mbox series

[v2,0/4] arm64: rockchip: Pine64 pinetab2 support

Message ID 20231223-pinetab2-v2-0-ec1856d0030e@mecka.net
Headers show
Series arm64: rockchip: Pine64 pinetab2 support | expand

Message

Manuel Traut Dec. 23, 2023, 3:20 p.m. UTC
This adds support for the BOE TH101MB31IG002 LCD Panel used in Pinetab2 [1] and
Pinetab-V [2] as well as the devictrees for the Pinetab2 v0.1 and v2.0.

The BOE LCD Panel patch was retrieved from [3]. The function-name prefix has
been adapted and the LCD init section was simplified.

The Pinetab2 devicetree patch was retrieved from [4]. Some renaming was needed
to pass the dtb-checks, the brightness-levels are specified as range and steps
instead of a list of values.

[5] was also used as source for this queue.

The last to patches fix some dtb-checker warnings that showed up with the new
device-trees.

[1] https://wiki.pine64.org/wiki/PineTab2
[2] https://wiki.pine64.org/wiki/PineTab-V
[3] https://salsa.debian.org/Mobian-team/devices/kernels/rockchip-linux/-/blob/mobian-6.6/debian/patches/display/0018-drm-panel-add-BOE-TH101MB31IG002-28A-driver.patch?ref_type=heads
[4] https://salsa.debian.org/Mobian-team/devices/kernels/rockchip-linux/-/blob/mobian-6.6/debian/patches/device-tree/0134-arch-arm64-add-Pine64-PineTab2-device-trees.patch?ref_type=heads
[5] https://github.com/dreemurrs-embedded/linux-pinetab2/tree/v6.6.7-danctnix1

Signed-off-by: Manuel Traut <manut@mecka.net>
---
Changes in v2:
- Removed dtb-checker fixups, cause I am not sure if they are correct
- Applied review comments for dt bindings
- pinetab2 dts:
    * Remove unverified WLAN entries, as in [5]
    * Simplify flash LED definition, as in [5]
    * Fix headphone detection and sound routing, as in [5]
    * Fix CRU clock configuration
- BOE TH101MB31IG002 LCD Panel:
    * Reworked prepare/enable unprepare/disable, as in [5]
- Replaced nicknames by realnames in author and signed-offs

- Link to v1: https://lore.kernel.org/r/20231222-pinetab2-v1-0-e148a7f61bd1@mecka.net

---
Alexander Warnecke (2):
      drm/panel: Add driver for BOE TH101MB31IG002-28A panel
      arm64: dts: rockchip: Add devicetree for Pine64 Pinetab2

Manuel Traut (2):
      dt-bindings: display: panel: Add BOE TH101MB31IG002-28A panel
      dt-bindings: arm64: rockchip: Add Pine64 Pinetab2

 .../devicetree/bindings/arm/rockchip.yaml          |   8 +
 .../display/panel/boe,th101mb31ig002-28a.yaml      |  58 ++
 arch/arm64/boot/dts/rockchip/Makefile              |   2 +
 .../boot/dts/rockchip/rk3566-pinetab2-v0.1.dts     |  26 +
 .../boot/dts/rockchip/rk3566-pinetab2-v2.0.dts     |  46 +
 arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi  | 979 +++++++++++++++++++++
 drivers/gpu/drm/panel/Kconfig                      |  11 +
 drivers/gpu/drm/panel/Makefile                     |   1 +
 .../gpu/drm/panel/panel-boe-th101mb31ig002-28a.c   | 348 ++++++++
 9 files changed, 1479 insertions(+)
---
base-commit: 5254c0cbc92d2a08e75443bdb914f1c4839cdf5a
change-id: 20231222-pinetab2-faa77e01db6f

Best regards,

Comments

Krzysztof Kozlowski Dec. 23, 2023, 6:32 p.m. UTC | #1
On 23/12/2023 16:20, Manuel Traut wrote:
> Add bindings for the BOE TH101MB31IG002-28A LCD panel. It is
> used e.g. in the Pine64 Pinetab2 and PinetabV.
> 
> Signed-off-by: Manuel Traut <manut@mecka.net>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof