mbox series

[0/6] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts

Message ID 20200524023815.21789-1-jonathan@marek.ca
Headers show
Series arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts | expand

Message

Jonathan Marek May 24, 2020, 2:38 a.m. UTC 
Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.

Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
few changes. Notably, the HDK865 dts has regulator config changed a bit based
on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).

Jonathan Marek (6):
  arm64: dts: qcom: sm8150: add apps_smmu node
  arm64: dts: qcom: sm8250: add apps_smmu node
  arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
  arm64: dts: qcom: sm8250: Add USB and PHY device nodes
  arm64: dts: qcom: add sm8150 hdk dts
  arm64: dts: qcom: add sm8250 hdk dts

 arch/arm64/boot/dts/qcom/Makefile       |   2 +
 arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 461 ++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8150.dtsi    | 180 +++++++++
 arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8250.dtsi    | 287 +++++++++++++++
 5 files changed, 1384 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts