mbox series

[0/5] clk: qcom: sc8280xp: add lpasscc reset control

Message ID 20230518113800.339158-1-srinivas.kandagatla@linaro.org
Headers show
Series clk: qcom: sc8280xp: add lpasscc reset control | expand

Message

Srinivas Kandagatla May 18, 2023, 11:37 a.m. UTC 
On SC8280XP, LPASS IP is controlled by q6dsp, however the reset lines
required by some of the IPs like Soundwire still need to be programmed from
Apps processor. This patchset adds support to reset controller on LPASS
CC and LPASS AudioCC.

Tested on X13s.

Thanks,
Srini

Srinivas Kandagatla (5):
  dt-bindings: clock: Add YAML schemas for LPASSCC and reset on SC8280XP
  dt-bindings: clock: Add YAML schemas for LPASS AUDIOCC and reset on
    SC8280XP
  clk: qcom: Add lpass clock controller driver for SC8280XP
  clk: qcom: Add lpass audio clock controller driver for SC8280XP
  arm64: dts: qcom: sc8280xp: add resets for soundwire controllers

 .../bindings/clock/qcom,sc8280xp-lpasscc.yaml | 68 ++++++++++++++
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        | 19 ++++
 drivers/clk/qcom/Kconfig                      |  8 ++
 drivers/clk/qcom/Makefile                     |  1 +
 drivers/clk/qcom/lpasscc-sc8280xp.c           | 94 +++++++++++++++++++
 .../dt-bindings/clock/qcom,lpasscc-sc8280xp.h | 17 ++++
 6 files changed, 207 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
 create mode 100644 drivers/clk/qcom/lpasscc-sc8280xp.c
 create mode 100644 include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h