mbox series

[RFC,v2,0/3] Add QTI QFPROM-Efuse driver support

Message ID 1591868882-16553-1-git-send-email-rbokka@codeaurora.org
Headers show
Series Add QTI QFPROM-Efuse driver support | expand

Message

Ravi Kumar Bokka June 11, 2020, 9:47 a.m. UTC 
This patch series adds qfprom-efuse controller driver support.

This driver can access the raw qfprom regions for fuse blowing.

The current existed qfprom driver is only supports for cpufreq, thermal sensors
drivers by read out calibration data, speed bins..etc which is stored by
qfprom efuses.

Ravi Kumar Bokka (3):
  dt-bindings: nvmem: Add devicetree bindings for qfprom-efuse
  drivers: nvmem: Add QTI qfprom-efuse support
  arm64: dts: qcom: sc7180: Add qfprom-efuse

 .../devicetree/bindings/nvmem/qfprom.yaml          |  52 +++
 arch/arm64/boot/dts/qcom/sc7180-idp.dts            |   4 +
 arch/arm64/boot/dts/qcom/sc7180.dtsi               |  10 +-
 drivers/nvmem/Kconfig                              |   1 +
 drivers/nvmem/qfprom.c                             | 405 +++++++++++++++++++--
 5 files changed, 449 insertions(+), 23 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/nvmem/qfprom.yaml