Message ID | 20230705195356.866774-1-jm@ti.com |
---|---|
Headers | show |
Series | Enable multiple MCAN on AM62x | expand |
On 05.07.2023 14:53:56, Judith Mendez wrote: > Introduce timer polling method to MCAN since some SoCs may not > have M_CAN interrupt routed to A53 Linux and do not have > interrupt property in device tree M_CAN node. > > On AM62x SoC, MCANs on MCU domain do not have hardware interrupt > routed to A53 Linux, instead they will use timer polling method. > > Add an hrtimer to MCAN class device. Each MCAN will have its own > hrtimer instantiated if there is no hardware interrupt found in > device tree M_CAN node. The timer will generate a software > interrupt every 1 ms. In hrtimer callback, we check if there is > a transaction pending by reading a register, then process by > calling the isr if there is. > > Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Verdin AM62 > Reviewed-by: Tony Lindgren <tony@atomide.com> > Signed-off-by: Judith Mendez <jm@ti.com> > --- > Changelog: > v9: > - Change add MS to HRTIMER_POLL_INTERVAL > - Change syntax from "= 0" to "!" > v8: > - Cancel hrtimer after interrupts in m_can_stop > - Move assignment of hrtimer_callback to m_can_class_register() > - Initialize irq = 0 if polling mode is used This change has been lost :( > - Add reson for polling mode in commit msg > - Remove unrelated change > - Remove polling flag > v7: > - Clean up m_can_platform.c if/else section after removing poll-interval > - Remove poll-interval from patch description > v6: > - Move hrtimer stop/start function calls to m_can_open and m_can_close to > support power suspend/resume > v5: > - Change dev_dbg to dev_info if hardware interrupt exists and polling > is enabled > v4: > - No changes > v3: > - Create a define for 1 ms polling interval > - Change plarform_get_irq to optional to not print error msg > v2: > - Add functionality to check for 'poll-interval' property in MCAN node > - Add 'polling' flag in driver to check if device is using polling method > - Check for timer polling and hardware interrupt cases, default to > hardware interrupt method > - Change ns_to_ktime() to ms_to_ktime() > --- > drivers/net/can/m_can/m_can.c | 32 +++++++++++++++++++++++++- > drivers/net/can/m_can/m_can.h | 3 +++ > drivers/net/can/m_can/m_can_platform.c | 23 +++++++++++++++--- > 3 files changed, 54 insertions(+), 4 deletions(-) > > diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c > index c5af92bcc9c9..13fd84b2e2dd 100644 > --- a/drivers/net/can/m_can/m_can.c > +++ b/drivers/net/can/m_can/m_can.c > @@ -11,6 +11,7 @@ > #include <linux/bitfield.h> > #include <linux/can/dev.h> > #include <linux/ethtool.h> > +#include <linux/hrtimer.h> > #include <linux/interrupt.h> > #include <linux/io.h> > #include <linux/iopoll.h> > @@ -308,6 +309,9 @@ enum m_can_reg { > #define TX_EVENT_MM_MASK GENMASK(31, 24) > #define TX_EVENT_TXTS_MASK GENMASK(15, 0) > > +/* Hrtimer polling interval */ > +#define HRTIMER_POLL_INTERVAL_MS 1 > + > /* The ID and DLC registers are adjacent in M_CAN FIFO memory, > * and we can save a (potentially slow) bus round trip by combining > * reads and writes to them. > @@ -1414,6 +1418,12 @@ static int m_can_start(struct net_device *dev) > > m_can_enable_all_interrupts(cdev); > > + if (!dev->irq) { > + dev_dbg(cdev->dev, "Start hrtimer\n"); > + hrtimer_start(&cdev->hrtimer, ms_to_ktime(HRTIMER_POLL_INTERVAL_MS), > + HRTIMER_MODE_REL_PINNED); > + } > + > return 0; > } > > @@ -1568,6 +1578,11 @@ static void m_can_stop(struct net_device *dev) > { > struct m_can_classdev *cdev = netdev_priv(dev); > > + if (!dev->irq) { > + dev_dbg(cdev->dev, "Stop hrtimer\n"); > + hrtimer_cancel(&cdev->hrtimer); > + } > + > /* disable all interrupts */ > m_can_disable_all_interrupts(cdev); > > @@ -1793,6 +1808,18 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb, > return NETDEV_TX_OK; > } > > +static enum hrtimer_restart hrtimer_callback(struct hrtimer *timer) > +{ > + struct m_can_classdev *cdev = container_of(timer, struct > + m_can_classdev, hrtimer); > + > + m_can_isr(0, cdev->net); > + > + hrtimer_forward_now(timer, ms_to_ktime(HRTIMER_POLL_INTERVAL_MS)); > + > + return HRTIMER_RESTART; > +} > + > static int m_can_open(struct net_device *dev) > { > struct m_can_classdev *cdev = netdev_priv(dev); > @@ -1831,7 +1858,7 @@ static int m_can_open(struct net_device *dev) > err = request_threaded_irq(dev->irq, NULL, m_can_isr, > IRQF_ONESHOT, > dev->name, dev); > - } else { > + } else if (dev->irq) { > err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name, > dev); > } > @@ -2027,6 +2054,9 @@ int m_can_class_register(struct m_can_classdev *cdev) > goto clk_disable; > } > > + if (!cdev->net->irq) > + cdev->hrtimer.function = &hrtimer_callback; > + > ret = m_can_dev_setup(cdev); > if (ret) > goto rx_offload_del; > diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h > index a839dc71dc9b..2ac18ac867a4 100644 > --- a/drivers/net/can/m_can/m_can.h > +++ b/drivers/net/can/m_can/m_can.h > @@ -15,6 +15,7 @@ > #include <linux/device.h> > #include <linux/dma-mapping.h> > #include <linux/freezer.h> > +#include <linux/hrtimer.h> > #include <linux/interrupt.h> > #include <linux/io.h> > #include <linux/iopoll.h> > @@ -93,6 +94,8 @@ struct m_can_classdev { > int is_peripheral; > > struct mram_cfg mcfg[MRAM_CFG_NUM]; > + > + struct hrtimer hrtimer; > }; > > struct m_can_classdev *m_can_class_allocate_dev(struct device *dev, int sizeof_priv); > diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c > index 94dc82644113..76d11ce38220 100644 > --- a/drivers/net/can/m_can/m_can_platform.c > +++ b/drivers/net/can/m_can/m_can_platform.c > @@ -5,6 +5,7 @@ > // > // Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/ > > +#include <linux/hrtimer.h> > #include <linux/phy/phy.h> > #include <linux/platform_device.h> > > @@ -96,12 +97,28 @@ static int m_can_plat_probe(struct platform_device *pdev) > goto probe_fail; Please set "irq" to 0 during declaration. > > addr = devm_platform_ioremap_resource_byname(pdev, "m_can"); > - irq = platform_get_irq_byname(pdev, "int0"); > - if (IS_ERR(addr) || irq < 0) { > - ret = -EINVAL; > + if (IS_ERR(addr)) { > + ret = PTR_ERR(addr); > goto probe_fail; > } > > + if (device_property_present(mcan_class->dev, "interrupts") || > + device_property_present(mcan_class->dev, "interrupt-names")) { > + irq = platform_get_irq_byname(pdev, "int0"); > + if (irq == -EPROBE_DEFER) { > + ret = -EPROBE_DEFER; > + goto probe_fail; > + } > + if (irq < 0) { > + ret = -EINVAL; Please return the original error value. > + goto probe_fail; > + } > + } else { > + dev_dbg(mcan_class->dev, "Polling enabled, initialize hrtimer"); > + hrtimer_init(&mcan_class->hrtimer, CLOCK_MONOTONIC, > + HRTIMER_MODE_REL_PINNED); > + } > + > /* message ram could be shared */ > res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram"); > if (!res) { > -- > 2.34.1 > > Marc
