| Message ID | 20210727202004.712665-1-dmitry.baryshkov@linaro.org |
|---|---|
| Headers | show |
| Series | clk: qcom: use power-domain for sm8250's clock controllers | expand |
On Tue, 27 Jul 2021 at 22:20, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: > > On SM8250 both the display and video clock controllers are powered up by > the MMCX power domain. Handle this by linking clock controllers to the > proper power domain, and using runtime power management to enable and > disable the MMCX power domain. > > Dependencies: > - https://lore.kernel.org/linux-arm-msm/20210703005416.2668319-1-bjorn.andersson@linaro.org/ > (pending) > > Changes since v5: > - Dropped devm_pm_runtime_enable callback to remove extra dependency > > Changes since v4: > - Dropped pm_runtime handling from drivers/clk/qcom/common.c Moved the > code into dispcc-sm8250.c and videocc-sm8250.c > > Changes since v3: > - Wrap gdsc_enable/gdsc_disable into pm_runtime_get/put calls rather > than calling pm_runtime_get in gdsc_enabled and _put in gdsc_disable > - Squash gdsc patches together to remove possible dependencies between > two patches. > > Changes since v2: > - Move pm_runtime calls from generic genpd code to the gdsc code for > now (as suggested by Ulf & Bjorn) > > Changes since v1: > - Rebase on top of Bjorn's patches, removing the need for setting > performance state directly. > - Move runtime PM calls from GDSC code to generic genpd code. > - Always call pm_runtime_enable in the Qualcomm generic clock > controller code. > - Register GDSC power domains as subdomains of the domain powering the > clock controller if there is one. > > ---------------------------------------------------------------- > Dmitry Baryshkov (8): > dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain > dt-bindings: clock: qcom,videocc: add mmcx power domain > clk: qcom: dispcc-sm8250: use runtime PM for the clock controller > clk: qcom: videocc-sm8250: use runtime PM for the clock controller > clk: qcom: gdsc: enable optional power domain support > arm64: dts: qcom: sm8250: remove mmcx regulator > clk: qcom: dispcc-sm8250: stop using mmcx regulator > clk: qcom: videocc-sm8250: stop using mmcx regulator > > .../bindings/clock/qcom,dispcc-sm8x50.yaml | 7 +++ > .../devicetree/bindings/clock/qcom,videocc.yaml | 7 +++ > arch/arm64/boot/dts/qcom/sm8250.dtsi | 11 +--- > drivers/clk/qcom/dispcc-sm8250.c | 28 ++++++++-- > drivers/clk/qcom/gdsc.c | 59 ++++++++++++++++++++-- > drivers/clk/qcom/gdsc.h | 2 + > drivers/clk/qcom/videocc-sm8250.c | 31 +++++++++--- > 7 files changed, 124 insertions(+), 21 deletions(-) > For the series: Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Kind regards Uffe
Quoting Dmitry Baryshkov (2021-07-27 13:19:56) > On SM8250 both the display and video clock controllers are powered up by > the MMCX power domain. Handle this by linking clock controllers to the > proper power domain, and using runtime power management to enable and > disable the MMCX power domain. > > Dependencies: > - https://lore.kernel.org/linux-arm-msm/20210703005416.2668319-1-bjorn.andersson@linaro.org/ > (pending) Does this patch series need to go through the qcom tree? Presumably the dependency is going through qcom -> arm-soc > > Changes since v5: > - Dropped devm_pm_runtime_enable callback to remove extra dependency > > Changes since v4: > - Dropped pm_runtime handling from drivers/clk/qcom/common.c Moved the > code into dispcc-sm8250.c and videocc-sm8250.c > > Changes since v3: > - Wrap gdsc_enable/gdsc_disable into pm_runtime_get/put calls rather > than calling pm_runtime_get in gdsc_enabled and _put in gdsc_disable > - Squash gdsc patches together to remove possible dependencies between > two patches. >
