Message ID | 20230719102057.22329-1-minda.chen@starfivetech.com |
---|---|
Headers | show |
Series | Refactoring Microchip PolarFire PCIe driver | expand |
Hey Minda, On Wed, Jul 19, 2023 at 06:20:52PM +0800, Minda Chen wrote: > Move Microchip specific platform codes to PLDA directory. > Including clock init, interrupt event handle and platform > init codes. > > Signed-off-by: Minda Chen <minda.chen@starfivetech.com> > --- > MAINTAINERS | 4 +- > drivers/pci/controller/Kconfig | 8 - > drivers/pci/controller/Makefile | 1 - > drivers/pci/controller/plda/Kconfig | 10 +- > drivers/pci/controller/plda/Makefile | 1 + > .../{ => plda}/pcie-microchip-host.c | 594 ++---------------- I think that you should squash this with the previous patch, rather than duplicate the code and then de-duplicate it, so that it is more obvious what is being extracted. > 6 files changed, 55 insertions(+), 563 deletions(-) > rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (50%) > > diff --git a/MAINTAINERS b/MAINTAINERS > index 3b3c4d8808ae..f02618c2bdf5 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -16503,7 +16503,7 @@ M: Daire McNamara <daire.mcnamara@microchip.com> > L: linux-pci@vger.kernel.org > S: Supported > F: Documentation/devicetree/bindings/pci/microchip* > -F: drivers/pci/controller/*microchip* > +F: drivers/pci/controller/plda/*microchip* > > PCIE DRIVER FOR QUALCOMM MSM > M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > @@ -18287,7 +18287,7 @@ F: drivers/char/hw_random/mpfs-rng.c > F: drivers/clk/microchip/clk-mpfs*.c > F: drivers/i2c/busses/i2c-microchip-corei2c.c > F: drivers/mailbox/mailbox-mpfs.c > -F: drivers/pci/controller/pcie-microchip-host.c > +F: drivers/pci/controller/plda/pcie-microchip-host.c > F: drivers/pwm/pwm-microchip-core.c > F: drivers/reset/reset-mpfs.c > F: drivers/rtc/rtc-mpfs.c > diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig > index a106dabcb8dc..107cdb69e15c 100644 > --- a/drivers/pci/controller/Kconfig > +++ b/drivers/pci/controller/Kconfig > @@ -216,14 +216,6 @@ config PCIE_MT7621 > help > This selects a driver for the MediaTek MT7621 PCIe Controller. > > -config PCIE_MICROCHIP_HOST > - bool "Microchip AXI PCIe controller" > - depends on PCI_MSI && OF > - select PCI_HOST_COMMON > - help > - Say Y here if you want kernel to support the Microchip AXI PCIe > - Host Bridge driver. > - > config PCI_HYPERV_INTERFACE > tristate "Microsoft Hyper-V PCI Interface" > depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI > diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile > index aa0a691ebcbc..93236dc97b21 100644 > --- a/drivers/pci/controller/Makefile > +++ b/drivers/pci/controller/Makefile > @@ -32,7 +32,6 @@ obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o > obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o > obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o > obj-$(CONFIG_PCIE_MEDIATEK_GEN3) += pcie-mediatek-gen3.o > -obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o > obj-$(CONFIG_VMD) += vmd.o > obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o > obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o > diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig > index 37e17326671b..fb274976b84b 100644 > --- a/drivers/pci/controller/plda/Kconfig > +++ b/drivers/pci/controller/plda/Kconfig > @@ -4,8 +4,16 @@ menu "PLDA PCIe controllers support" > depends on PCI > > config PCIE_PLDA_HOST > - bool "PLDA PCIe host controller" > + bool > depends on OF && PCI_MSI Is this okay w.r.t. unmet dependencies? IOW, if PCI_MSI is disabled, PCIE_MICROCHIP_HOST can still select PCIE_PLDA_HOST, no? > select IRQ_DOMAIN > > +config PCIE_MICROCHIP_HOST > + bool "Microchip AXI PCIe controller" > + select PCI_HOST_COMMON > + select PCIE_PLDA_HOST > + help > + Say Y here if you want kernel to support the Microchip AXI PCIe > + Host Bridge driver. > + > endmenu > diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile > index 79dbae655c2b..4340ab007f44 100644 > --- a/drivers/pci/controller/plda/Makefile > +++ b/drivers/pci/controller/plda/Makefile > @@ -1,2 +1,3 @@ > # SPDX-License-Identifier: GPL-2.0 > obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o > +obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o