mbox series

[v2,0/4] clk: qcom: gdsc: Handle supply regulators

Message ID 20200417070044.1376212-1-bjorn.andersson@linaro.org
Headers show
Series clk: qcom: gdsc: Handle supply regulators | expand

Message

Bjorn Andersson April 17, 2020, 7 a.m. UTC 
Handle supply regulators for GDSCs to allow probe deferral when regulators are
not yet present/enabled and to allow the GDSC to enable/disable dependencies as
needed.

Bjorn Andersson (3):
  clk: qcom: gdsc: Handle GDSC regulator supplies
  clk: qcom: mmcc-msm8996: Properly describe GPU_GX gdsc
  arm64: dts: qcom: msm8996: Make GPU node control GPU_GX GDSC

Rajendra Nayak (1):
  arm64: dts: qcom: db820c: Add vdd_gfx and tie it into mmcc

 .../devicetree/bindings/clock/qcom,mmcc.yaml  |  4 ++++
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi  | 14 +++++++++++
 arch/arm64/boot/dts/qcom/msm8996.dtsi         |  2 +-
 arch/arm64/boot/dts/qcom/pmi8994.dtsi         |  6 +++++
 drivers/clk/qcom/gdsc.c                       | 23 +++++++++++++++++++
 drivers/clk/qcom/gdsc.h                       |  4 ++++
 drivers/clk/qcom/mmcc-msm8996.c               |  2 ++
 7 files changed, 54 insertions(+), 1 deletion(-)