mbox series

[v2,00/14] PHY: Add support in Sierra to use external clock

Message ID 20201222070520.28132-1-kishon@ti.com
Headers show
Series PHY: Add support in Sierra to use external clock | expand

Message

Kishon Vijay Abraham I Dec. 22, 2020, 7:05 a.m. UTC
The previous version of the patch series can be found @ [1]

Changes from v1:
1) Remove the part that prevents configuration if the SERDES is already
   configured and focus only on using external clock and the associated
   cleanups
2) Change patch ordering
3) Use exclusive reset control APIs
4) Fix error handling code
5) Include DT patches in this series (I can send this separately to DT
MAINTAINER once the driver patches are merged)

[1] -> http://lore.kernel.org/r/20201103035556.21260-1-kishon@ti.com

Kishon Vijay Abraham I (14):
  phy: cadence: Sierra: Fix PHY power_on sequence
  phy: ti: j721e-wiz: Invoke wiz_init() before
    of_platform_device_create()
  dt-bindings: phy: cadence-sierra: Add bindings for the PLLs within
    SERDES
  phy: ti: j721e-wiz: Get PHY properties only for "phy" or "link"
    subnode
  phy: cadence: cadence-sierra: Create PHY only for "phy" or "link"
    sub-nodes
  phy: cadence: cadence-sierra: Move all clk_get_*() to a separate
    function
  phy: cadence: cadence-sierra: Move all reset_control_get*() to a
    separate function
  phy: cadence: cadence-sierra: Explicitly request exclusive reset
    control
  phy: cadence: sierra: Model reference receiver as clocks (gate clocks)
  phy: cadence: sierra: Enable pll_cmnlc and pll_cmnlc1 clocks
  arm64: dts: ti: k3-j721e-main: Add DT nodes for clocks within Sierra
    SERDES
  arm64: dts: ti: k3-j721e-main: Fix external refclk input to SERDES
  arm64: dts: ti: k3-j721e-common-proc-board: Use external clock for
    SERDES
  arm64: dts: ti: k3-j721e-common-proc-board: Re-name "link" name as
    "phy"

 .../bindings/phy/phy-cadence-sierra.yaml      |  89 ++-
 .../dts/ti/k3-j721e-common-proc-board.dts     |  57 +-
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 186 ++++--
 drivers/phy/cadence/phy-cadence-sierra.c      | 543 ++++++++++++++++--
 drivers/phy/ti/phy-j721e-wiz.c                |  21 +-
 5 files changed, 808 insertions(+), 88 deletions(-)

-- 
2.17.1

Comments

Kishon Vijay Abraham I Jan. 25, 2021, 11:31 a.m. UTC | #1
On 22/12/20 12:35 pm, Kishon Vijay Abraham I wrote:
> The previous version of the patch series can be found @ [1]

> 

> Changes from v1:

> 1) Remove the part that prevents configuration if the SERDES is already

>    configured and focus only on using external clock and the associated

>    cleanups

> 2) Change patch ordering

> 3) Use exclusive reset control APIs

> 4) Fix error handling code

> 5) Include DT patches in this series (I can send this separately to DT

> MAINTAINER once the driver patches are merged)

> 

> [1] -> http://lore.kernel.org/r/20201103035556.21260-1-kishon@ti.com

> 

I have couple of reports from kernel test robot. If there are any other
comments on this series, I can fix them.

Thanks
Kishon

> Kishon Vijay Abraham I (14):

>   phy: cadence: Sierra: Fix PHY power_on sequence

>   phy: ti: j721e-wiz: Invoke wiz_init() before

>     of_platform_device_create()

>   dt-bindings: phy: cadence-sierra: Add bindings for the PLLs within

>     SERDES

>   phy: ti: j721e-wiz: Get PHY properties only for "phy" or "link"

>     subnode

>   phy: cadence: cadence-sierra: Create PHY only for "phy" or "link"

>     sub-nodes

>   phy: cadence: cadence-sierra: Move all clk_get_*() to a separate

>     function

>   phy: cadence: cadence-sierra: Move all reset_control_get*() to a

>     separate function

>   phy: cadence: cadence-sierra: Explicitly request exclusive reset

>     control

>   phy: cadence: sierra: Model reference receiver as clocks (gate clocks)

>   phy: cadence: sierra: Enable pll_cmnlc and pll_cmnlc1 clocks

>   arm64: dts: ti: k3-j721e-main: Add DT nodes for clocks within Sierra

>     SERDES

>   arm64: dts: ti: k3-j721e-main: Fix external refclk input to SERDES

>   arm64: dts: ti: k3-j721e-common-proc-board: Use external clock for

>     SERDES

>   arm64: dts: ti: k3-j721e-common-proc-board: Re-name "link" name as

>     "phy"

> 

>  .../bindings/phy/phy-cadence-sierra.yaml      |  89 ++-

>  .../dts/ti/k3-j721e-common-proc-board.dts     |  57 +-

>  arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 186 ++++--

>  drivers/phy/cadence/phy-cadence-sierra.c      | 543 ++++++++++++++++--

>  drivers/phy/ti/phy-j721e-wiz.c                |  21 +-

>  5 files changed, 808 insertions(+), 88 deletions(-)

>