On 26/08/2021 21:31, Stephen Boyd wrote: > Quoting Dmitry Baryshkov (2021-07-27 13:19:56) >> On SM8250 both the display and video clock controllers are powered up by >> the MMCX power domain. Handle this by linking clock controllers to the >> proper power domain, and using runtime power management to enable and >> disable the MMCX power domain. >> >> Dependencies: >> - https://lore.kernel.org/linux-arm-msm/20210703005416.2668319-1-bjorn.andersson@linaro.org/ >> (pending) > > Does this patch series need to go through the qcom tree? Presumably the > dependency is going through qcom -> arm-soc It looks like Bjorn did not apply his patches in the for-5.15 series, so we'd have to wait anyway. Probably I should rebase these patches instead on Rajendra's required-opps patch (which is going in this window). > >> >> Changes since v5: >> - Dropped devm_pm_runtime_enable callback to remove extra dependency >> >> Changes since v4: >> - Dropped pm_runtime handling from drivers/clk/qcom/common.c Moved the >> code into dispcc-sm8250.c and videocc-sm8250.c >> >> Changes since v3: >> - Wrap gdsc_enable/gdsc_disable into pm_runtime_get/put calls rather >> than calling pm_runtime_get in gdsc_enabled and _put in gdsc_disable >> - Squash gdsc patches together to remove possible dependencies between >> two patches. >>
Quoting Dmitry Baryshkov (2021-08-26 14:56:23) > On 26/08/2021 21:31, Stephen Boyd wrote: > > Quoting Dmitry Baryshkov (2021-07-27 13:19:56) > >> On SM8250 both the display and video clock controllers are powered up by > >> the MMCX power domain. Handle this by linking clock controllers to the > >> proper power domain, and using runtime power management to enable and > >> disable the MMCX power domain. > >> > >> Dependencies: > >> - https://lore.kernel.org/linux-arm-msm/20210703005416.2668319-1-bjorn.andersson@linaro.org/ > >> (pending) > > > > Does this patch series need to go through the qcom tree? Presumably the > > dependency is going through qcom -> arm-soc > > It looks like Bjorn did not apply his patches in the for-5.15 series, so > we'd have to wait anyway. Probably I should rebase these patches instead > on Rajendra's required-opps patch (which is going in this window). > Ok. Thanks. I'll drop it from my queue for now.
On Sun, 29 Aug 2021 at 06:51, Stephen Boyd <sboyd@kernel.org> wrote: > > Quoting Dmitry Baryshkov (2021-08-26 14:56:23) > > On 26/08/2021 21:31, Stephen Boyd wrote: > > > Quoting Dmitry Baryshkov (2021-07-27 13:19:56) > > >> On SM8250 both the display and video clock controllers are powered up by > > >> the MMCX power domain. Handle this by linking clock controllers to the > > >> proper power domain, and using runtime power management to enable and > > >> disable the MMCX power domain. > > >> > > >> Dependencies: > > >> - https://lore.kernel.org/linux-arm-msm/20210703005416.2668319-1-bjorn.andersson@linaro.org/ > > >> (pending) > > > > > > Does this patch series need to go through the qcom tree? Presumably the > > > dependency is going through qcom -> arm-soc > > > > It looks like Bjorn did not apply his patches in the for-5.15 series, so > > we'd have to wait anyway. Probably I should rebase these patches instead > > on Rajendra's required-opps patch (which is going in this window). > > > > Ok. Thanks. I'll drop it from my queue for now. Just for the reference. I've sent v7 of this patchset. After thinking more about power domains relationship, I think we have a hole in the abstraction here. Currently subdomains cause power domains to be powered up, but do not dictate the performance level the parent domain should be working in. While this does not look like an issue for the gdsc (and thus it can be easily solved by the Bjorn's patches, which enforce rpmhpd to be powered on to 'at least lowest possible' performance state, this might be not the case for the future links. I think at some point the pd_add_subdomain() interface should be extended with the ability to specify minimum required performance state when the link becomes on. Until that time I have changed code to enforce having clock controller in pm resume state when gdsc is enabled, thus CC itself votes on parent's (rpmhpd) performance state.
