| Message ID | 20221018123849.23695-1-sinthu.raja@ti.com |
|---|---|
| Headers | show |
| Series | AM68 SK: Add initial support | expand |
On 18/10/2022 08:38, Sinthu Raja wrote: > From: Sinthu Raja <sinthu.raja@ti.com> > > AM68 Starter Kit (SK)[1] is a low cost, small form factor board designed > for TI’s AM68 SoC. TI’s AM68 SoC comprises of dual core A72, high > performance vision accelerators, hardware accelerators, latest C71x > DSP, high bandwidth real-time IPs for capture and display. The SoC is > power optimized to provide best in class performance for industrial > applications. > > AM68 SK supports the following interfaces: > * 16 GB LPDDR4 RAM > * x1 Gigabit Ethernet interface > * x1 USB 3.1 Type-C port > * x2 USB 3.1 Type-A ports > * x1 PCIe M.2 M Key > * 512 Mbit OSPI flash > * x2 CSI2 Camera interface (RPi and TI Camera connector) > * 40-pin Raspberry Pi GPIO header > > SK's System on Module (SoM) contains the SoC and DDR. > Therefore, add DT node for the SOC and DDR on the SoM. > > Schematics: https://www.ti.com/lit/zip/SPRR463 > TRM: http://www.ti.com/lit/pdf/spruj28 > > Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> > --- > arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 129 +++++++++++++++++++++ > 1 file changed, 129 insertions(+) > create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi > > diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi > new file mode 100644 > index 000000000000..734c13eb0490 > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi > @@ -0,0 +1,129 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ > + */ > + > +/dts-v1/; > + > +#include "k3-j721s2.dtsi" > +#include <dt-bindings/gpio/gpio.h> > + > +/ { > + memory@80000000 { > + device_type = "memory"; > + /* 16 GB RAM */ > + reg = <0x00 0x80000000 0x00 0x80000000>, > + <0x08 0x80000000 0x03 0x80000000>; > + }; > + > + /* Reserving memory regions still pending */ > + reserved_memory: reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + secure_ddr: optee@9e800000 { > + reg = <0x00 0x9e800000 0x00 0x01800000>; > + alignment = <0x1000>; > + no-map; > + }; > + Drop empty line. Best regards, Krzysztof
From: Sinthu Raja <sinthu.raja@ti.com> AM68 Starter Kit (SK) is a low cost, small form factor board designed for TI’s J721S2/AM68 SoC. TI’s AM68 SoC comprises of dual core A72, high performance vision accelerators, hardware accelerators, latest C71x DSP, high bandwidth real-time IPs for capture and display. The SoC is power optimized to provide best in class performance for industrial and automotive applications. Refer below link to J721S2/AM68 Technical Reference Manual for further details: http://www.ti.com/lit/pdf/spruj28 AM68 SK supports the following interfaces: * 16 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 USB 3.1 Type-C port * x2 USB 3.1 Type-A ports * x1 PCIe M.2 M Key * 512 Mbit OSPI flash * x2 CSI2 Camera interface (RPi and TI Camera connector) * 40-pin Raspberry Pi GPIO header This series of patch add initial support for AM68 starter kit. Design files can be referrred from https://www.ti.com/lit/zip/SPRR463 Sinthu Raja (3): dt-bindings: arm: ti: Add binding for AM68 SK arm64: dts: ti: Add initial support for AM68 SK System on Module arch: arm64: ti: Add support for AM68 SK base board .../devicetree/bindings/arm/ti/k3.yaml | 1 + arch/arm64/boot/dts/ti/Makefile | 2 + .../boot/dts/ti/k3-am68-sk-base-board.dts | 459 ++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 129 +++++ 4 files changed, 591 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi