From patchwork Wed Apr 5 19:59:21 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 670557 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9FC09C76188 for ; Wed, 5 Apr 2023 19:59:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231484AbjDET7u (ORCPT ); Wed, 5 Apr 2023 15:59:50 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33222 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229707AbjDET7o (ORCPT ); Wed, 5 Apr 2023 15:59:44 -0400 Received: from mx.sberdevices.ru (mx.sberdevices.ru [45.89.227.171]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BB7A740D2; Wed, 5 Apr 2023 12:59:40 -0700 (PDT) Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id D3D285FD06; Wed, 5 Apr 2023 22:59:37 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1680724777; bh=LSl+IA5XmKvc175FJd1XUtDpbIRvL/nOW5IN0qxo7Xk=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=LQ1h1M2wvqhsI8pvQLWKYOg3OGxE2fmLoqwplab14RV/VXr5xIv6jdYbG2Paj6Ksx 7CK4Gr004wevyTTtVzopCbO1XcYADy68bOBNH4Ar+DAlfmUJM2Pu2Y1TouzcIviYyp k5uKl6CkrcAaW0aZJZwrW5oOOVjXXsWQHou8afX9v2fjtVekm9pqxeXl8PysRPcZ6G hhfkToA3692ARThei3f2M7XrICMb3QqGPGoA0a8eVl5CAju+Q7KgUJhABYg5Y6wCms 2ylzEjfUFtIOa3yWcXREtA+X5cut0nqReuv+QI3Of/fjiJKbBdB63Yhp/KYovx/QO1 yRTA+yITpzGIA== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Wed, 5 Apr 2023 22:59:36 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v13 0/6] add Amlogic A1 clock controller drivers Date: Wed, 5 Apr 2023 22:59:21 +0300 Message-ID: <20230405195927.13487-1-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH02.sberdevices.ru (172.16.1.5) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/04/05 16:44:00 #21035356 X-KSMG-AntiVirus-Status: Clean, skipped Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org A1 SoC has four clock controllers on the board: PLL, Peripherals, CPU, and Audio. The audio clock controller is different from others, but the rest are very similar from a functional and regmap point of view. This patch series add support for Amlogic A1 PLL and Peripherals clock drivers. It blocks all A1 peripherals mainline support and a couple of patch series, which were already reviewed and acked, but weren't merged due to pending clock controller drivers series, e.g. https://lore.kernel.org/linux-amlogic/7hd09cw9oh.fsf@baylibre.com/ TODO: CPU and Audio clock controllers are not included in this patch series, it will be sent later. The following clks from these controllers are not supported for now: * Audio clks - vad, mclk_vad, mclk_d, resample_a, locker_in, mclk_b, pdmdclk, pdmsysclk, eqdrc, spdifin, mclk_a, audio2_toaudiotop, audio2_tovad, audio2_toddr_vad, audio2_tdmin_vad, audio2_pdm, audio2_ddr_arb, audio_audiolocker, audio_eqdrc, audio_resamplea, audio_spdifin, audio_toddrb, audio_toddra, audio_frddrb, audio_frddra, audio_tdmoutb, audio_tdmouta, audio_loopbacka, audio_tdminlb, audio_tdminb, audio_tdmina, audio_ddr_arb, mclk_c * CPU clks: cpu_fixed_source_sel0, cpu_fixed_source_div0, cpu_fixed_source_sel1, cpu_fixed_source_div1, cpu_clk Validation: * to double check all clk flags run below helper script: pushd /sys/kernel/debug/clk for f in *; do if [[ -f "$f/clk_flags" ]]; then flags="$(cat $f/clk_flags | awk '{$1=$1};1' | sed ':a;N;$!ba;s/\n/ | /g')" echo -e "$f: $flags" fi done popd * to trace current clks state use '/sys/kernel/debug/clk/clk_dump' node with jq post-processing: $ cat /sys/kernel/debug/clk/clk_dump | jq '.' > clk_dump.json * to debug clk rate propagation, compile kernel with the following definition: $ sed -i "s/undef CLOCK_ALLOW_WRITE_DEBUGFS/define CLOCK_ALLOW_WRITE_DEBUGFS/g" drivers/clk/clk.c after that, clk_rate debug node for each clock will be available for write operation Changes v13 since v12 at [13]: - make the clock object registration order from the roots to the leaves - rearrange the clkids following above rule Changes v12 since v11 at [12]: - split the DT bindings patchset into two patches: one for the PLL clock controller driver, and one for the peripherals clock controller driver - to satisfy the DT binding checker, use fake references to the peripherals clock controller in the PLL DT bindings schema, and then replace them with real references when the peripherals bindings become available. - remove the public/private clocks concept from both controllers, and instead use a