Hi Marc On 7/6/23 2:25 AM, Marc Kleine-Budde wrote: > On 05.07.2023 14:53:56, Judith Mendez wrote: >> Introduce timer polling method to MCAN since some SoCs may not >> have M_CAN interrupt routed to A53 Linux and do not have >> interrupt property in device tree M_CAN node. >> >> On AM62x SoC, MCANs on MCU domain do not have hardware interrupt >> routed to A53 Linux, instead they will use timer polling method. >> >> Add an hrtimer to MCAN class device. Each MCAN will have its own >> hrtimer instantiated if there is no hardware interrupt found in >> device tree M_CAN node. The timer will generate a software >> interrupt every 1 ms. In hrtimer callback, we check if there is >> a transaction pending by reading a register, then process by >> calling the isr if there is. >> >> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Verdin AM62 >> Reviewed-by: Tony Lindgren <tony@atomide.com> >> Signed-off-by: Judith Mendez <jm@ti.com> >> --- >> Changelog: >> v9: >> - Change add MS to HRTIMER_POLL_INTERVAL >> - Change syntax from "= 0" to "!" >> v8: >> - Cancel hrtimer after interrupts in m_can_stop >> - Move assignment of hrtimer_callback to m_can_class_register() >> - Initialize irq = 0 if polling mode is used > > This change has been lost :( True > >> - Add reson for polling mode in commit msg >> - Remove unrelated change >> - Remove polling flag >> v7: >> - Clean up m_can_platform.c if/else section after removing poll-interval >> - Remove poll-interval from patch description >> v6: >> - Move hrtimer stop/start function calls to m_can_open and m_can_close to >> support power suspend/resume >> v5: >> - Change dev_dbg to dev_info if hardware interrupt exists and polling >> is enabled >> v4: >> - No changes >> v3: >> - Create a define for 1 ms polling interval >> - Change plarform_get_irq to optional to not print error msg >> v2: >> - Add functionality to check for 'poll-interval' property in MCAN node >> - Add 'polling' flag in driver to check if device is using polling method >> - Check for timer polling and hardware interrupt cases, default to >> hardware interrupt method >> - Change ns_to_ktime() to ms_to_ktime() >> --- >> drivers/net/can/m_can/m_can.c | 32 +++++++++++++++++++++++++- >> drivers/net/can/m_can/m_can.h | 3 +++ >> drivers/net/can/m_can/m_can_platform.c | 23 +++++++++++++++--- >> 3 files changed, 54 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c >> index c5af92bcc9c9..13fd84b2e2dd 100644 >> --- a/drivers/net/can/m_can/m_can.c >> +++ b/drivers/net/can/m_can/m_can.c >> @@ -11,6 +11,7 @@ >> #include <linux/bitfield.h> >> #include <linux/can/dev.h> >> #include <linux/ethtool.h> >> +#include <linux/hrtimer.h> >> #include <linux/interrupt.h> >> #include <linux/io.h> >> #include <linux/iopoll.h> >> @@ -308,6 +309,9 @@ enum m_can_reg { >> #define TX_EVENT_MM_MASK GENMASK(31, 24) >> #define TX_EVENT_TXTS_MASK GENMASK(15, 0) >> >> +/* Hrtimer polling interval */ >> +#define HRTIMER_POLL_INTERVAL_MS 1 >> + >> /* The ID and DLC registers are adjacent in M_CAN FIFO memory, >> * and we can save a (potentially slow) bus round trip by combining >> * reads and writes to them. >> @@ -1414,6 +1418,12 @@ static int m_can_start(struct net_device *dev) >> >> m_can_enable_all_interrupts(cdev); >> >> + if (!dev->irq) { >> + dev_dbg(cdev->dev, "Start hrtimer\n"); >> + hrtimer_start(&cdev->hrtimer, ms_to_ktime(HRTIMER_POLL_INTERVAL_MS), >> + HRTIMER_MODE_REL_PINNED); >> + } >> + >> return 0; >> } >> >> @@ -1568,6 +1578,11 @@ static void m_can_stop(struct net_device *dev) >> { >> struct m_can_classdev *cdev = netdev_priv(dev); >> >> + if (!dev->irq) { >> + dev_dbg(cdev->dev, "Stop hrtimer\n"); >> + hrtimer_cancel(&cdev->hrtimer); >> + } >> + >> /* disable all interrupts */ >> m_can_disable_all_interrupts(cdev); >> >> @@ -1793,6 +1808,18 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb, >> return NETDEV_TX_OK; >> } >> >> +static enum hrtimer_restart hrtimer_callback(struct hrtimer *timer) >> +{ >> + struct m_can_classdev *cdev = container_of(timer, struct >> + m_can_classdev, hrtimer); >> + >> + m_can_isr(0, cdev->net); >> + >> + hrtimer_forward_now(timer, ms_to_ktime(HRTIMER_POLL_INTERVAL_MS)); >> + >> + return HRTIMER_RESTART; >> +} >> + >> static int m_can_open(struct net_device *dev) >> { >> struct m_can_classdev *cdev = netdev_priv(dev); >> @@ -1831,7 +1858,7 @@ static int m_can_open(struct net_device *dev) >> err = request_threaded_irq(dev->irq, NULL, m_can_isr, >> IRQF_ONESHOT, >> dev->name, dev); >> - } else { >> + } else if (dev->irq) { >> err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name, >> dev); >> } >> @@ -2027,6 +2054,9 @@ int m_can_class_register(struct m_can_classdev *cdev) >> goto clk_disable; >> } >> >> + if (!cdev->net->irq) >> + cdev->hrtimer.function = &hrtimer_callback; >> + >> ret = m_can_dev_setup(cdev); >> if (ret) >> goto rx_offload_del; >> diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h >> index a839dc71dc9b..2ac18ac867a4 100644 >> --- a/drivers/net/can/m_can/m_can.h >> +++ b/drivers/net/can/m_can/m_can.h >> @@ -15,6 +15,7 @@ >> #include <linux/device.h> >> #include <linux/dma-mapping.h> >> #include <linux/freezer.h> >> +#include <linux/hrtimer.h> >> #include <linux/interrupt.h> >> #include <linux/io.h> >> #include <linux/iopoll.h> >> @@ -93,6 +94,8 @@ struct m_can_classdev { >> int is_peripheral; >> >> struct mram_cfg mcfg[MRAM_CFG_NUM]; >> + >> + struct hrtimer hrtimer; >> }; >> >> struct m_can_classdev *m_can_class_allocate_dev(struct device *dev, int sizeof_priv); >> diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c >> index 94dc82644113..76d11ce38220 100644 >> --- a/drivers/net/can/m_can/m_can_platform.c >> +++ b/drivers/net/can/m_can/m_can_platform.c >> @@ -5,6 +5,7 @@ >> // >> // Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/ >> >> +#include <linux/hrtimer.h> >> #include <linux/phy/phy.h> >> #include <linux/platform_device.h> >> >> @@ -96,12 +97,28 @@ static int m_can_plat_probe(struct platform_device *pdev) >> goto probe_fail; > > Please set "irq" to 0 during declaration. During declaration of irq, it is already set to 0: int irq, ret = 0; > >> >> addr = devm_platform_ioremap_resource_byname(pdev, "m_can"); >> - irq = platform_get_irq_byname(pdev, "int0"); >> - if (IS_ERR(addr) || irq < 0) { >> - ret = -EINVAL; >> + if (IS_ERR(addr)) { >> + ret = PTR_ERR(addr); >> goto probe_fail; >> } >> >> + if (device_property_present(mcan_class->dev, "interrupts") || >> + device_property_present(mcan_class->dev, "interrupt-names")) { >> + irq = platform_get_irq_byname(pdev, "int0"); >> + if (irq == -EPROBE_DEFER) { >> + ret = -EPROBE_DEFER; >> + goto probe_fail; >> + } >> + if (irq < 0) { >> + ret = -EINVAL; > > Please return the original error value. The original value returned is -EINVAL: - if (IS_ERR(addr) || irq < 0) { - ret = -EINVAL; Perhaps I am missing something here? > >> + goto probe_fail; >> + } >> + } else { >> + dev_dbg(mcan_class->dev, "Polling enabled, initialize hrtimer"); >> + hrtimer_init(&mcan_class->hrtimer, CLOCK_MONOTONIC, >> + HRTIMER_MODE_REL_PINNED); >> + } >> + >> /* message ram could be shared */ >> res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram"); >> if (!res) { >> -- >> 2.34.1 Judith
On Thu, Jul 06, 2023 at 10:20:59AM -0500, Judith Mendez wrote: > Hi Marc > > On 7/6/23 2:25 AM, Marc Kleine-Budde wrote: > > On 05.07.2023 14:53:56, Judith Mendez wrote: > > > Introduce timer polling method to MCAN since some SoCs may not > > > have M_CAN interrupt routed to A53 Linux and do not have > > > interrupt property in device tree M_CAN node. > > > > > > On AM62x SoC, MCANs on MCU domain do not have hardware interrupt > > > routed to A53 Linux, instead they will use timer polling method. > > > > > > Add an hrtimer to MCAN class device. Each MCAN will have its own > > > hrtimer instantiated if there is no hardware interrupt found in > > > device tree M_CAN node. The timer will generate a software > > > interrupt every 1 ms. In hrtimer callback, we check if there is > > > a transaction pending by reading a register, then process by > > > calling the isr if there is. > > > > > > Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Verdin AM62 > > > Reviewed-by: Tony Lindgren <tony@atomide.com> > > > Signed-off-by: Judith Mendez <jm@ti.com> > > > --- ... > > > diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c > > > index 94dc82644113..76d11ce38220 100644 > > > --- a/drivers/net/can/m_can/m_can_platform.c > > > +++ b/drivers/net/can/m_can/m_can_platform.c > > > @@ -5,6 +5,7 @@ > > > // > > > // Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/ > > > +#include <linux/hrtimer.h> > > > #include <linux/phy/phy.h> > > > #include <linux/platform_device.h> > > > @@ -96,12 +97,28 @@ static int m_can_plat_probe(struct platform_device *pdev) > > > goto probe_fail; > > > > Please set "irq" to 0 during declaration. > > During declaration of irq, it is already set to 0: > > int irq, ret = 0; The initialization here applies only to ret. int irq = 0, ret = 0; > > > addr = devm_platform_ioremap_resource_byname(pdev, "m_can"); > > > - irq = platform_get_irq_byname(pdev, "int0"); > > > - if (IS_ERR(addr) || irq < 0) { > > > - ret = -EINVAL; > > > + if (IS_ERR(addr)) { > > > + ret = PTR_ERR(addr); > > > goto probe_fail; > > > } > > > + if (device_property_present(mcan_class->dev, "interrupts") || > > > + device_property_present(mcan_class->dev, "interrupt-names")) { > > > + irq = platform_get_irq_byname(pdev, "int0"); > > > + if (irq == -EPROBE_DEFER) { > > > + ret = -EPROBE_DEFER; > > > + goto probe_fail; > > > + } > > > + if (irq < 0) { > > > + ret = -EINVAL; > > > > Please return the original error value. > > The original value returned is -EINVAL: > > - if (IS_ERR(addr) || irq < 0) { > - ret = -EINVAL; > > Perhaps I am missing something here? if (irq < 0) { ret = irq; ... } And you can also get rid of the explicit test for -EPROBE_DEFER this way simplifying the code. Francesco