On Sun, 29 Aug 2021 at 17:54, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: > > On Sun, 29 Aug 2021 at 06:51, Stephen Boyd <sboyd@kernel.org> wrote: > > > > Quoting Dmitry Baryshkov (2021-08-26 14:56:23) > > > On 26/08/2021 21:31, Stephen Boyd wrote: > > > > Quoting Dmitry Baryshkov (2021-07-27 13:19:56) > > > >> On SM8250 both the display and video clock controllers are powered up by > > > >> the MMCX power domain. Handle this by linking clock controllers to the > > > >> proper power domain, and using runtime power management to enable and > > > >> disable the MMCX power domain. > > > >> > > > >> Dependencies: > > > >> - https://lore.kernel.org/linux-arm-msm/20210703005416.2668319-1-bjorn.andersson@linaro.org/ > > > >> (pending) > > > > > > > > Does this patch series need to go through the qcom tree? Presumably the > > > > dependency is going through qcom -> arm-soc > > > > > > It looks like Bjorn did not apply his patches in the for-5.15 series, so > > > we'd have to wait anyway. Probably I should rebase these patches instead > > > on Rajendra's required-opps patch (which is going in this window). > > > > > > > Ok. Thanks. I'll drop it from my queue for now. > > Just for the reference. I've sent v7 of this patchset. After thinking > more about power domains relationship, I think we have a hole in the > abstraction here. Currently subdomains cause power domains to be > powered up, but do not dictate the performance level the parent domain > should be working in. That's not entirely true. In genpd_add_subdomain() we verify that if the child is powered on, the parent must already be powered on, otherwise we treat this a bad setup and return an error code. What seems to be missing though, is that if there is a performance state applied for the child domain, that should be propagated to the parent domain too. Right? > While this does not look like an issue for the > gdsc (and thus it can be easily solved by the Bjorn's patches, which > enforce rpmhpd to be powered on to 'at least lowest possible' > performance state, this might be not the case for the future links. I > think at some point the pd_add_subdomain() interface should be > extended with the ability to specify minimum required performance > state when the link becomes on. I guess that minimum performance state could be considered as a "required-opp" in the DT node for the power-domain provider, no? Another option would simply be to manage this solely in the platform/soc specific genpd provider. Would that work? > Until that time I have changed code to > enforce having clock controller in pm resume state when gdsc is > enabled, thus CC itself votes on parent's (rpmhpd) performance state. > > > -- > With best wishes > Dmitry Kind regards Uffe
On SM8250 both the display and video clock controllers are powered up by the MMCX power domain. Handle this by linking clock controllers to the proper power domain, and using runtime power management to enable and disable the MMCX power domain. Dependencies: - https://lore.kernel.org/linux-arm-msm/20210703005416.2668319-1-bjorn.andersson@linaro.org/ (pending) Changes since v5: - Dropped devm_pm_runtime_enable callback to remove extra dependency Changes since v4: - Dropped pm_runtime handling from drivers/clk/qcom/common.c Moved the code into dispcc-sm8250.c and videocc-sm8250.c Changes since v3: - Wrap gdsc_enable/gdsc_disable into pm_runtime_get/put calls rather than calling pm_runtime_get in gdsc_enabled and _put in gdsc_disable - Squash gdsc patches together to remove possible dependencies between two patches. Changes since v2: - Move pm_runtime calls from generic genpd code to the gdsc code for now (as suggested by Ulf & Bjorn) Changes since v1: - Rebase on top of Bjorn's patches, removing the need for setting performance state directly. - Move runtime PM calls from GDSC code to generic genpd code. - Always call pm_runtime_enable in the Qualcomm generic clock controller code. - Register GDSC power domains as subdomains of the domain powering the clock controller if there is one. ---------------------------------------------------------------- Dmitry Baryshkov (8): dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain dt-bindings: clock: qcom,videocc: add mmcx power domain clk: qcom: dispcc-sm8250: use runtime PM for the clock controller clk: qcom: videocc-sm8250: use runtime PM for the clock controller clk: qcom: gdsc: enable optional power domain support arm64: dts: qcom: sm8250: remove mmcx regulator clk: qcom: dispcc-sm8250: stop using mmcx regulator clk: qcom: videocc-sm8250: stop using mmcx regulator .../bindings/clock/qcom,dispcc-sm8x50.yaml | 7 +++ .../devicetree/bindings/clock/qcom,videocc.yaml | 7 +++ arch/arm64/boot/dts/qcom/sm8250.dtsi | 11 +--- drivers/clk/qcom/dispcc-sm8250.c | 28 ++++++++-- drivers/clk/qcom/gdsc.c | 59 ++++++++++++++++++++-- drivers/clk/qcom/gdsc.h | 2 + drivers/clk/qcom/videocc-sm8250.c | 31 +++++++++--- 7 files changed, 124 insertions(+), 21 deletions(-)