| Message ID | 20210119092109.185282-1-bert@biot.com |
|---|---|
| Headers | show |
| Series | Add support for Realtek RTL838x/RTL839x switch SoCs | expand |
On Tue, Jan 19, 2021 at 10:21:04AM +0100, Bert Vermeulen wrote: > v4: > - Device tree bindings for SoC in separate patch. > - Removed ioremap.h, and declare physical address bases in device tree. > > v3: > - all code removed, the base system is now only device tree files and docs > and some build config. > - ioremap.h restored to the v1 version, with hardcoded I/O ranges, since I > got flak on changing that as suggested. This brings it in line with other > systems in arch/mips/generic. > > v2: > - Removed all new arch/mips/ code, using arch/mips/generic/ instead. > - Use device tree ranges instead of hardcoded addresses for ioremap. > - Moved IRQ driver to drivers/irqchip/ > - Removed reset handling code, will be replaced by device tree config. > - All SoC family id code moved to new soc driver. > - Header moved to realtek/ instead of mach-realtek/ > - As more of the base system now depends on device tree, a sample > dts for the Cisco SG220-26 switch is included. This will be further > filled out, and bindings documented, as drivers get merged. > > Bert Vermeulen (5): > dt-bindings: mips: Add support for RTL83xx SoC series > Add support for Realtek RTL838x/RTL839x switch SoCs > MIPS: Add Realtek RTL838x/RTL839x support as generic MIPS system > dt-bindings: Add Cisco prefix to vendor list > mips: dts: Add support for Cisco SG220-26 switch > > .../devicetree/bindings/mips/realtek-rtl.yaml | 24 ++++++++ > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > arch/mips/Kconfig | 31 ++++++++++ > arch/mips/boot/dts/Makefile | 1 + > arch/mips/boot/dts/realtek/Makefile | 2 + > arch/mips/boot/dts/realtek/cisco_sg220-26.dts | 25 ++++++++ > arch/mips/boot/dts/realtek/rtl838x.dtsi | 21 +++++++ > arch/mips/boot/dts/realtek/rtl83xx.dtsi | 59 +++++++++++++++++++ > 8 files changed, 165 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mips/realtek-rtl.yaml > create mode 100644 arch/mips/boot/dts/realtek/Makefile > create mode 100644 arch/mips/boot/dts/realtek/cisco_sg220-26.dts > create mode 100644 arch/mips/boot/dts/realtek/rtl838x.dtsi > create mode 100644 arch/mips/boot/dts/realtek/rtl83xx.dtsi series applied to mips-next. Thomas. -- Crap can work. Given enough thrust pigs will fly, but it's not necessarily a good idea. [ RFC1925, 2.3 ]