mbox series

[v8,0/2] gpu: drm: add driver for ili9361 panel

Message ID 20210331092114.3185882-1-daniel@zonque.org
Headers show
Series gpu: drm: add driver for ili9361 panel | expand

Message

Daniel Mack March 31, 2021, 9:21 a.m. UTC
This is v3 of the series.

Changelog:

v2 -> v3:
	* Turn Documentation into yaml format

v3 -> v4:
	* Fix reference error in yaml file

v4 -> v5:
	* More yaml file documentation fixes

v5 -> v6:
	* More yaml file documentation fixes

v6 -> v7:
	* Fix ordering of patches

v7 -> v8:
	* More yaml file documentation fixes

Daniel Mack (2):
  dt-bindings: display: add bindings for newhaven,1.8-128160EF
  drm/tiny: add driver for newhaven,1.8-128160EF

 .../display/panel/ilitek,ili9163.yaml         | 69 +++++++++++++++++++
 drivers/gpu/drm/tiny/Kconfig                  |  13 +
 drivers/gpu/drm/tiny/Makefile                 |   1 +
 drivers/gpu/drm/tiny/ili9163.c                | 224 ++++++++++++++++++
 4 files changed, 307 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9163.yaml
 create mode 100644 drivers/gpu/drm/tiny/ili9163.c

Comments

Thomas Zimmermann April 8, 2021, 11:11 a.m. UTC | #1
Hi,

just trivial points below. In any case

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>


Am 31.03.21 um 11:21 schrieb Daniel Mack:
> This patch adds support for Newhaven's NHD-1.8-128160EF display, featuring

> an Ilitek ILI9163 controller.

> 

> Signed-off-by: Daniel Mack <daniel@zonque.org>

> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

> ---

>   drivers/gpu/drm/tiny/Kconfig   |  13 ++

>   drivers/gpu/drm/tiny/Makefile  |   1 +

>   drivers/gpu/drm/tiny/ili9163.c | 224 +++++++++++++++++++++++++++++++++

>   3 files changed, 238 insertions(+)

>   create mode 100644 drivers/gpu/drm/tiny/ili9163.c

> 

> diff --git a/drivers/gpu/drm/tiny/Kconfig b/drivers/gpu/drm/tiny/Kconfig

> index 2b6414f0fa759..9de0c0eeea6f5 100644

> --- a/drivers/gpu/drm/tiny/Kconfig

> +++ b/drivers/gpu/drm/tiny/Kconfig

> @@ -41,6 +41,19 @@ config TINYDRM_HX8357D

>   

>   	  If M is selected the module will be called hx8357d.

>   

> +config TINYDRM_ILI9163

> +	tristate "DRM support for ILI9163 display panels"

> +	depends on DRM && SPI

> +	select DRM_KMS_HELPER

> +	select DRM_KMS_CMA_HELPER

> +	select DRM_MIPI_DBI

> +	select BACKLIGHT_CLASS_DEVICE


Maybe sort the selects alphabetically.

> +	help

> +	  DRM driver for the following Ilitek ILI9163 panels:

> +	  * NHD-1.8-128160EF 128x160 TFT

> +

> +	  If M is selected the module will be called ili9163.

> +

>   config TINYDRM_ILI9225

>   	tristate "DRM support for ILI9225 display panels"

