mbox series

[v3,00/15] PHY: Add support in Sierra to use external clock

Message ID 20201224111627.32590-1-kishon@ti.com
Headers show
Series PHY: Add support in Sierra to use external clock | expand

Message

Kishon Vijay Abraham I Dec. 24, 2020, 11:16 a.m. UTC 
Patch series adds support in Sierra driver to use external clock.

v1 of the patch series can be found @ [1]
v2 of the patch series can be found @ [2]

Changes from v2:
1) Add depends on COMMON_CLK in Sierra
2) Add modelling PLL_CMNLC and PLL_CMNLC1 as clocks into a separate
patch
3) Disable clocks in Sierra driver remove

Changes from v1:
1) Remove the part that prevents configuration if the SERDES is already
   configured and focus only on using external clock and the associated
   cleanups
2) Change patch ordering
3) Use exclusive reset control APIs
4) Fix error handling code
5) Include DT patches in this series (I can send this separately to DT
MAINTAINER once the driver patches are merged)

[1] -> http://lore.kernel.org/r/20201103035556.21260-1-kishon@ti.com
[2] -> http://lore.kernel.org/r/20201222070520.28132-1-kishon@ti.com

Kishon Vijay Abraham I (15):
  phy: cadence: Sierra: Fix PHY power_on sequence
  phy: ti: j721e-wiz: Invoke wiz_init() before
    of_platform_device_create()
  dt-bindings: phy: cadence-sierra: Add bindings for the PLLs within
    SERDES
  phy: ti: j721e-wiz: Get PHY properties only for "phy" or "link"
    subnode
  phy: cadence: cadence-sierra: Create PHY only for "phy" or "link"
    sub-nodes
  phy: cadence: cadence-sierra: Move all clk_get_*() to a separate
    function
  phy: cadence: cadence-sierra: Move all reset_control_get*() to a
    separate function
  phy: cadence: cadence-sierra: Explicitly request exclusive reset
    control
  phy: cadence: sierra: Model reference receiver as clocks (gate clocks)
  phy: cadence: sierra: Model PLL_CMNLC and PLL_CMNLC1 as clocks (mux
    clocks)
  phy: cadence: sierra: Enable pll_cmnlc and pll_cmnlc1 clocks
  arm64: dts: ti: k3-j721e-main: Add DT nodes for clocks within Sierra
    SERDES
  arm64: dts: ti: k3-j721e-main: Fix external refclk input to SERDES
  arm64: dts: ti: k3-j721e-common-proc-board: Use external clock for
    SERDES
  arm64: dts: ti: k3-j721e-common-proc-board: Re-name "link" name as
    "phy"

 .../bindings/phy/phy-cadence-sierra.yaml      |  89 ++-
 .../dts/ti/k3-j721e-common-proc-board.dts     |  57 +-
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 186 ++++--
 drivers/phy/cadence/Kconfig                   |   1 +
 drivers/phy/cadence/phy-cadence-sierra.c      | 544 ++++++++++++++++--
 drivers/phy/ti/phy-j721e-wiz.c                |  21 +-
 6 files changed, 810 insertions(+), 88 deletions(-)

-- 
2.17.1