mbox series

[v4,00/14] PHY: Add support for SERDES in TI's J721E SoC

Message ID 20191216095712.13266-1-kishon@ti.com
Headers show
Series PHY: Add support for SERDES in TI's J721E SoC | expand

Message

Kishon Vijay Abraham I Dec. 16, 2019, 9:56 a.m. UTC 
TI's J721E SoC uses Cadence Sierra SERDES for USB, PCIe and SGMII.
TI has a wrapper named WIZ to control input signals to Sierra and
Torrent SERDES.

This patch series:
 1) Add support to WIZ module present in TI's J721E SoC
 2) Adapt Cadence Sierra PHY driver to be used for J721E SoC

Changes from v3:
 *) Fix Rob's comments on dt bindings
        -> Add properties to be added in WIZ child nodes to binding
        -> Use '-' rather than '_' in node names

Changes from v2:
 *) Deprecate "phy_clk" binding
 *) Fix Rob's comment on dt bindings
        -> Include BSD-2-Clause license identifier
        -> drop "oneOf" and "items" for compatible
        -> Fixed "num-lanes" to include only scalar keywords
        -> Change to 32-bit address space for child nodes
*) Rename cmn_refclk/cmn_refclk1 to cmn_refclk_dig_div/
   cmn_refclk1_dig_div

Changes from v1:
 *) Change the dt binding Documentation of WIZ wrapper to YAML format
 *) Fix an issue in Sierra while doimg rmmod

The series has also been pushed to
https://github.com/kishon/linux-wip.git j7_serdes_v4

Anil Varughese (1):
  phy: cadence: Sierra: Configure both lane cdb and common cdb registers
    for external SSC

Kishon Vijay Abraham I (13):
  dt-bindings: phy: Sierra: Add bindings for Sierra in TI's J721E
  phy: cadence: Sierra: Make "phy_clk" and "sierra_apb" optional
    resources
  phy: cadence: Sierra: Use "regmap" for read and write to Sierra
    registers
  phy: cadence: Sierra: Add support for SERDES_16G used in J721E SoC
  phy: cadence: Sierra: Make cdns_sierra_phy_init() as phy_ops
  phy: cadence: Sierra: Modify register macro names to be in sync with
    Sierra user guide
  phy: cadence: Sierra: Get reset control "array" for each link
  phy: cadence: Sierra: Check for PLL lock during PHY power on
  phy: cadence: Sierra: Change MAX_LANES of Sierra to 16
  phy: cadence: Sierra: Set cmn_refclk_dig_div/cmn_refclk1_dig_div
    frequency to 25MHz
  phy: cadence: Sierra: Use correct dev pointer in
    cdns_sierra_phy_remove()
  dt-bindings: phy: Document WIZ (SERDES wrapper) bindings
  phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC

 .../bindings/phy/phy-cadence-sierra.txt       |  13 +-
 .../bindings/phy/ti,phy-j721e-wiz.yaml        | 204 ++++
 drivers/phy/cadence/phy-cadence-sierra.c      | 699 +++++++++++---
 drivers/phy/ti/Kconfig                        |  15 +
 drivers/phy/ti/Makefile                       |   1 +
 drivers/phy/ti/phy-j721e-wiz.c                | 898 ++++++++++++++++++
 6 files changed, 1691 insertions(+), 139 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
 create mode 100644 drivers/phy/ti/phy-j721e-wiz.c

-- 
2.17.1