765; Thu, 15 Oct 2015 12:49:49 -0700 (PDT) Received: from mail-lb0-f182.google.com (mail-lb0-f182.google.com. [209.85.217.182]) by mx.google.com with ESMTPS id ew1si10216629lbc.98.2015.10.15.12.49.49 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Thu, 15 Oct 2015 12:49:49 -0700 (PDT) Received-SPF: pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.217.182 as permitted sender) client-ip=209.85.217.182; Received: by lbcao8 with SMTP id ao8so82384283lbc.3 for ; Thu, 15 Oct 2015 12:49:49 -0700 (PDT) X-Received: by 10.112.17.34 with SMTP id l2mr5723315lbd.117.1444938589603; Thu, 15 Oct 2015 12:49:49 -0700 (PDT) X-Forwarded-To: patchwork-forward@linaro.org X-Forwarded-For: patch@linaro.org patchwork-forward@linaro.org Delivered-To: patch@linaro.org Received: by 10.112.59.35 with SMTP id w3csp828509lbq; Thu, 15 Oct 2015 12:49:48 -0700 (PDT) X-Received: by 10.69.17.1 with SMTP id ga1mr11711759pbd.163.1444938587962; Thu, 15 Oct 2015 12:49:47 -0700 (PDT) Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id zs7si13230767pbc.125.2015.10.15.12.49.45; Thu, 15 Oct 2015 12:49:47 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753645AbbJOTtn (ORCPT + 30 others); Thu, 15 Oct 2015 15:49:43 -0400 Received: from mail-gw3-out.broadcom.com ([216.31.210.64]:28425 "EHLO mail-gw3-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752765AbbJOTst (ORCPT ); Thu, 15 Oct 2015 15:48:49 -0400 X-IronPort-AV: E=Sophos;i="5.17,687,1437462000"; d="scan'208";a="77575793" Received: from irvexchcas08.broadcom.com (HELO IRVEXCHCAS08.corp.ad.broadcom.com) ([10.9.208.57]) by mail-gw3-out.broadcom.com with ESMTP; 15 Oct 2015 13:16:02 -0700 Received: from IRVEXCHSMTP1.corp.ad.broadcom.com (10.9.207.51) by IRVEXCHCAS08.corp.ad.broadcom.com (10.9.208.57) with Microsoft SMTP Server (TLS) id 14.3.235.1; Thu, 15 Oct 2015 12:48:49 -0700 Received: from mail-irva-13.broadcom.com (10.10.10.20) by IRVEXCHSMTP1.corp.ad.broadcom.com (10.9.207.51) with Microsoft SMTP Server id 14.3.235.1; Thu, 15 Oct 2015 12:48:48 -0700 Received: from venom.rtp.broadcom.com (unknown [10.27.64.103]) by mail-irva-13.broadcom.com (Postfix) with ESMTP id 037D240FE6; Thu, 15 Oct 2015 12:45:52 -0700 (PDT) From: Jon Mason To: Michael Turquette , Stephen Boyd CC: Florian Fainelli , Hauke Mehrtens , Ray Jui , Scott Branden , , , , , Subject: [PATCH v3 08/10] clk: ns2: add clock support for Broadcom Northstar 2 SoC Date: Thu, 15 Oct 2015 15:48:31 -0400 Message-ID: <1444938513-10758-9-git-send-email-jonmason@broadcom.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1444938513-10758-1-git-send-email-jonmason@broadcom.com> References: <1444938513-10758-1-git-send-email-jonmason@broadcom.com> MIME-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org Precedence: list List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Removed-Original-Auth: Dkim didn't pass. X-Original-Sender: jonmason@broadcom.com X-Original-Authentication-Results: mx.google.com; spf=pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.217.182 as permitted sender) smtp.mailfrom=patch+caf_=patchwork-forward=linaro.org@linaro.org Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org X-Google-Group-Id: 836684582541 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , The Broadcom Northstar 2 SoC is architected under the iProc architecture. It has the following PLLs: GENPLL SCR, GENPLL SW, LCPLL DDR, LCPLL Ports, all derived from an onboard crystal. Signed-off-by: Jon Mason --- drivers/clk/Makefile | 2 +- drivers/clk/bcm/Makefile | 1 + drivers/clk/bcm/clk-ns2.c | 288 ++++++++++++++++++++++++++++++++++++ include/dt-bindings/clock/bcm-ns2.h | 72 +++++++++ 4 files