mbox series

[RESEND,v4,0/3] Add Richtek RT9471 3A battery charger support

Message ID 1662965823-17760-1-git-send-email-u0084500@gmail.com
Headers show
Series Add Richtek RT9471 3A battery charger support | expand

Message

cy_huang Sept. 12, 2022, 6:57 a.m. UTC
From: ChiYuan Huang <cy_huang@richtek.com>

This patch set is to add Richtek RT9471 charger support.

The RT9471/D is a highly-integrated 3A switch mode battery charge management
and system power path management device for single cell Li-Ion and Li-polymer
battery. The low impedance power path optimizes switch-mode operation
efficiency, reduces battery charging time and extends battery life during
discharging phase.

Since v4:
- Remove the line for the owner field in driver.
- Add the documentation for sysfs entries.

Since v3:
- Move unevaluatedProperties line after $ref for binding patch.
- Add Reviewed-by tag for binding patch.

Since v2:
- Remove the properties for interrupt controller things in the binding documentation.
- Fix dtc error for typo, it's 'regulator-name', not 'regulator-compatible'.
- Add regulator min/max microamp to allow otg vbus current adjustable in example.
- Specify the active-level for charge-enable-gpios in binding example.
- Fix checkpatch error about 'foo * bar' to 'foo *bar' in psy_device_to_chip function.
- Specify the member name directly for the use of linear range.

ChiYuan Huang (3):
  dt-bindings: power: supply: Add Richtek RT9471 battery charger
  power: supply: rt9471: Add Richtek RT9471 charger driver
  Documentation: power: rt9471: Document exported sysfs entries

 Documentation/ABI/testing/sysfs-class-power        |  44 +
 .../bindings/power/supply/richtek,rt9471.yaml      |  73 ++
 drivers/power/supply/Kconfig                       |  16 +
 drivers/power/supply/Makefile                      |   1 +
 drivers/power/supply/rt9471.c                      | 952 +++++++++++++++++++++
 drivers/power/supply/rt9471.h                      |  76 ++
 6 files changed, 1162 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml
 create mode 100644 drivers/power/supply/rt9471.c
 create mode 100644 drivers/power/supply/rt9471.h