On Wed, Jul 05, 2023 at 02:53:54PM -0500, Judith Mendez wrote: > v9: > - Change add MS to HRTIMER_POLL_INTERVAL > - Change syntax from "= 0" to "!" Please add the series version to the mail subject, you did it up to v8, and you forgot now. Thanks! Francesco
Hi, On 7/6/23 3:21 PM, Francesco Dolcini wrote: > On Thu, Jul 06, 2023 at 10:20:59AM -0500, Judith Mendez wrote: >> Hi Marc >> >> On 7/6/23 2:25 AM, Marc Kleine-Budde wrote: >>> On 05.07.2023 14:53:56, Judith Mendez wrote: >>>> Introduce timer polling method to MCAN since some SoCs may not >>>> have M_CAN interrupt routed to A53 Linux and do not have >>>> interrupt property in device tree M_CAN node. >>>> >>>> On AM62x SoC, MCANs on MCU domain do not have hardware interrupt >>>> routed to A53 Linux, instead they will use timer polling method. >>>> >>>> Add an hrtimer to MCAN class device. Each MCAN will have its own >>>> hrtimer instantiated if there is no hardware interrupt found in >>>> device tree M_CAN node. The timer will generate a software >>>> interrupt every 1 ms. In hrtimer callback, we check if there is >>>> a transaction pending by reading a register, then process by >>>> calling the isr if there is. >>>> >>>> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Verdin AM62 >>>> Reviewed-by: Tony Lindgren <tony@atomide.com> >>>> Signed-off-by: Judith Mendez <jm@ti.com> >>>> --- > > ... > >>>> diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c >>>> index 94dc82644113..76d11ce38220 100644 >>>> --- a/drivers/net/can/m_can/m_can_platform.c >>>> +++ b/drivers/net/can/m_can/m_can_platform.c >>>> @@ -5,6 +5,7 @@ >>>> // >>>> // Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/ >>>> +#include <linux/hrtimer.h> >>>> #include <linux/phy/phy.h> >>>> #include <linux/platform_device.h> >>>> @@ -96,12 +97,28 @@ static int m_can_plat_probe(struct platform_device *pdev) >>>> goto probe_fail; >>> >>> Please set "irq" to 0 during declaration. >> >> During declaration of irq, it is already set to 0: >> >> int irq, ret = 0; > > The initialization here applies only to ret. > > int irq = 0, ret = 0; Understood, thanks! > >>>> addr = devm_platform_ioremap_resource_byname(pdev, "m_can"); >>>> - irq = platform_get_irq_byname(pdev, "int0"); >>>> - if (IS_ERR(addr) || irq < 0) { >>>> - ret = -EINVAL; >>>> + if (IS_ERR(addr)) { >>>> + ret = PTR_ERR(addr); >>>> goto probe_fail; >>>> } >>>> + if (device_property_present(mcan_class->dev, "interrupts") || >>>> + device_property_present(mcan_class->dev, "interrupt-names")) { >>>> + irq = platform_get_irq_byname(pdev, "int0"); >>>> + if (irq == -EPROBE_DEFER) { >>>> + ret = -EPROBE_DEFER; >>>> + goto probe_fail; >>>> + } >>>> + if (irq < 0) { >>>> + ret = -EINVAL; >>> >>> Please return the original error value. >> >> The original value returned is -EINVAL: >> >> - if (IS_ERR(addr) || irq < 0) { >> - ret = -EINVAL; >> >> Perhaps I am missing something here? > > if (irq < 0) { > ret = irq; > ... > } > > And you can also get rid of the explicit test for -EPROBE_DEFER this > way simplifying the code. I misunderstood, thanks!! ~ Judith
Hi, On 7/6/23 3:48 PM, Francesco Dolcini wrote: > On Wed, Jul 05, 2023 at 02:53:54PM -0500, Judith Mendez wrote: >> v9: >> - Change add MS to HRTIMER_POLL_INTERVAL >> - Change syntax from "= 0" to "!" > > Please add the series version to the mail subject, you did it up to v8, > and you forgot now. Thanks Francesco, I will add v10 in next iteration. ~ Judith