changed, 362 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/bcm/clk-ns2.c create mode 100644 include/dt-bindings/clock/bcm-ns2.h diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index d08b3e5..6124bd3 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -47,7 +47,7 @@ obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm.o obj-$(CONFIG_COMMON_CLK_AT91) += at91/ -obj-$(CONFIG_ARCH_BCM) += bcm/ +obj-y += bcm/ obj-$(CONFIG_ARCH_BERLIN) += berlin/ obj-$(CONFIG_ARCH_HISI) += hisilicon/ obj-$(CONFIG_ARCH_MXC) += imx/ diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile index e258b28..2d1cbc5 100644 --- a/drivers/clk/bcm/Makefile +++ b/drivers/clk/bcm/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o +obj-$(CONFIG_COMMON_CLK_IPROC) += clk-ns2.o obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o obj-$(CONFIG_ARCH_BCM_5301X) += clk-nsp.o diff --git a/drivers/clk/bcm/clk-ns2.c b/drivers/clk/bcm/clk-ns2.c new file mode 100644 index 0000000..a564e92 --- /dev/null +++ b/drivers/clk/bcm/clk-ns2.c @@ -0,0 +1,288 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include "clk-iproc.h" + +#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, } + +#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \ + .pwr_shift = ps, .iso_shift = is } + +#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \ + .p_reset_shift = prs } + +#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\ + .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \ + .ka_width = kaw } + +#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo } + +#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \ + .hold_shift = hs, .bypass_shift = bs } + +static const struct iproc_pll_ctrl genpll_scr = { + .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL, + .aon = AON_VAL(0x0, 1, 15, 12), + .reset = RESET_VAL(0x4, 2, 1), + .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3), + .ndiv_int = REG_VAL(0x8, 4, 10), + .pdiv = REG_VAL(0x8, 0, 4), + .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc), + .status = REG_VAL(0x0, 27, 1), +}; + + +static const struct iproc_clk_ctrl genpll_scr_clk[] = { + /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined + * in NS2. However, it doesn't appear to be used anywhere, so setting + * it to 0. + */ + [BCM_NS2_GENPLL_SCR_SCR_CLK] = { + .channel = BCM_NS2_GENPLL_SCR_SCR_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 18, 12, 0), + .mdiv = REG_VAL(0x18, 0, 8), + }, + [BCM_NS2_GENPLL_SCR_FS_CLK] = { + .channel = BCM_NS2_GENPLL_SCR_FS_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 19, 13, 0), + .mdiv = REG_VAL(0x18, 8, 8), + }, + [BCM_NS2_GENPLL_SCR_AUDIO_CLK] = { + .channel = BCM_NS2_GENPLL_SCR_AUDIO_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 20, 14, 0), + .mdiv = REG_VAL(0x14, 0, 8), + }, + [BCM_NS2_GENPLL_SCR_CH3_UNUSED] = { + .channel = BCM_NS2_GENPLL_SCR_CH3_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 21, 15, 0), + .mdiv = REG_VAL(0x14, 8, 8), + }, + [BCM_NS2_GENPLL_SCR_CH4_UNUSED] = { + .channel = BCM_NS2_GENPLL_SCR_CH4_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 22, 16, 0), + .mdiv = REG_VAL(0x14, 16, 8), + }, + [BCM_NS2_GENPLL_SCR_CH5_UNUSED] = { + .channel = BCM_NS2_GENPLL_SCR_CH5_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 23, 17, 0), + .mdiv = REG_VAL(0x14, 24, 8), + }, +}; + +static void __init ns2_genpll_scr_clk_init(struct device_node *node) +{ + iproc_pll_clk_setup(node, &genpll_scr, NULL, 0, genpll_scr_clk, + ARRAY_SIZE(genpll_scr_clk)); +} +CLK_OF_DECLARE(ns2_genpll_src_clk, "brcm,ns2-genpll-scr", + ns2_genpll_scr_clk_init); + +static const struct iproc_pll_ctrl genpll_sw = { + .