>   	depends on DRM && SPI

> diff --git a/drivers/gpu/drm/tiny/Makefile b/drivers/gpu/drm/tiny/Makefile

> index 6ae4e9e5a35fb..78016b2ed11b5 100644

> --- a/drivers/gpu/drm/tiny/Makefile

> +++ b/drivers/gpu/drm/tiny/Makefile

> @@ -3,6 +3,7 @@

>   obj-$(CONFIG_DRM_CIRRUS_QEMU)		+= cirrus.o

>   obj-$(CONFIG_DRM_GM12U320)		+= gm12u320.o

>   obj-$(CONFIG_TINYDRM_HX8357D)		+= hx8357d.o

> +obj-$(CONFIG_TINYDRM_ILI9163)		+= ili9163.o

>   obj-$(CONFIG_TINYDRM_ILI9225)		+= ili9225.o

>   obj-$(CONFIG_TINYDRM_ILI9341)		+= ili9341.o

>   obj-$(CONFIG_TINYDRM_ILI9486)		+= ili9486.o

> diff --git a/drivers/gpu/drm/tiny/ili9163.c b/drivers/gpu/drm/tiny/ili9163.c

> new file mode 100644

> index 0000000000000..6fa9e59b69321

> --- /dev/null

> +++ b/drivers/gpu/drm/tiny/ili9163.c

> @@ -0,0 +1,224 @@

> +// SPDX-License-Identifier: GPL-2.0+

> +

> +#include <linux/backlight.h>

> +#include <linux/delay.h>

> +#include <linux/gpio/consumer.h>

> +#include <linux/module.h>

> +#include <linux/property.h>

> +#include <linux/spi/spi.h>

> +

> +#include <drm/drm_atomic_helper.h>

> +#include <drm/drm_drv.h>

> +#include <drm/drm_fb_helper.h>

> +#include <drm/drm_gem_cma_helper.h>

> +#include <drm/drm_gem_framebuffer_helper.h>

> +#include <drm/drm_mipi_dbi.h>

> +#include <drm/drm_modeset_helper.h>

> +#include <video/mipi_display.h>

> +

> +#define ILI9163_FRMCTR1		0xb1

> +

> +#define ILI9163_PWCTRL1		0xc0

> +#define ILI9163_PWCTRL2		0xc1

> +#define ILI9163_VMCTRL1		0xc5

> +#define ILI9163_VMCTRL2		0xc7

> +#define ILI9163_PWCTRLA		0xcb

> +#define ILI9163_PWCTRLB		0xcf

> +

> +#define ILI9163_EN3GAM		0xf2

> +

> +#define ILI9163_MADCTL_BGR	BIT(3)

> +#define ILI9163_MADCTL_MV	BIT(5)

> +#define ILI9163_MADCTL_MX	BIT(6)

> +#define ILI9163_MADCTL_MY	BIT(7)

> +

> +static void yx240qv29_enable(struct drm_simple_display_pipe *pipe,

> +			     struct drm_crtc_state *crtc_state,

> +			     struct drm_plane_state *plane_state)

> +{

> +	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);

> +	struct mipi_dbi *dbi = &dbidev->dbi;

> +	u8 addr_mode;

> +	int ret, idx;

> +

> +	if (!drm_dev_enter(pipe->crtc.dev, &idx))

> +		return;

> +

> +	drm_dbg_kms(&dbidev->drm, "\n");

> +

> +	ret = mipi_dbi_poweron_conditional_reset(dbidev);

> +	if (ret < 0)

> +		goto out_exit;

> +	if (ret == 1)


I'm not sure about the exact coding style, 'else if' seems better here.

> +		goto out_enable;

> +

> +	/* Gamma */

> +	mipi_dbi_command(dbi, MIPI_DCS_SET_GAMMA_CURVE, 0x04);

> +	mipi_dbi_command(dbi, ILI9163_EN3GAM, 0x00);

> +

> +	/* Frame Rate */

> +	mipi_dbi_command(dbi, ILI9163_FRMCTR1, 0x0a, 0x14);

> +

> +	/* Power Control */

> +	mipi_dbi_command(dbi, ILI9163_PWCTRL1, 0x0a, 0x00);

> +	mipi_dbi_command(dbi, ILI9163_PWCTRL2, 0x02);

> +

> +	/* VCOM */

> +	mipi_dbi_command(dbi, ILI9163_VMCTRL1, 0x2f, 0x3e);

> +	mipi_dbi_command(dbi, ILI9163_VMCTRL2, 0x40);

> +

> +	/* Memory Access Control */

> +	mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT);

> +

> +	mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);

> +	msleep(100);

> +

> +	mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);

> +	msleep(100);

> +

> +out_enable:

> +	switch (dbidev->rotation) {

> +	default:

> +		addr_mode = 0;

> +		break;

> +	case 90:

> +		addr_mode = ILI9163_MADCTL_MV | ILI9163_MADCTL_MX;

> +		break;

> +	case 180:

> +		addr_mode = ILI9163_MADCTL_MX | ILI9163_MADCTL_MY;

> +		break;

> +	case 270:

> +		addr_mode = ILI9163_MADCTL_MV | ILI9163_MADCTL_MY;

> +		break;

> +	}

> +	addr_mode |= ILI9163_MADCTL_BGR;

> +	mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);

> +	mipi_dbi_enable_flush(dbidev, crtc_state, plane_state);

> +out_exit:

> +	drm_dev_exit(idx);

> +}

> +

> +static const struct drm_simple_display_pipe_funcs ili9163_pipe_funcs = {

> +	.enable = yx240qv29_enable,

> +	.disable = mipi_dbi_pipe_disable,

> +	.update = mipi_dbi_pipe_update,

> +	.prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,

> +};

