| Message ID | 20190522161921.20750-1-nm@ti.com |
|---|---|
| Headers | show |
| Series | arm64: Initial support Texas Instrument's J721E Platform | expand |
Hi Nishanth, Tero, On 5/22/19 11:19 AM, Nishanth Menon wrote: > The J721E SoC belongs to the K3 Multicore SoC architecture platform, > providing advanced system integration to enable lower system costs > of automotive applications such as infotainment, cluster, premium > Audio, Gateway, industrial and a range of broad market applications. > This SoC is designed around reducing the system cost by eliminating > the need of an external system MCU and is targeted towards ASIL-B/C > certification/requirements in addition to allowing complex software > and system use-cases. > > Some highlights of this SoC are: > * Dual Cortex-A72s in a single cluster, three clusters of lockstep > capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), > C7x floating point Vector DSP, Two C66x floating point DSPs. > * 3D GPU PowerVR Rogue 8XE GE8430 > * Vision Processing Accelerator (VPAC) with image signal processor and Depth > and Motion Processing Accelerator (DMPAC) > * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual > PRUs and dual RTUs > * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and > up to two DPI interfaces. > * Integrated Ethernet switch supporting up to a total of 8 external ports in > addition to legacy Ethernet switch of up to 2 ports. > * System MMU (SMMU) Version 3.0 and advanced virtualisation > capabilities. > * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, > 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, > I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. > * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL > management. > * Configurable L3 Cache and IO-coherent architecture with high data throughput > capable distributed DMA architecture under NAVSS > * Centralized System Controller for Security, Power, and Resource > Management (DMSC) > > See J721E Technical Reference Manual (SPRUIL1, May 2019) > for further details: http://www.ti.com/lit/pdf/spruil1 > > Signed-off-by: Nishanth Menon <nm@ti.com> > --- > arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 202 ++++++++++++++++++ > .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 72 +++++++ > arch/arm64/boot/dts/ti/k3-j721e.dtsi | 176 +++++++++++++++ > 3 files changed, 450 insertions(+) > create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi > create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi > create mode 100644 arch/arm64/boot/dts/ti/k3-j721e.dtsi > > diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi > new file mode 100644 > index 000000000000..d42912044a5d > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi > @@ -0,0 +1,202 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for J721E SoC Family Main Domain peripherals > + * > + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ > + */ > + > +&cbass_main { > + msmc_ram: sram@70000000 { > + compatible = "mmio-sram"; > + reg = <0x0 0x70000000 0x0 0x800000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x0 0x70000000 0x800000>; > + > + atf-sram@0 { > + reg = <0x0 0x20000>; > + }; > + }; > + > + gic500: interrupt-controller@1800000 { > + compatible = "arm,gic-v3"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ > + <0x00 0x01900000 0x00 0x100000>; /* GICR */ > + > + /* vcpumntirq: virtual CPU interface maintenance interrupt */ > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + > + gic_its: gic-its@18200000 { > + compatible = "arm,gic-v3-its"; > + reg = <0x00 0x01820000 0x00 0x10000>; > + socionext,synquacer-pre-its = <0x1000000 0x400000>; > + msi-controller; > + #msi-cells = <1>; > + }; > + }; > + > + smmu0: smmu@36600000 { > + compatible = "arm,smmu-v3"; > + reg = <0x0 0x36600000 0x0 0x100000>; > + interrupt-parent = <&gic500>; > + interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "eventq", "gerror"; > + #iommu-cells = <1>; > + }; > + > + secure_proxy_main: mailbox@32c00000 { > + compatible = "ti,am654-secure-proxy"; > + #mbox-cells = <1>; > + reg-names = "target_data", "rt", "scfg"; > + reg = <0x00 0x32c00000 0x00 0x100000>, > + <0x00 0x32400000 0x00 0x100000>, > + <0x00 0x32800000 0x00 0x100000>; > + interrupt-names = "rx_011"; > + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + main_pmx0: pinmux@11c000 { > + compatible = "pinctrl-single"; > + /* Proxy 0 addressing */ > + reg = <0x0 0x11c000 0x0 0x2b4>; > + #pinctrl-cells = <1>; > + pinctrl-single,register-width = <32>; > + pinctrl-single,function-mask = <0xffffffff>; > + }; > + > + main_uart0: serial@2800000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02800000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 146>; > + clocks = <&k3_clks 146 0>; > + clock-names = "fclk"; > + }; > + > + main_uart1: serial@2810000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02810000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 278>; > + clocks = <&k3_clks 278 0>; > + clock-names = "fclk"; > + }; > + > + main_uart2: serial@2820000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02820000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 279>; > + clocks = <&k3_clks 279 0>; > + clock-names = "fclk"; > + }; > + > + main_uart3: serial@2830000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02830000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 280>; > + clocks = <&k3_clks 280 0>; > + clock-names = "fclk"; > + }; > + > + main_uart4: serial@2840000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02840000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 281>; > + clocks = <&k3_clks 281 0>; > + clock-names = "fclk"; > + }; > + > + main_uart5: serial@2850000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02850000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 282>; > + clocks = <&k3_clks 282 0>; > + clock-names = "fclk"; > + }; > + > + main_uart6: serial@2860000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02860000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 283>; > + clocks = <&k3_clks 283 0>; > + clock-names = "fclk"; > + }; > + > + main_uart7: serial@2870000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02870000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 284>; > + clocks = <&k3_clks 284 0>; > + clock-names = "fclk"; > + }; > + > + main_uart8: serial@2880000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02880000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 285>; > + clocks = <&k3_clks 285 0>; > + clock-names = "fclk"; > + }; > + > + main_uart9: serial@2890000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x02890000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 286>; > + clocks = <&k3_clks 286 0>; > + clock-names = "fclk"; > + }; > +}; > diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi > new file mode 100644 > index 000000000000..b72e033fa159 > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi > @@ -0,0 +1,72 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals > + * > + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ > + */ > + > +&cbass_mcu_wakeup { > + dmsc: dmsc@44083000 { > + compatible = "ti,k2g-sci"; > + ti,host-id = <12>; > + > + mbox-names = "rx", "tx"; > + > + mboxes= <&secure_proxy_main 11>, > + <&secure_proxy_main 13>; > + > + reg-names = "debug_messages"; > + reg = <0x00 0x44083000 0x0 0x1000>; > + > + k3_pds: power-controller { > + compatible = "ti,sci-pm-domain"; > + #power-domain-cells = <1>; > + }; > + > + k3_clks: clocks { > + compatible = "ti,k2g-sci-clk"; > + #clock-cells = <2>; > + ti,scan-clocks-from-dt; > + }; > + > + k3_reset: reset-controller { > + compatible = "ti,sci-reset"; > + #reset-cells = <2>; > + }; > + }; > + > + wkup_pmx0: pinmux@4301c000 { > + compatible = "pinctrl-single"; > + /* Proxy 0 addressing */ > + reg = <0x00 0x4301c000 0x00 0x178>; > + #pinctrl-cells = <1>; > + pinctrl-single,register-width = <32>; > + pinctrl-single,function-mask = <0xffffffff>; > + }; > + > + wkup_uart0: serial@42300000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x42300000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <48000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 287>; > + clocks = <&k3_clks 287 0>; > + clock-names = "fclk"; > + }; > + > + mcu_uart0: serial@40a00000 { > + compatible = "ti,j721e-uart", "ti,am654-uart"; > + reg = <0x00 0x40a00000 0x00 0x100>; > + reg-shift = <2>; > + reg-io-width = <4>; > + interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <96000000>; > + current-speed = <115200>; > + power-domains = <&k3_pds 149>; > + clocks = <&k3_clks 149 0>; > + clock-names = "fclk"; > + }; > +}; > diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi > new file mode 100644 > index 000000000000..e7c366c98ce1 > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi > @@ -0,0 +1,176 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for J721E SoC Family > + * > + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ > + */ > + > +#include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/pinctrl/k3.h> > + > +/ { > + model = "Texas Instruments K3 J721E SoC"; > + compatible = "ti,j721e"; > + interrupt-parent = <&gic500>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + aliases { > + serial0 = &wkup_uart0; > + serial1 = &mcu_uart0; > + serial2 = &main_uart0; > + serial3 = &main_uart1; > + serial4 = &main_uart2; > + serial5 = &main_uart3; > + serial6 = &main_uart4; > + serial7 = &main_uart5; > + serial8 = &main_uart6; > + serial9 = &main_uart7; > + serial10 = &main_uart8; > + serial11 = &main_uart9; > + }; > + > + chosen { }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + cpu-map { > + cluster0: cluster0 { > + core0 { > + cpu = <&cpu0>; > + }; > + > + core1 { > + cpu = <&cpu1>; > + }; > + }; > + > + }; > + > + cpu0: cpu@0 { > + compatible = "arm,cortex-a72"; > + reg = <0x000>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0xC000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&L2_0>; > + }; > + > + cpu1: cpu@1 { > + compatible = "arm,cortex-a72"; > + reg = <0x001>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0xC000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&L2_0>; > + }; > + }; > + > + L2_0: l2-cache0 { > + compatible = "cache"; > + cache-level = <2>; > + cache-size = <0x100000>; > + cache-line-size = <64>; > + cache-sets = <2048>; > + next-level-cache = <&msmc_l3>; > + }; > + > + msmc_l3: l3-cache0 { > + compatible = "cache"; > + cache-level = <3>; > + }; > + > + firmware { > + optee { > + compatible = "linaro,optee-tz"; > + method = "smc"; > + }; > + > + psci: psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + }; > + > + a72_timer0: timer-cl0-cpu0 { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ > + }; > + > + pmu: pmu { > + compatible = "arm,armv8-pmuv3"; > + /* Recommendation from GIC500 TRM Table A.3 */ > + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + cbass_main: interconnect@100000 { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ > + <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ > + <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ > + <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */ > + <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ > + <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ > + <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/ > + <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ > + <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */ > + <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */ > + <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */ > + <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */ > + /* MCUSS_WKUP Range */ > + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, > + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, > + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, > + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, > + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, > + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, > + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, > + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, > + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, > + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, > + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, > + <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, minor nit, can we have this MSMC RAM range line moved to before the MCUSS_WKUP comment since it doesn't belong to the MCUSS range. Perhaps can be fixed up while applying the patch. Other than that, everything looks good. Reviewed-by: Suman Anna <s-anna@ti.com> regards Suman > + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, > + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; > + > + cbass_mcu_wakeup: interconnect@28380000 { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ > + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */ > + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ > + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ > + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ > + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */ > + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */ > + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ > + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ > + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */ > + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */ > + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */ > + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ > + }; > + }; > +}; > + > +/* Now include the peripherals for each bus segments */ > +#include "k3-j721e-main.dtsi" > +#include "k3-j721e-mcu-wakeup.dtsi" >
On Wed, 22 May 2019 11:19:16 -0500, Nishanth Menon wrote: > The J721E SoC belongs to the K3 Multicore SoC architecture platform, > providing advanced system integration to enable lower system costs > of automotive applications such as infotainment, cluster, premium > Audio, Gateway, industrial and a range of broad market applications. > This SoC is designed around reducing the system cost by eliminating > the need of an external system MCU and is targeted towards ASIL-B/C > certification/requirements in addition to allowing complex software > and system use-cases. > > Some highlights of this SoC are: > * Dual Cortex-A72s in a single cluster, three clusters of lockstep > capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), > C7x floating point Vector DSP, Two C66x floating point DSPs. > * 3D GPU PowerVR Rogue 8XE GE8430 > * Vision Processing Accelerator (VPAC) with image signal processor and Depth > and Motion Processing Accelerator (DMPAC) > * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual > PRUs and dual RTUs > * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and > up to two DPI interfaces. > * Integrated Ethernet switch supporting up to a total of 8 external ports in > addition to legacy Ethernet switch of up to 2 ports. > * System MMU (SMMU) Version 3.0 and advanced virtualisation > capabilities. > * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, > 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, > I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. > * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL > management. > * Configurable L3 Cache and IO-coherent architecture with high data throughput > capable distributed DMA architecture under NAVSS > * Centralized System Controller for Security, Power, and Resource > Management (DMSC) > > See J721E Technical Reference Manual (SPRUIL1, May 2019) > for further details: http://www.ti.com/lit/pdf/spruil1 > > Signed-off-by: Nishanth Menon <nm@ti.com> > --- > Documentation/devicetree/bindings/arm/ti/k3.txt | 3 +++ > 1 file changed, 3 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
On 10:45-20190614, Rob Herring wrote: > On Wed, May 22, 2019 at 11:19:16AM -0500, Nishanth Menon wrote: > > The J721E SoC belongs to the K3 Multicore SoC architecture platform, > > providing advanced system integration to enable lower system costs > > of automotive applications such as infotainment, cluster, premium > > Audio, Gateway, industrial and a range of broad market applications. > > This SoC is designed around reducing the system cost by eliminating > > the need of an external system MCU and is targeted towards ASIL-B/C > > certification/requirements in addition to allowing complex software > > and system use-cases. > > > > Some highlights of this SoC are: > > * Dual Cortex-A72s in a single cluster, three clusters of lockstep > > capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), > > C7x floating point Vector DSP, Two C66x floating point DSPs. > > * 3D GPU PowerVR Rogue 8XE GE8430 > > * Vision Processing Accelerator (VPAC) with image signal processor and Depth > > and Motion Processing Accelerator (DMPAC) > > * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual > > PRUs and dual RTUs > > * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and > > up to two DPI interfaces. > > * Integrated Ethernet switch supporting up to a total of 8 external ports in > > addition to legacy Ethernet switch of up to 2 ports. > > * System MMU (SMMU) Version 3.0 and advanced virtualisation > > capabilities. > > * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems, > > 16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI, > > I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. > > * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL > > management. > > * Configurable L3 Cache and IO-coherent architecture with high data throughput > > capable distributed DMA architecture under NAVSS > > * Centralized System Controller for Security, Power, and Resource > > Management (DMSC) > > > > See J721E Technical Reference Manual (SPRUIL1, May 2019) > > for further details: http://www.ti.com/lit/pdf/spruil1 > > > > Signed-off-by: Nishanth Menon <nm@ti.com> > > --- > > Documentation/devicetree/bindings/arm/ti/k3.txt | 3 +++ > > 1 file changed, 3 insertions(+) > > Okay for now, but please convert K3 and other TI SoCs to schema soon. > > Reviewed-by: Rob Herring <robh@kernel.org> Thanks Rob. Will do the change to rst soon (hopefully post in the 5.3 window). -- Regards, Nishanth Menon
Hi, This series adds support for the latest new SoC, J721E, from Texas Instruments. The series is an based off v5.2-rc1 and has the following driver dependencies for a successful boot: 1. https://lore.kernel.org/lkml/20190429131533.25122-1-afd@ti.com (for newer firmware) 2. https://lore.kernel.org/linux-arm-kernel/1555093342-428-1-git-send-email-t-kristo@ti.com/ - Clock IDs cannot be guarenteed to be sequential, has to be discovered from hardware description in dts - Clock IDs on this massive chip also exceeds 255, so, the support for the same is expected in follow on patches. The full series is available here (including dependencies): https://github.com/nmenon/linux-2.6-playground/commits/upstream/v5.2-rc1/j7es-base-v1 Boot Log: https://pastebin.ubuntu.com/p/j3NtfF8FQr/ NOTE: - If Greg is ok, we can pick up the uart compatibility via the k3 tree, else, I can spawn it off the series. - I will resubmit patch 6 (defconfig update) separately once again once patches 1-5 hit the next tree or for 5.3-rc2 which ever is convenient. The J721E SoC belongs to the K3 Multicore SoC architecture platform for automotive applications such as infotainment, cluster, premium Audio, Gateway, industrial and a range of broad market applications. This SoC is designed around reducing the system cost by eliminating the need of an external system MCU and is targeted towards ASIL-B/C certification/requirements in addition to allowing complex software and system use-cases. The Linux development follows AM654 in most of the configurations, but adds new capabilities (details in follow on patches). See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: http://www.ti.com/lit/pdf/spruil1 Nishanth Menon (6): dt-bindings: arm: ti: Add bindings for J721E SoC dt-bindings: serial: 8250_omap: Add compatible for J721E UART controller arm64: dts: ti: Add Support for J721E SoC soc: ti: Add Support for J721E SoC config option arm64: dts: ti: Add support for J721E Common Processor Board arm64: defconfig: Enable TI's J721E SoC platform .../devicetree/bindings/arm/ti/k3.txt | 3 + .../bindings/serial/omap_serial.txt | 1 + arch/arm64/boot/dts/ti/Makefile | 2 + .../dts/ti/k3-j721e-common-proc-board.dts | 50 +++++ arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 202 ++++++++++++++++++ .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 72 +++++++ arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 29 +++ arch/arm64/boot/dts/ti/k3-j721e.dtsi | 176 +++++++++++++++ arch/arm64/configs/defconfig | 1 + drivers/soc/ti/Kconfig | 5 + 10 files changed, 541 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j721e.dtsi -- 2.21.0.777.g83232e38648b