mbox series

[00/14] arm64: dts: qcom: sa8775p: add basic PMIC support

Message ID 20230314183043.619997-1-brgl@bgdev.pl
Headers show
Series arm64: dts: qcom: sa8775p: add basic PMIC support | expand

Message

Bartosz Golaszewski March 14, 2023, 6:30 p.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This adds support for a number of PMIC functionalities on sa8775p. The PMIC
used on the reference board is pm8654au which is another variant of the SPMI
PMIC from Qualcomm. This series doesn't yet add regulators as these will be
added separately together with upcoming users (UFS, USB, etc.). The RTC
doesn't allow setting time and needs to be used in conjunction with SDAM
the support for which will also be added separately.

Bartosz Golaszewski (14):
  dt-bindings: interrupt-controller: qcom-pdc: add compatible for
    sa8775p
  arm64: dts: qcom: sa8775p: add the pdc node
  arm64: dts: qcom: sa8775p: add the spmi node
  dt-bindings: mfd: qcom,spmi-pmic: add compatible for pmm8654au
  arm64: dts: qcom: sa8775p: add support for the on-board PMICs
  arm64: dts: qcom: sa8775p-ride: enable PMIC support
  arm64: dts: qcom: sa8775p: add the Power On device node
  arm64: dts: qcom: sa8775p: pmic: add the power key
  arm64: dts: qcom: sa8775p-ride: enable the power key
  arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN
    input
  arm64: dts: qcom: sa8775p: pmic: add thermal zones
  dt-bindings: pinctrl: qcom,pmic-gpio: add compatible for
    pmm8654au-gpio
  pinctrl: qcom: spmi-gpio: add support for pmm8654au-gpio
  arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes

 .../interrupt-controller/qcom,pdc.yaml        |   1 +
 .../bindings/mfd/qcom,spmi-pmic.yaml          |   1 +
 .../bindings/pinctrl/qcom,pmic-gpio.yaml      |   2 +
 arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi   | 136 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts     |   5 +
 arch/arm64/boot/dts/qcom/sa8775p.dtsi         |  59 ++++++++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c      |   1 +
 7 files changed, 205 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi

Comments

Krzysztof Kozlowski March 19, 2023, 12:44 p.m. UTC | #1
On 14/03/2023 19:30, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Add a compatible for the Power Domain Controller on SA8775p platforms.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Marc Zyngier <maz@kernel.org>


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Bartosz Golaszewski March 20, 2023, 10:50 a.m. UTC | #2
On Tue, Mar 14, 2023 at 9:25 PM Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
>
>
> On 14.03.2023 19:30, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> >
> > Add the PON node to PMIC #0 for sa8775p platforms.
> >
> > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 7 +++++++
> >  1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> > index 77e2515a7ab9..5d73212fbd16 100644
> > --- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> > @@ -12,6 +12,13 @@ pmk8775_0: pmic@0 {
> >               reg = <0x0 SPMI_USID>;
> >               #address-cells = <1>;
> >               #size-cells = <0>;
> > +
> > +             pmk8775_0_pon: pon@1200 {
> > +                     compatible = "qcom,pmk8350-pon";
> > +                     reg = <0x1200>, <0x800>;
> reg-names = "hlos", "pbs"
>
> Also, are you sure hlos shouldn't be @1300?
>

Nope, that's the right one here.

Bart

> Konrad
> > +                     mode-recovery = <0x1>;
> > +                     mode-bootloader = <0x2>;
> > +             };
> >       };
> >
> >       pmk8775_1: pmic@2 {