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL, + .aon = AON_VAL(0x0, 2, 9, 8), + .reset = RESET_VAL(0x4, 2, 1), + .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3), + .ndiv_int = REG_VAL(0x8, 4, 10), + .pdiv = REG_VAL(0x8, 0, 4), + .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc), + .status = REG_VAL(0x0, 13, 1), +}; + +static const struct iproc_clk_ctrl genpll_sw_clk[] = { + /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined + * in NS2. However, it doesn't appear to be used anywhere, so setting + * it to 0. + */ + [BCM_NS2_GENPLL_SW_RPE_CLK] = { + .channel = BCM_NS2_GENPLL_SW_RPE_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 18, 12, 0), + .mdiv = REG_VAL(0x18, 0, 8), + }, + [BCM_NS2_GENPLL_SW_250_CLK] = { + .channel = BCM_NS2_GENPLL_SW_250_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 19, 13, 0), + .mdiv = REG_VAL(0x18, 8, 8), + }, + [BCM_NS2_GENPLL_SW_NIC_CLK] = { + .channel = BCM_NS2_GENPLL_SW_NIC_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 20, 14, 0), + .mdiv = REG_VAL(0x14, 0, 8), + }, + [BCM_NS2_GENPLL_SW_CHIMP_CLK] = { + .channel = BCM_NS2_GENPLL_SW_CHIMP_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 21, 15, 0), + .mdiv = REG_VAL(0x14, 8, 8), + }, + [BCM_NS2_GENPLL_SW_PORT_CLK] = { + .channel = BCM_NS2_GENPLL_SW_PORT_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 22, 16, 0), + .mdiv = REG_VAL(0x14, 16, 8), + }, + [BCM_NS2_GENPLL_SW_SDIO_CLK] = { + .channel = BCM_NS2_GENPLL_SW_SDIO_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 23, 17, 0), + .mdiv = REG_VAL(0x14, 24, 8), + }, +}; + +static void __init ns2_genpll_sw_clk_init(struct device_node *node) +{ + iproc_pll_clk_setup(node, &genpll_sw, NULL, 0, genpll_sw_clk, + ARRAY_SIZE(genpll_sw_clk)); +} +CLK_OF_DECLARE(ns2_genpll_sw_clk, "brcm,ns2-genpll-sw", + ns2_genpll_sw_clk_init); + +static const struct iproc_pll_ctrl lcpll_ddr = { + .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL, + .aon = AON_VAL(0x0, 2, 1, 0), + .reset = RESET_VAL(0x4, 2, 1), + .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4), + .ndiv_int = REG_VAL(0x8, 4, 10), + .pdiv = REG_VAL(0x8, 0, 4), + .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc), + .status = REG_VAL(0x0, 0, 1), +}; + +static const struct iproc_clk_ctrl lcpll_ddr_clk[] = { + /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined + * in NS2. However, it doesn't appear to be used anywhere, so setting + * it to 0. + */ + [BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK] = { + .channel = BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 18, 12, 0), + .mdiv = REG_VAL(0x14, 0, 8), + }, + [BCM_NS2_LCPLL_DDR_DDR_CLK] = { + .channel = BCM_NS2_LCPLL_DDR_DDR_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 19, 13, 0), + .mdiv = REG_VAL(0x14, 8, 8), + }, + [BCM_NS2_LCPLL_DDR_CH2_UNUSED] = { + .channel = BCM_NS2_LCPLL_DDR_CH2_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 20, 14, 0), + .mdiv = REG_VAL(0x10, 0, 8), + }, + [BCM_NS2_LCPLL_DDR_CH3_UNUSED] = { + .channel = BCM_NS2_LCPLL_DDR_CH3_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 21, 15, 0), + .mdiv = REG_VAL(0x10, 8, 8), + }, + [BCM_NS2_LCPLL_DDR_CH4_UNUSED] = { + .channel = BCM_NS2_LCPLL_DDR_CH4_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 22, 16, 0), + .mdiv = REG_VAL(0x10, 16, 8), + }, + [BCM_NS2_LCPLL_DDR_CH5_UNUSED] = { + .channel = BCM_NS2_LCPLL_DDR_CH5_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 23, 17, 0), + .mdiv = REG_VAL(0x10, 24, 8), + }, +}; + +static void __init ns2_lcpll_ddr_clk_init(struct device_node *node) +{ + iproc_pll_clk_setup(node, &lcpll_ddr, NULL, 0, lcpll_ddr_clk, + ARRAY_SIZE(lcpll_ddr_clk)); +} +CLK_OF_DECLARE(ns2_lcpll_ddr_clk, "brcm,ns2-lcpll-ddr", + ns2_lcpll_ddr_clk_init); + +static const struct iproc_pll_ctrl lcpll_ports = { + .