mbox series

[v2,0/2] clk: keystone: Add new driver to handle ehrpwm tbclk

Message ID 20200207044425.32398-1-vigneshr@ti.com
Headers show
Series clk: keystone: Add new driver to handle ehrpwm tbclk | expand

Message

Vignesh Raghavendra Feb. 7, 2020, 4:44 a.m. UTC 
On TI's AM654 and J721e SoCs, certain clocks can be gated/ungated by setting a
single bit in SoC's System Control registers. Sometime more than
one clock control can be in the same register. But these registers might
also have bits to control other SoC functionalities.
For example, Time Base clock(TBclk) enable bits for various EPWM IPs are
all in EPWM_CTRL Syscon registers on K2G SoC.

This series adds a new clk driver to support controlling tbclk. Registers
which control clocks will be grouped into a syscon DT node, thus
enabling sharing of register across clk drivers and other drivers.

v2:
Simplify driver to have only one clock node per group of syscon
controller registers instead of one per clock instance.

v1: https://patchwork.kernel.org/cover/10848783/

Vignesh Raghavendra (2):
  dt-bindings: clock: Add binding documentation for TI syscon gate clock
  clk: keystone: Add new driver to handle syscon based clocks

 .../bindings/clock/ti,am654-ehrpwm-tbclk.yaml |  47 +++++
 drivers/clk/keystone/Kconfig                  |   8 +
 drivers/clk/keystone/Makefile                 |   1 +
 drivers/clk/keystone/syscon-clk.c             | 177 ++++++++++++++++++
 4 files changed, 233 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
 create mode 100644 drivers/clk/keystone/syscon-clk.c