> +

> +static const struct drm_display_mode yx240qv29_mode = {

> +	DRM_SIMPLE_MODE(128, 160, 28, 35),

> +};

> +

> +DEFINE_DRM_GEM_CMA_FOPS(ili9163_fops);

> +

> +static struct drm_driver ili9163_driver = {

> +	DRM_GEM_CMA_DRIVER_OPS_VMAP,

> +	.date			= "20210208",

> +	.debugfs_init		= mipi_dbi_debugfs_init,

> +	.desc			= "Ilitek ILI9163",

> +	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,

> +	.fops			= &ili9163_fops,

> +	.major			= 1,

> +	.minor			= 0,

> +	.name			= "ili9163",

> +};

> +

> +static const struct of_device_id ili9163_of_match[] = {

> +	{ .compatible = "newhaven,1.8-128160EF" },

> +	{ }

> +};

> +MODULE_DEVICE_TABLE(of, ili9163_of_match);

> +

> +static const struct spi_device_id ili9163_id[] = {

> +	{ "nhd-1.8-128160EF", 0 },

> +	{ }

> +};

> +MODULE_DEVICE_TABLE(spi, ili9163_id);

> +

> +static int ili9163_probe(struct spi_device *spi)

> +{

> +	struct device *dev = &spi->dev;

> +	struct mipi_dbi_dev *dbidev;

> +	struct drm_device *drm;

> +	struct mipi_dbi *dbi;

> +	struct gpio_desc *dc;

> +	u32 rotation = 0;

> +	int ret;

> +

> +	dbidev = devm_drm_dev_alloc(dev, &ili9163_driver,

> +				    struct mipi_dbi_dev, drm);

> +	if (IS_ERR(dbidev))

> +		return PTR_ERR(dbidev);

> +

> +	dbi = &dbidev->dbi;

> +	drm = &dbidev->drm;

> +

> +	dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);

> +	if (IS_ERR(dbi->reset)) {

> +		drm_err(drm, "Failed to get gpio 'reset'\n");

> +		return PTR_ERR(dbi->reset);

> +	}

> +

> +	dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW);

> +	if (IS_ERR(dc)) {

> +		drm_err(drm, "Failed to get gpio 'dc'\n");

> +		return PTR_ERR(dc);

> +	}

> +

> +	dbidev->backlight = devm_of_find_backlight(dev);

> +	if (IS_ERR(dbidev->backlight))

> +		return PTR_ERR(dbidev->backlight);

> +

> +	device_property_read_u32(dev, "rotation", &rotation);

> +

> +	ret = mipi_dbi_spi_init(spi, dbi, dc);

> +	if (ret)

> +		return ret;

> +

> +	ret = mipi_dbi_dev_init(dbidev, &ili9163_pipe_funcs, &yx240qv29_mode, rotation);

> +	if (ret)

> +		return ret;

> +

> +	drm_mode_config_reset(drm);

> +

> +	ret = drm_dev_register(drm, 0);

> +	if (ret)

> +		return ret;

> +

> +	drm_fbdev_generic_setup(drm, 0);

> +

> +	spi_set_drvdata(spi, drm);


Better set the drvdata directly after devm_drm_dev_alloc() just in case 
some command during init wants that value.

> +

> +	return 0;

> +}

> +

> +static int ili9163_remove(struct spi_device *spi)

> +{

> +	struct drm_device *drm = spi_get_drvdata(spi);

> +

> +	drm_dev_unplug(drm);

> +	drm_atomic_helper_shutdown(drm);

> +

> +	return 0;

> +}

> +

> +static void ili9163_shutdown(struct spi_device *spi)

> +{

> +	drm_atomic_helper_shutdown(spi_get_drvdata(spi));

> +}

> +

> +static struct spi_driver ili9163_spi_driver = {

> +	.driver = {

> +		.name = "ili9163",

> +		.of_match_table = ili9163_of_match,

> +	},

> +	.id_table = ili9163_id,

> +	.probe = ili9163_probe,

> +	.remove = ili9163_remove,

> +	.shutdown = ili9163_shutdown,

> +};

> +module_spi_driver(ili9163_spi_driver);

> +

> +MODULE_DESCRIPTION("Ilitek ILI9163 DRM driver");

> +MODULE_AUTHOR("Daniel Mack <daniel@zonque.org>");

> +MODULE_LICENSE("GPL");

> 


-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer