| Message ID | cover.1531895128.git.amit.kucheria@linaro.org |
|---|---|
| Headers | show |
| Series | thermal: tsens: Refactoring for TSENSv2 IP | expand |
Andy, Eduardo: Please consider this a gentle ping to understand how this will get merged. Andy, I guess you'll take the DT patches 2,4 and 7 and the rest will go through Eduardo's thermal tree? Regards, Amit On Wed, Jul 18, 2018 at 12:13 PM, Amit Kucheria <amit.kucheria@linaro.org> wrote: > Here is a repost of the series. There have been no code changes since v6, > just improving comments, patch descriptions, documentation. The series does > the following: > - Some code moves to allow code sharing between different SoCs with v2 of > the TSENS IP, > - a generic qcom,tsens-v2 property as a fallback compatible for all v2.x.y > platforms, > - new platform support (sdm845) > - a cleanup patch and > - a DT change to have a common way to deal with the SROT and TM registers > despite slightly different features across the IP family and different > register offsets. > > Changes since v7: > - Fix couple of typos in spelling > - Add review tags > - Move the DT documentation patch before the code changes > > Changes since v6: > - Fix comments and patch descriptions as per Doug's review > - Rename tsens to thermal-sensor in DT > - Add various review tags > > Changes since v5: > - Actually fix unit addressses for the two tsens blocks as per Stephen's > comment. > > Changes since v4: > - Revert back to a single fallback bindind qcom,tsens-v2 as per Rob's > suggestion. > - Rework how old (unsplit SROT and TM address space) DTs are handled by > needing a 0x1000 offset but still sharing common code in tsens-v2.c > - Remove the patch to added TRDY checks while we investigate Matthias' > reports > - Fix unit addressses for the two tsens blocks as per Stephen's comment. > > Changes since v3: > - Introduce qcom,tsens-v2.4.0 property and make qcom,tsens-v2 a > fallback, compatible property. > - Rename ops_v2 to ops_generic_v2 > > Changes since v2: > > - Based on review, moved tsens-8996.c to tsens-v2.c and changed > corresponding function names, struct names to allow for generic tsensv2 > platforms > - All v2 platforms will now only need to use the qcom,tsen-v2 > property > - Added a DT patch to initialize tsens driver on sdm845, now that > 4.18-rc1 will contain an sdm845.dtsi > > Changes since v1: > - Move get_temp() from tsens-8996 to tsens-common and rename > - Change 8996 DT entry to allow init_common() to work across > sdm845 and 8996 due to different offsets > > Amit Kucheria (7): > thermal: tsens: Get rid of unused fields in structure > dt: thermal: tsens: Document the fallback DT property for v2 of TSENS > IP > thermal: tsens: Add support to split up register address space into > two > arm64: dts: msm8996: thermal: Initialise via DT and add second > controller > thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse > thermal: tsens: Add generic support for TSENS v2 IP > arm64: dts: sdm845: Add tsens nodes > > .../devicetree/bindings/thermal/qcom-tsens.txt | 31 +++++++++++++++++---- > arch/arm64/boot/dts/qcom/msm8996.dtsi | 14 ++++++++-- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 +++++++++++ > drivers/thermal/qcom/Makefile | 2 +- > drivers/thermal/qcom/tsens-common.c | 12 ++++++++ > drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c} | 32 ++++++++++------------ > drivers/thermal/qcom/tsens.c | 3 ++ > drivers/thermal/qcom/tsens.h | 8 ++++-- > 8 files changed, 88 insertions(+), 30 deletions(-) > rename drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c} (64%) > > -- > 2.7.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Here is a repost of the series. There have been no code changes since v6, just improving comments, patch descriptions, documentation. The series does the following: - Some code moves to allow code sharing between different SoCs with v2 of the TSENS IP, - a generic qcom,tsens-v2 property as a fallback compatible for all v2.x.y platforms, - new platform support (sdm845) - a cleanup patch and - a DT change to have a common way to deal with the SROT and TM registers despite slightly different features across the IP family and different register offsets. Changes since v7: - Fix couple of typos in spelling - Add review tags - Move the DT documentation patch before the code changes Changes since v6: - Fix comments and patch descriptions as per Doug's review - Rename tsens to thermal-sensor in DT - Add various review tags Changes since v5: - Actually fix unit addressses for the two tsens blocks as per Stephen's comment. Changes since v4: - Revert back to a single fallback bindind qcom,tsens-v2 as per Rob's suggestion. - Rework how old (unsplit SROT and TM address space) DTs are handled by needing a 0x1000 offset but still sharing common code in tsens-v2.c - Remove the patch to added TRDY checks while we investigate Matthias' reports - Fix unit addressses for the two tsens blocks as per Stephen's comment. Changes since v3: - Introduce qcom,tsens-v2.4.0 property and make qcom,tsens-v2 a fallback, compatible property. - Rename ops_v2 to ops_generic_v2 Changes since v2: - Based on review, moved tsens-8996.c to tsens-v2.c and changed corresponding function names, struct names to allow for generic tsensv2 platforms - All v2 platforms will now only need to use the qcom,tsen-v2 property - Added a DT patch to initialize tsens driver on sdm845, now that 4.18-rc1 will contain an sdm845.dtsi Changes since v1: - Move get_temp() from tsens-8996 to tsens-common and rename - Change 8996 DT entry to allow init_common() to work across sdm845 and 8996 due to different offsets Amit Kucheria (7): thermal: tsens: Get rid of unused fields in structure dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP thermal: tsens: Add support to split up register address space into two arm64: dts: msm8996: thermal: Initialise via DT and add second controller thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse thermal: tsens: Add generic support for TSENS v2 IP arm64: dts: sdm845: Add tsens nodes .../devicetree/bindings/thermal/qcom-tsens.txt | 31 +++++++++++++++++---- arch/arm64/boot/dts/qcom/msm8996.dtsi | 14 ++++++++-- arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 +++++++++++ drivers/thermal/qcom/Makefile | 2 +- drivers/thermal/qcom/tsens-common.c | 12 ++++++++ drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c} | 32 ++++++++++------------ drivers/thermal/qcom/tsens.c | 3 ++ drivers/thermal/qcom/tsens.h | 8 ++++-- 8 files changed, 88 insertions(+), 30 deletions(-) rename drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c} (64%) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html