mbox series

[0/4] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's

Message ID 20200313141545.31943-1-alcooperx@gmail.com
Headers show
Series Add XHCI, EHCI and OHCI support for Broadcom STB SoS's | expand

Message

Alan Cooper March 13, 2020, 2:15 p.m. UTC
This adds support for the XHCI, EHCI and OHCI host controllers found
in Broadcom STB SoC's. These drivers depend on getting access to the
new Broadcom STB USB PHY driver through a device-tree phandle and
will fail if the driver is not available.

Al Cooper (4):
  dt-bindings: Add Broadcom STB USB support
  usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
  usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  usb: host: Add ability to build new Broadcom STB USB drivers

 .../bindings/usb/brcm,bcm7445-ehci.yaml       |  60 ++++
 .../devicetree/bindings/usb/usb-xhci.txt      |   1 +
 MAINTAINERS                                   |   9 +
 drivers/usb/host/Kconfig                      |  20 ++
 drivers/usb/host/Makefile                     |  20 +-
 drivers/usb/host/ehci-brcm.c                  | 288 ++++++++++++++++++
 drivers/usb/host/xhci-brcm.c                  |  16 +
 drivers/usb/host/xhci-brcm.h                  |  16 +
 drivers/usb/host/xhci-plat.c                  |  11 +
 9 files changed, 435 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
 create mode 100644 drivers/usb/host/ehci-brcm.c
 create mode 100644 drivers/usb/host/xhci-brcm.c
 create mode 100644 drivers/usb/host/xhci-brcm.h