mbox series

[0/9] Config and devicetree updates for the Librem 5 phone

Message ID 20210112095151.4995-1-martin.kepplinger@puri.sm
Headers show
Series Config and devicetree updates for the Librem 5 phone | expand

Message

Martin Kepplinger Jan. 12, 2021, 9:51 a.m. UTC 
This is another set of updates in order to maintain support for the
Librem 5 phone:

Guido Günther (5):
  arm64: defconfig: Enable vibra-pwm
  arm64: dts: imx8mq-librem5: Mark charger IRQ as High-Z
  arm64: dts: imx8mq-librem5: Don't mark buck3 as always on
  arm64: dts: imx8mq-librem5: Add usb-c chip as supplier for the charger
  arm64: dts: imx8mq-librem5: Add LCD_1V8 regulator

Martin Kepplinger (4):
  arm64: dts: imx8mq-librem5: enable the LCD panel
  arm64: dts: imx8mq-librem5: set regulators boot-on
  arm64: dts: Add Librem5 Evergreen
  dt-bindings: arm: fsl: Add the librem 5 Evergreen revision

 .../devicetree/bindings/arm/fsl.yaml          |  1 +
 arch/arm64/boot/dts/freescale/Makefile        |  1 +
 .../boot/dts/freescale/imx8mq-librem5-r4.dts  | 35 ++++++++
 .../boot/dts/freescale/imx8mq-librem5.dtsi    | 83 ++++++++++++++++++-
 arch/arm64/configs/defconfig                  |  1 +
 5 files changed, 117 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts

Comments

Krzysztof Kozlowski Jan. 13, 2021, 4:15 a.m. UTC | #1 
On Tue, Jan 12, 2021 at 10:51:43AM +0100, Martin Kepplinger wrote:
> From: Guido Günther <agx@sigxcpu.org>

> 

> The haptic motor for the Librem 5 uses this.

> 

> Signed-off-by: Guido Günther <agx@sigxcpu.org>

> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>

> ---

>  arch/arm64/configs/defconfig | 1 +

>  1 file changed, 1 insertion(+)

> 


Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>


Best regards,
Krzysztof
Krzysztof Kozlowski Jan. 13, 2021, 4:16 a.m. UTC | #2 
On Tue, Jan 12, 2021 at 10:51:44AM +0100, Martin Kepplinger wrote:
> From: Guido Günther <agx@sigxcpu.org>

> 

> This is consistent with other IRQs and makes keeps currents low.

> 

> Signed-off-by: Guido Günther <agx@sigxcpu.org>

> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>

> ---

>  arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +-

>  1 file changed, 1 insertion(+), 1 deletion(-)

> 


Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>


Best regards,
Krzysztof