mbox series

[v4,0/3] adc-joystick: Add polled support

Message ID 20220627221444.3638-1-macroalpha82@gmail.com
Headers show
Series adc-joystick: Add polled support | expand

Message

Chris Morgan June 27, 2022, 10:14 p.m. UTC
Add support to the existing adc-joystick driver to support polling
rather than relying on triggered buffers. This is useful for devices
that do not offer triggered buffers in hardware. Code adapted from
changes made by Maya Matuszczyk <maccraft123mc@gmail.com>.

Changes from V3:
 - After lengthy discussion decided to support with existing attribute
   of "poll-interval". If present, the driver will use polling and if
   not present, it will use triggered buffers (as the driver does
   today).
 - Corrected some lines to honor the 80 character line-limit.
 - Check return value from polling method and return early if there
   is an error reading the data.

Changes from V2:
 - Changed parameter from "adc-joystick,polled" to
   "adc-joystick,no-hardware-trigger" as it is more representative of
   what the driver and hardware are doing.

Changes from V1:
 - Removed driver compatible string of "adc-joystick-polled".
 - Added new optional boolean value of "adc-joystick,polled".
 - Cleaned up if statements regarding polling behavior.

Chris Morgan (3):
  dt-bindings: adc-joystick: add poll-interval
  Input: adc-joystick - Add polled input device support
  arm64: dts: rockchip: Update joystick to polled for Odroid-Go2

 .../bindings/input/adc-joystick.yaml          |  6 +++
 .../boot/dts/rockchip/rk3326-odroid-go2.dts   |  1 +
 drivers/input/joystick/adc-joystick.c         | 49 ++++++++++++++-----
 3 files changed, 45 insertions(+), 11 deletions(-)