linear clkid list with both exposed and internal objects, all of which are registered in the clock provider - combine all comments about RTC children with the flag 'CLK_SET_RATE_NO_REPARENT' into a single item with multiple references to it Changes v11 since v10 at [11]: - change include/dt-bindings license to proper value required for bindings files: 'GPL-2.0-only OR BSD-2-Clause' - pll and peripherals clocks are split into public and private parts; public clocks are available for external consumers through the DT layer, private clocks include internal muxes and dividers of composite clocks, they are placed inside clock controller driver without external access - make public clks CLKID bindings continuous - mark the following clock muxes as NO_REPARENT and add them to public clocks list: GEN_SEL, DSPA_A_SEL, DSPA_B_SEL, DSPB_A_SEL, DSP_B_B_SEL, PWM_A_SEL, PWM_B_SEL, PWM_C_SEL, PWM_D_SEL, PWM_E_SEL, PWM_F_SEL, CECA_32K_SEL, CECB_32K_SEL; each of them can be inherited from more accurate RTC clock and sometimes it's required to forbid reparenting in such situation; also GEN_SEL can be connected to external PAD and should not change parent automatically due to rate propagation. For such clocks user must setup parents on the DT side Changes v10 since v9 at [10]: - split general clk-pll changes into two different patchsets: optional rst usage and new power sequence - squash dt bindings patchsets to avoid chicken-or-the-egg problem during run dt binding check routines - add vendor prefix to PLL and Peripherals clkcs bindings filenames - clear managed hifi_pll fields from initial poke table - move DSPA_SEL, DSPB_SEL and SARADC_SEL to private clkid table, because it should not be opened for direct usage - pwm_a clk used for voltage regulation is not critical anymore, it must be included to the proper cpu voltage regulation setup (will be available in the next patch series) - as discussed with Jerome, dspX clks are simple clocks and it should be enabled/disabled/ignored/anything else from appropriate DSP driver, so remove CLK_IGNORE_UNUSED tags - provide more understandable comments and remove irrelevant (I hope so) - remove CONFIG_OF usage, because it's redundant - fix license issue, it's GPL-2.0+ only in the current version - some commit msgs rewording Changes v9 since v8 at [9]: - remove common a1-clkc driver for the first version of a1 clock controllers as Jerome suggested (it will be discussed after s4 and a1 clks landed, hope so) - replace inherited a1-pll clk_pll_ops with common ops and introduce custom A1 PLL logic under MESON_PARM_APPLICABLE() conditions - rename xtal depended clocks in PLL and Peripherals domains - remove 'a1_' prefix for all clocks, because they are already inside A1 driver, it's redundant - change udelay() to usleep_range() as preferred for small msec amount - purge all double quotes from the yaml schemas - use proper dt node names following kernel guidelines https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation - use devm_platform_ioremap_resource() instead of simple devm_ioremap_resource() - mark all dspX clocks as CLK_IGNORE_UNUSED, because we do not want to touch these clocks during CCF initialization due to possible workload execution on it started from bootloader; in this case bootloader already made all initialization stuff for dspX - also mark all dspX with NO_REPARENT tag, because from dspX clocks we want to select proper clk source from device tree Changes v8 since v7 at [8]: - introduced a1-clkc common driver for all A1 clock controllers - exported meson_clk_pll_wait_lock symbol - supported meson-a1-clkc common driver in the a1-pll and a1 clkc - inherited a1-pll from the base clk-pll driver, implemented own version of init/enable/disable/enabled routines; rate calculating logic is fully the same - aligned CLKID-related definitions with CLKID list from order perspective to remove holes and permutations - corrected Kconfig dependencies and types - provided correct MODULE_AUTHORs() - optimized and fixed up some clock relationships - removed unused register offset definitions - fixed up A1 PLL and Peripherals clkc dtb_check errors - fixed clk_summary kernel panic due to missing a1_pad_ctrl clk_regmap definition - included PLL and Peripherals clk controllers to the base a1 dts - The previous v7 version [8] had several logic and style problems, all of them are resolved in this version. Original Jian Hu v7 patches are not touched, and all additional fixes are implemented in separate patches. Patch "clk: meson: add support for A1 PLL clock ops" is removed, because a1-pll clk driver inherits all stuff from clk-pll base driver, just implements custom init/enable/disable/is_enabled callbacks. Changes v7 since v6 at [7]: - fix 'dt_binding_check' compiling error - add acked-by Changes v6 since v5 at [6]: - fix yaml file - add rst/current_en/l_detect parm detection - remove 'meson_eeclkc_data' in a1.c and a1-pll.c Changes v5 since v4 at [5]: - change yaml GPL - drop meson-eeclk.c patch, add probe function in each driver - add CLK_IS_CRITICAL for sys_clk clock, drop the flag for sys_a and sys_b - add new parm for pll, add protection for rst parm - drop flag for a1_fixed_pll - remove the same comment for fclk_div, add "refer to" - add critical flag for a1_sys_clk - remove rtc table - rename a1_dspa_en_dspa and a1_dspb_en_dspb - remove useless comment Changes v4 since v3 at [3]: - fix reparenting orphan failed, it depends on jerome's patch [4] - fix changelist in v3 about reparenting orphan - remove the dts patch Changes v3 since v2 at [2]: - add probe function for A1 - separate the clock driver into two patch - change some clock flags and ops - add support for a1 PLL ops - add A1 clock node - fix reparenting orphan clock failed, registering xtal_fixpll and xtal_hifipll after the provider registration, it is not a best way. Changes v2 since v1 at [1]: - place A1 config alphabetically - add actual reason for RO ops, CLK_IS_CRITICAL, CLK_IGNORE_UNUSED - separate the driver into two driver: peripheral and pll driver - delete CLK_IGNORE_UNUSED flag for pwm b/c/d/e/f clock, dsp clock - delete the change in Kconfig.platforms, address to Kevin alone - remove the useless comments - modify the meson pll driver to support A1 PLLs Links: [1] https://lkml.kernel.org/r/1569411888-98116-1-git-send-email-jian.hu@amlogic.com [2] https://lkml.kernel.org/r/1571382865-41978-1-git-send-email-jian.hu@amlogic.com [3] https://lkml.kernel.org/r/20191129144605.182774-1-jian.hu@amlogic.com [4] https://lkml.kernel.org/r/20191203080805.104628-1-jbrunet@baylibre.com [5] https://lkml.kernel.org/r/20191206074052.15557-1-jian.hu@amlogic.com [6] https://lkml.kernel.org/r/20191227094606.143637-1-jian.hu@amlogic.com [7] https://lkml.kernel.org/r/20200116080440.118679-1-jian.hu@amlogic.com [8] https://lore.kernel.org/linux-amlogic/20200120034937.128600-1-jian.hu@amlogic.com/ [9] https://lore.kernel.org/linux-amlogic/20221201225703.6507-1-ddrokosov@sberdevices.ru/ [10] https://lore.kernel.org/all/20230301183759.16163-1-ddrokosov@sberdevices.ru/ [11] https://lore.kernel.org/all/20230313201259.19998-1-ddrokosov@sberdevices.ru/ [12] https://lore.kernel.org/all/20230321193014.26349-1-ddrokosov@sberdevices.ru/ [13] https://lore.kernel.org/all/20230404155332.9571-1-ddrokosov@sberdevices.ru/ Dmitry Rokosov (6): clk: meson: make pll rst bit as optional clk: meson: introduce new pll power-on sequence for A1 SoC family dt-bindings: clock: meson: add A1 PLL clock controller bindings clk: meson: a1: add Amlogic A1 PLL clock controller driver dt-bindings: clock: meson: add A1 Peripherals clock controller bindings clk: meson: a1: add Amlogic A1 Peripherals clock controller driver .../bindings/clock/amlogic,a1-clkc.yaml | 73 + .../bindings/clock/amlogic,a1-pll-clkc.yaml | 59 + MAINTAINERS | 1 + drivers/clk/meson/Kconfig | 20 + drivers/clk/meson/Makefile | 2 + drivers/clk/meson/a1-pll.c | 356 +++ drivers/clk/meson/a1-pll.h | 47 + drivers/clk/meson/a1.c | 2273 +++++++++++++++++ drivers/clk/meson/a1.h | 114 + drivers/clk/meson/clk-pll.c | 47 +- drivers/clk/meson/clk-pll.h | 2 + include/dt-bindings/clock/amlogic,a1-clkc.h | 114 + .../dt-bindings/clock/amlogic,a1-pll-clkc.h | 20 + 13 files changed, 3121 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml create mode 100644 drivers/clk/meson/a1-pll.c create mode 100644 drivers/clk/meson/a1-pll.h create mode 100644 drivers/clk/meson/a1.c create mode 100644 drivers/clk/meson/a1.h create mode 100644 include/dt-bindings/clock/amlogic,a1-clkc.h create mode 100644 include/dt-bindings/clock/amlogic,a1-pll-clkc.h Reviewed-by: Rob Herring