mbox series

[v2,0/6] arm64: qcom: sa8775p: add support for USB

Message ID 20230428130824.23803-1-quic_shazhuss@quicinc.com
Headers show
Series arm64: qcom: sa8775p: add support for USB | expand

Message

Shazad Hussain April 28, 2023, 1:08 p.m. UTC 
Update relavent DT bindings for USB, add new config to the phy driver,
add USB and PHY nodes to the .dtsi and enable them in the board .dts
for the sa8775p-ride platform.

v1 -> v2:
- correct dwc3 device tree bindings for irq's.
- collect R-b, A-b and T-b tags.

Shazad Hussain (6):
  dt-bindings: usb: qcom,dwc3: Add bindings for SA8775P
  dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for SA8775P
  dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add SA8775P USB PHY
    binding
  phy: qcom-qmp: Add SA8775P USB3 UNI phy
  arm64: dts: qcom: sa8775p: add USB nodes
  arm64: dts: qcom: sa8775p-ride: enable USB nodes

 .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml   |   1 +
 .../bindings/phy/qcom,usb-snps-femto-v2.yaml  |   1 +
 .../devicetree/bindings/usb/qcom,dwc3.yaml    |  21 ++
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts     |  92 +++++++
 arch/arm64/boot/dts/qcom/sa8775p.dtsi         | 239 +++++++++++++++++-
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c       |  45 ++++
 6 files changed, 397 insertions(+), 2 deletions(-)