mbox series

[v3,0/5] Add support for LTC6373

Message ID 20240115133023.3465-1-mitrutzceclan@gmail.com
Headers show
Series Add support for LTC6373 | expand

Message

Dumitru Ceclan Jan. 15, 2024, 1:30 p.m. UTC 
This patch series adds support for the LTC6373 Instrumentation Amplifier within
the existing HMC425A driver.

The LTC6373 is a silicon, 3-bit Fully-Differential digital instrumentation
amplifier that supports the following programmable gains (Vout/Vin):
 G = 0.25, 0.5, 1, 2, 4, 8, 16 + Shutdown.
The programmable interface consists of 3 digitally controled inputs.

V2->V3
 - Use return instead of break in *_gain_dB_to_code()
 - Add new line before return in *_code_to_gain_dB()
 - Match parameter alignment for added _powerdown functions
 - Add precursor patch for using pointers in the match table
 - Add chip_info attributes: has_powerdown and powerdown_val
 - Change probe logic to use has_powerdown for default powerdown state
 - Added 'Fixes' tag to commit message of 'add conditional GPIO array...' 
V1->V2
 Driver:
 - Fix chip info table indent
 - Remove enable attribute
 - Add ext_info powerdown attribute
 - Enable by default powerdown attribute
 - Set default gain after disabling powerdown to min value
 Binding:
 - Fix conditional checking of GPIO array size for LTC6373
 - Add precursor commit for correctly checking gpio size depending upon compatible

Dumitru Ceclan (5):
  dt-bindings: iio: hmc425a: add conditional GPIO array size constraints
  dt-bindings: iio: hmc425a: add entry for LTC6373
  iio: amplifiers: hmc425a: move conversion logic
  iio: amplifiers: hmc425a: use pointers in match table
  iio: amplifiers: hmc425a: add support for LTC6373 Instrumentation
    Amplifier

 .../bindings/iio/amplifiers/adi,hmc425a.yaml  |  47 +++-
 drivers/iio/amplifiers/hmc425a.c              | 253 +++++++++++++-----
 2 files changed, 236 insertions(+), 64 deletions(-)