mbox series

[v2,0/2] phy: intel: Add Keem Bay USB PHY support

Message ID 20201109031654.22443-1-wan.ahmad.zainie.wan.mohamad@intel.com
Headers show
Series phy: intel: Add Keem Bay USB PHY support | expand

Message

Wan Ahmad Zainie Nov. 9, 2020, 3:16 a.m. UTC 
Hi.

Intel Keem Bay USB subsystem incorporates DesignWare USB3.1 controller,
an USB3.1 (Gen1/2) PHY and an USB2.0 PHY. It is a Dual Role Device
(DRD), operating as either a USB host or a USB device.

The patchset is tested on Keem Bay EVM.

Thank you.

Best regards,
Zainie

Changes since v1:
- Remove 2 patches that had been merged. Reduced To, Cc list.
- Rebased to v5.10-rc3.
- Add Rob's Reviewed-by tag in the first patch.
- Use ARCH_KEEMBAY in Kconfig.
- Update #include header; remove <linux/of_address.h>, and add
  <linux/bits.h>.
- Remove unnecessary comments.

Note: I resend this v2 as my previous v2 sent on Oct 28 not seen
in mailing lists.


Wan Ahmad Zainie (2):
  dt-bindings: phy: Add Intel Keem Bay USB PHY bindings
  phy: intel: Add Keem Bay USB PHY support

 .../bindings/phy/intel,phy-keembay-usb.yaml   |  44 +++
 drivers/phy/intel/Kconfig                     |  12 +
 drivers/phy/intel/Makefile                    |   1 +
 drivers/phy/intel/phy-intel-keembay-usb.c     | 288 ++++++++++++++++++
 4 files changed, 345 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/intel,phy-keembay-usb.yaml
 create mode 100644 drivers/phy/intel/phy-intel-keembay-usb.c