mbox series

[v3,0/3] Qcom: Add GIC-ITS support to SM8450 PCIe controllers

Message ID 20230102105821.28243-1-manivannan.sadhasivam@linaro.org
Headers show
Series Qcom: Add GIC-ITS support to SM8450 PCIe controllers | expand

Message

Manivannan Sadhasivam Jan. 2, 2023, 10:58 a.m. UTC 
Hello,

This series adds GIC-ITS support to SM8450 PCIe controllers for signalling
the MSIs received from endpoint devices to the CPU cores.

The GIC-ITS MSI implementation provides an advantage over internal MSI
implementation using Locality-specific Peripheral Interrupts (LPI) that
would allow MSIs to be targeted for each CPU core.

This series has been tested on SM8450 based dev board that works using an
out-of-tree dts where the MSIs from endpoint devices are distributed across
the CPU cores.

Thanks,
Mani

Changes in v2:

* Reworded the commit messages as per Lorenzo's comments
* Rebased on top of v6.2-rc1

Changes in v2:

* Swapped the Device ID for PCIe0 as it causes same issue as PCIe1
* Removed the definition of msi-map and msi-map-mask from binding
* Added Ack from Krzysztof

Manivannan Sadhasivam (3):
  dt-bindings: PCI: qcom: Update maintainers
  dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
  arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1

 .../devicetree/bindings/pci/qcom,pcie.yaml    | 14 +++++++++----
 arch/arm64/boot/dts/qcom/sm8450.dtsi          | 20 +++++++++++++------
 2 files changed, 24 insertions(+), 10 deletions(-)