mbox series

[v8,0/3] dwc general suspend/resume functionality

Message ID 20230803150409.271155-1-Frank.Li@nxp.com
Headers show
Series dwc general suspend/resume functionality | expand

Message

Frank Li Aug. 3, 2023, 3:04 p.m. UTC
Add a API for dwc suspend/resume.
In layerscape platform call this api.

Change log
 - Change from v7 to v8
   Add new patch to add common PCIE_PME_TO_L2_TIMEOUT_US define.
   timeout value using PCIE_PME_TO_L2_TIMEOUT_US.

 - Chnage from v6 to v7
   Remove local varible struct dw_pcie *pci = pcie->pci
   Change according to Manivannan's feedback
     remove unused lut_off and lut_base
     fixed  100 to 1000(for 1ms)
     using dev_err for timeout
     refine commit message
     fix sleep value 100 (should be 1000 for 1ms).
     use dev_err when timeout

 - Change from v5 to v6
   change to NOIRQ_SYSTEM_SLEEP_PM_OPS to remove #ifdef PM_CONFIG
   refine commit message
   change according to Manivannan's comments.
     remove reduncate step dw_pcie_set_dstate()
     return 0 when .pme_turn_off is zero
     call host_deinit() in suspend
     check .host_deinit and .host_init point before call.

 - Change from v4 to v5
   Closes: https://lore.kernel.org/oe-kbuild-all/202307211904.zExw4Q8H-lkp@intel.com/

 - Change from v3 to v4
   change according to Manivannan's comments.

 - change at v2 to v3
   Basic rewrite whole patch according rob herry suggestion.
   put common function into dwc, so more soc can share the same logic.

Frank Li (2):
  PCI: Add macro PCIE_PME_TO_L2_TIMEOUT_US
  PCI: dwc: Implement general suspend/resume functionality for L2/L3
    transitions

Hou Zhiqiang (1):
  PCI: layerscape: Add power management support for ls1028a

 drivers/pci/controller/dwc/pci-layerscape.c   | 129 ++++++++++++++++--
 .../pci/controller/dwc/pcie-designware-host.c |  75 ++++++++++
 drivers/pci/controller/dwc/pcie-designware.h  |  28 ++++
 drivers/pci/pci.h                             |   6 +
 4 files changed, 229 insertions(+), 9 deletions(-)