mbox series

[v3,00/14] Add some DRM bridge drivers support for i.MX8qm/qxp SoCs

Message ID 1611737488-2791-1-git-send-email-victor.liu@nxp.com
Headers show
Series Add some DRM bridge drivers support for i.MX8qm/qxp SoCs | expand

Message

Liu Ying Jan. 27, 2021, 8:51 a.m. UTC 
Hi,

This is the v3 series to add some DRM bridge drivers support
for i.MX8qm/qxp SoCs.

The bridges may chain one by one to form display pipes to support
LVDS displays.  The relevant display controller is DPU embedded in
i.MX8qm/qxp SoCs.

The DPU KMS driver can be found at:
https://www.spinics.net/lists/arm-kernel/msg871357.html

This series supports the following display pipes:
1) i.MX8qxp:
prefetch eng -> DPU -> pixel combiner -> pixel link ->
pixel link to DPI(PXL2DPI) -> LVDS display bridge(LDB)

2) i.MX8qm:
prefetch eng -> DPU -> pixel combiner -> pixel link -> LVDS display bridge(LDB)


Patch 1/14 adds LVDS PHY configuration options, which has already been sent
with the following series to add Mixel combo PHY found in i.MX8qxp:
https://www.spinics.net/lists/arm-kernel/msg862560.html

Patch 2/14 and 3/14 add bus formats used by PXL2DPI.

Patch 4/14 ~ 13/14 add drm bridge drivers and dt-bindings support for the bridges.

Patch 14/14 updates MAINTAINERS.


I've tested this series with a koe,tx26d202vm0bwa dual link LVDS panel and
a LVDS to HDMI bridge(with a downstream drm bridge driver).


Welcome comments, thanks.

v2->v3:
* Drop 'fsl,syscon' DT properties from fsl,imx8qxp-ldb.yaml and
  fsl,imx8qxp-pxl2dpi.yaml. (Rob)
* Mention the CSR module controls LDB and PXL2DPI in fsl,imx8qxp-ldb.yaml and
  fsl,imx8qxp-pxl2dpi.yaml.
* Call syscon_node_to_regmap() to get regmaps from LDB bridge helper driver
  and PXL2DPI bridger driver instead of syscon_regmap_lookup_by_phandle().
* Drop two macros from pixel link bridge driver which help define functions
  and define them directly.
* Properly disable all pixel link controls to POR value by calling
  imx8qxp_pixel_link_disable_all_controls() from
  imx8qxp_pixel_link_bridge_probe().
* Add Rob's R-b tags on patch 4/14 and 6/14.

v1->v2:
* Rebase the series upon the latest drm-misc-next branch(5.11-rc2 based).
* Use graph schema in the dt-bindings of the bridges. (Laurent)
* Require all four pixel link output ports in fsl,imx8qxp-pixel-link.yaml.
  (Laurent)
* Side note i.MX8qm/qxp LDB official name 'pixel mapper' in fsl,imx8qxp-ldb.yaml.
  (Laurent)
* Mention pixel link is accessed via SCU firmware in fsl,imx8qxp-pixel-link.yaml.
  (Rob)
* Use enum instead of oneOf + const for the reg property of pixel combiner
  channels in fsl,imx8qxp-pixel-combiner.yaml. (Rob)
* Rewrite the function to find the next bridge in pixel link bridge driver
  by properly using OF APIs and dropping unnecessary DT validation. (Rob)
* Drop unnecessary port availability check in i.MX8qxp pixel link to DPI
  bridge driver.
* Drop unnecessary DT validation from i.MX8qxp LDB bridge driver.
* Use of_graph_get_endpoint_by_regs() and of_graph_get_remote_endpoint() to
  get the input remote endpoint in imx8qxp_ldb_set_di_id() of i.MX8qxp LDB
  bridge driver.
* Avoid using companion_port OF node after putting it in
  imx8qxp_ldb_parse_dt_companion() of i.MX8qxp LDB bridge driver.
* Drop unnecessary check for maximum available LDB channels from
  i.MX8qm LDB bridge driver.
* Mention i.MX8qm/qxp LDB official name 'pixel mapper' in i.MX8qm/qxp LDB
  bridge drivers and Kconfig help messages.

