mbox series

[0/2] Add initial support for RDP449 of IPQ9574 family

Message ID 20230516135013.3547-1-quic_devipriy@quicinc.com
Headers show
Series Add initial support for RDP449 of IPQ9574 family | expand

Message

Devi Priya May 16, 2023, 1:50 p.m. UTC 
Add the initial device tree support for the Reference Design
Platform(RDP) 449 based on IPQ9574 family of SoCs. This patch series adds
support for Console UART, SPI NOR and SMPA1 regulator node.

The series depends on the below patch sets which adds support for
SPI NOR and SMPA1 regulator nodes.
https://lore.kernel.org/linux-arm-msm/20230329053726.14860-3-quic_kathirav@quicinc.com/
https://lore.kernel.org/linux-arm-msm/20230407155727.20615-1-quic_devipriy@quicinc.com/

Devi Priya (2):
  dt-bindings: arm: qcom: document AL02-C6 board based on IPQ9574 family
  arm64: dts: qcom: ipq9574: add support for RDP449 variant

 .../devicetree/bindings/arm/qcom.yaml         |  2 +
 arch/arm64/boot/dts/qcom/Makefile             |  1 +
 arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts   | 80 +++++++++++++++++++
 3 files changed, 83 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts

Comments

Krzysztof Kozlowski May 16, 2023, 4:23 p.m. UTC | #1 
On 16/05/2023 15:50, Devi Priya wrote:
> Document AL02-C6 (Reference Design Platform 449) board based on IPQ9574
> family of SoCs.
> 
> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
> ---

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof