mbox series

[v2,0/7] arm64: dts: imx8qxp add emda support

Message ID 20230925204913.3776656-1-Frank.Li@nxp.com
Headers show
Series arm64: dts: imx8qxp add emda support | expand

Message

Frank Li Sept. 25, 2023, 8:49 p.m. UTC
eDMAv3 patch was accepted.
https://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git/log/?h=next

This is dts parts.

Add 8qxp edma support and enable lpuart1..3 dma support.

Change from v1 to v2
- rebase scu-pd.c to 6.6rc1
- change "F" to "f"
- Add 8qm edma dts change.
- Add lpuart0 dma setting (console tty will disable dma)

Frank Li (7):
  genpd: imx: scu-pd: fixed dma2-ch domain defination
  arm64: dts: imx8: add edma[0..3]
  arm64: dts: imx8: add edma for uart[0..3]
  arm64: dts: imx8qm: Update edma channel for uart[0..3]
  arm64: dts: imx8: update lpuart[0..3] irq number
  arm64: dts: imx8qxp-mek: enable 8qxp lpuart2 and lpuart3
  arm64: dts: imx8qm-mek: enable 8qm lpuart2 and lpuart3

 .../boot/dts/freescale/imx8-ss-audio.dtsi     | 88 +++++++++++++++++++
 .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 78 +++++++++++++++-
 .../boot/dts/freescale/imx8dxl-ss-adma.dtsi   | 30 +++++++
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts  | 26 ++++++
 .../boot/dts/freescale/imx8qm-ss-dma.dtsi     | 56 ++++++++++++
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 26 ++++++
 drivers/genpd/imx/scu-pd.c                    |  3 +-
 7 files changed, 302 insertions(+), 5 deletions(-)

Comments

Shawn Guo Oct. 9, 2023, 1:28 p.m. UTC | #1
On Mon, Sep 25, 2023 at 04:49:06PM -0400, Frank Li wrote:
> eDMAv3 patch was accepted.
> https://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git/log/?h=next
> 
> This is dts parts.
> 
> Add 8qxp edma support and enable lpuart1..3 dma support.
> 
> Change from v1 to v2
> - rebase scu-pd.c to 6.6rc1
> - change "F" to "f"
> - Add 8qm edma dts change.
> - Add lpuart0 dma setting (console tty will disable dma)
> 
> Frank Li (7):
>   genpd: imx: scu-pd: fixed dma2-ch domain defination
>   arm64: dts: imx8: add edma[0..3]
>   arm64: dts: imx8: add edma for uart[0..3]
>   arm64: dts: imx8qm: Update edma channel for uart[0..3]
>   arm64: dts: imx8: update lpuart[0..3] irq number
>   arm64: dts: imx8qxp-mek: enable 8qxp lpuart2 and lpuart3
>   arm64: dts: imx8qm-mek: enable 8qm lpuart2 and lpuart3

Applied 2/7 ~ 7/7, thanks!