Liu Ying (14):
  phy: Add LVDS configuration options
  media: uapi: Add some RGB bus formats for i.MX8qm/qxp pixel combiner
  media: docs: Add some RGB bus formats for i.MX8qm/qxp pixel combiner
  dt-bindings: display: bridge: Add i.MX8qm/qxp pixel combiner binding
  drm/bridge: imx: Add i.MX8qm/qxp pixel combiner support
  dt-bindings: display: bridge: Add i.MX8qm/qxp display pixel link
    binding
  drm/bridge: imx: Add i.MX8qm/qxp display pixel link support
  dt-bindings: display: bridge: Add i.MX8qxp pixel link to DPI binding
  drm/bridge: imx: Add i.MX8qxp pixel link to DPI support
  drm/bridge: imx: Add LDB driver helper support
  dt-bindings: display: bridge: Add i.MX8qm/qxp LVDS display bridge
    binding
  drm/bridge: imx: Add LDB support for i.MX8qxp
  drm/bridge: imx: Add LDB support for i.MX8qm
  MAINTAINERS: add maintainer for DRM bridge drivers for i.MX SoCs

 .../bindings/display/bridge/fsl,imx8qxp-ldb.yaml   | 173 +++++
 .../display/bridge/fsl,imx8qxp-pixel-combiner.yaml | 144 +++++
 .../display/bridge/fsl,imx8qxp-pixel-link.yaml     | 106 +++
 .../display/bridge/fsl,imx8qxp-pxl2dpi.yaml        | 102 +++
 .../userspace-api/media/v4l/subdev-formats.rst     | 156 +++++
 MAINTAINERS                                        |  10 +
 drivers/gpu/drm/bridge/Kconfig                     |   2 +
 drivers/gpu/drm/bridge/Makefile                    |   1 +
 drivers/gpu/drm/bridge/imx/Kconfig                 |  52 ++
 drivers/gpu/drm/bridge/imx/Makefile                |   6 +
 drivers/gpu/drm/bridge/imx/imx-ldb-helper.c        | 248 +++++++
 drivers/gpu/drm/bridge/imx/imx8qm-ldb.c            | 585 +++++++++++++++++
 drivers/gpu/drm/bridge/imx/imx8qxp-ldb.c           | 719 +++++++++++++++++++++
 .../gpu/drm/bridge/imx/imx8qxp-pixel-combiner.c    | 452 +++++++++++++
 drivers/gpu/drm/bridge/imx/imx8qxp-pixel-link.c    | 426 ++++++++++++
 drivers/gpu/drm/bridge/imx/imx8qxp-pxl2dpi.c       | 488 ++++++++++++++
 include/drm/bridge/imx_ldb_helper.h                |  98 +++
 include/linux/phy/phy-lvds.h                       |  48 ++
 include/linux/phy/phy.h                            |   4 +
 include/uapi/linux/media-bus-format.h              |   6 +-
 20 files changed, 3825 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
 create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
 create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
 create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
 create mode 100644 drivers/gpu/drm/bridge/imx/Kconfig
 create mode 100644 drivers/gpu/drm/bridge/imx/Makefile
 create mode 100644 drivers/gpu/drm/bridge/imx/imx-ldb-helper.c
 create mode 100644 drivers/gpu/drm/bridge/imx/imx8qm-ldb.c
 create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-ldb.c
 create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-pixel-combiner.c
 create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-pixel-link.c
 create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-pxl2dpi.c
 create mode 100644 include/drm/bridge/imx_ldb_helper.h
 create mode 100644 include/linux/phy/phy-lvds.h

Comments

Rob Herring (Arm) Feb. 9, 2021, 6:31 p.m. UTC | #1 
On Wed, 27 Jan 2021 16:51:25 +0800, Liu Ying wrote:
> This patch adds bindings for i.MX8qm/qxp LVDS display bridge(LDB).
> 
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> ---
> v2->v3:
> * Drop 'fsl,syscon' property. (Rob)
> * Mention the CSR module controls LDB.
> 
> v1->v2:
> * Use graph schema. (Laurent)
> * Side note i.MX8qxp LDB official name 'pixel mapper'. (Laurent)
> 
>  .../bindings/display/bridge/fsl,imx8qxp-ldb.yaml   | 173 +++++++++++++++++++++
>  1 file changed, 173 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>