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL, + .aon = AON_VAL(0x0, 2, 5, 4), + .reset = RESET_VAL(0x4, 2, 1), + .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4), + .ndiv_int = REG_VAL(0x8, 4, 10), + .pdiv = REG_VAL(0x8, 0, 4), + .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc), + .status = REG_VAL(0x0, 0, 1), +}; + +static const struct iproc_clk_ctrl lcpll_ports_clk[] = { + /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined + * in NS2. However, it doesn't appear to be used anywhere, so setting + * it to 0. + */ + [BCM_NS2_LCPLL_PORTS_WAN_CLK] = { + .channel = BCM_NS2_LCPLL_PORTS_WAN_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 18, 12, 0), + .mdiv = REG_VAL(0x14, 0, 8), + }, + [BCM_NS2_LCPLL_PORTS_RGMII_CLK] = { + .channel = BCM_NS2_LCPLL_PORTS_RGMII_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 19, 13, 0), + .mdiv = REG_VAL(0x14, 8, 8), + }, + [BCM_NS2_LCPLL_PORTS_CH2_UNUSED] = { + .channel = BCM_NS2_LCPLL_PORTS_CH2_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 20, 14, 0), + .mdiv = REG_VAL(0x10, 0, 8), + }, + [BCM_NS2_LCPLL_PORTS_CH3_UNUSED] = { + .channel = BCM_NS2_LCPLL_PORTS_CH3_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 21, 15, 0), + .mdiv = REG_VAL(0x10, 8, 8), + }, + [BCM_NS2_LCPLL_PORTS_CH4_UNUSED] = { + .channel = BCM_NS2_LCPLL_PORTS_CH4_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 22, 16, 0), + .mdiv = REG_VAL(0x10, 16, 8), + }, + [BCM_NS2_LCPLL_PORTS_CH5_UNUSED] = { + .channel = BCM_NS2_LCPLL_PORTS_CH5_UNUSED, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 23, 17, 0), + .mdiv = REG_VAL(0x10, 24, 8), + }, +}; + +static void __init ns2_lcpll_ports_clk_init(struct device_node *node) +{ + iproc_pll_clk_setup(node, &lcpll_ports, NULL, 0, lcpll_ports_clk, + ARRAY_SIZE(lcpll_ports_clk)); +} +CLK_OF_DECLARE(ns2_lcpll_ports_clk, "brcm,ns2-lcpll-ports", + ns2_lcpll_ports_clk_init); diff --git a/include/dt-bindings/clock/bcm-ns2.h b/include/dt-bindings/clock/bcm-ns2.h new file mode 100644 index 0000000..d99c7a2 --- /dev/null +++ b/include/dt-bindings/clock/bcm-ns2.h @@ -0,0 +1,72 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _CLOCK_BCM_NS2_H +#define _CLOCK_BCM_NS2_H + +/* GENPLL SCR clock channel ID */ +#define BCM_NS2_GENPLL_SCR 0 +#define BCM_NS2_GENPLL_SCR_SCR_CLK 1 +#define BCM_NS2_GENPLL_SCR_FS_CLK 2 +#define BCM_NS2_GENPLL_SCR_AUDIO_CLK 3 +#define BCM_NS2_GENPLL_SCR_CH3_UNUSED 4 +#define BCM_NS2_GENPLL_SCR_CH4_UNUSED 5 +#define BCM_NS2_GENPLL_SCR_CH5_UNUSED 6 + +/* GENPLL SW clock channel ID */ +#define BCM_NS2_GENPLL_SW 0 +#define BCM_NS2_GENPLL_SW_RPE_CLK 1 +#define BCM_NS2_GENPLL_SW_250_CLK 2 +#define BCM_NS2_GENPLL_SW_NIC_CLK 3 +#define BCM_NS2_GENPLL_SW_CHIMP_CLK 4 +#define BCM_NS2_GENPLL_SW_PORT_CLK 5 +#define BCM_NS2_GENPLL_SW_SDIO_CLK 6 + +/* LCPLL DDR clock channel ID */ +#define BCM_NS2_LCPLL_DDR 0 +#define BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK 1 +#define BCM_NS2_LCPLL_DDR_DDR_CLK 2 +#define BCM_NS2_LCPLL_DDR_CH2_UNUSED 3 +#define BCM_NS2_LCPLL_DDR_CH3_UNUSED 4 +#define BCM_NS2_LCPLL_DDR_CH4_UNUSED 5 +#define BCM_NS2_LCPLL_DDR_CH5_UNUSED 6 + +/* LCPLL PORTS clock channel ID */ +#define BCM_NS2_LCPLL_PORTS 0 +#define BCM_NS2_LCPLL_PORTS_WAN_CLK 1 +#define BCM_NS2_LCPLL_PORTS_RGMII_CLK 2 +#define BCM_NS2_LCPLL_PORTS_CH2_UNUSED 3 +#define BCM_NS2_LCPLL_PORTS_CH3_UNUSED 4 +#define BCM_NS2_LCPLL_PORTS_CH4_UNUSED 5 +#define BCM_NS2_LCPLL_PORTS_CH5_UNUSED 6 + +#endif /* _CLOCK_BCM_NS2_H */